• 한국태양에너지학회 논문집
• /
• 제21권4호
• /
• pp.63-71
• /
• 2001

This work has been carried out to find the ideal operating conditions for solar vacuum tube collectors which are widely used at present. Various types of solar collectors including a flat plate one were experimentally tested and examined to determine their thermal efficiencies and operating characteristics. Generally, solar vacuum tubes can be classified into two groups according to their design features. Of these, one is characterized by the insertion of a metallic device(such as a finned heat pipe) in an evacuated glass tube for the collection and transportation of solar energy. The other utilizes double glass tubes where the smaller one is contained inside the bigger one and soldered to each other after the small gap between them is evacuated. Both of these solar collectors are designed to minimize convection heat losses by removing the air which is in direct contact with the absorber surface. The performance of the former type can be readily analyzed by applying the relevant correlations developed for flat plate solar collectors. This has been demonstrated in the present study for the case of a solar collector where a heat pipe is inserted in an evacuated tube.

• 박물관보존과학
• /
• 제26권
• /
• pp.143-160
• /
• 2021

한성백제박물관에서는 백제 한성기 대표적인 왕실과 중앙세력의 분묘군으로 알려진 사적 제243호 석촌동 고분군의 학술 발굴조사를 실시하고 있으며, 그 과정에서 출토된 금제이식의 과학적 분석 및 보존처리를 실시하였다. 분석은 실체현미경 관찰, SEM, X-선 촬영, CT, XRF 분석을 실시하였고, 이를 통해 유물 특성, 내부 구조와 성분 등을 확인하고 제작 기법을 알아보고자 하였다. 연구결과, 금동이식의 주환은 동심재에 수은 아말감 금도금하였고, 중간식의 육면체는 금 분말을 용융시켜 소환을 이어 붙였으며 수하식 구체는 반구체 두 개를 땜하여 붙인 것을 확인하였다. 세환이식 2건은 표면 성분이 서로 유사하지만 동심재에 금판을 감싸 제작한 것과 금봉을 구부려 제작한 것으로 제작기법에 차이가 있음을 밝혔다. 금 함량은 유물에 따라, 측정 위치에 따라 다르지만 약 19~21K로 비교적 높은 금 함량을 보이며 정교한 공예기술로 만들어진 이식이라는 점에서 피장자의 우월적 지위와 석촌동 고분군의 위상을 판단할 수 있는 자료가 될 것으로 보인다.

• Imaging Science in Dentistry
• /
• 제44권2호
• /
• pp.149-154
• /
• 2014

Purpose: This study assessed the effectiveness of three antimicrobial mouthrinses in reducing microbial growth on photostimulable phosphor (PSP) plates. Materials and Methods: Prior to performing a full-mouth radiographic survey (FMX), subjects were asked to rinse with one of the three test rinses ($Listerine^{(R)}$, $Decapinol^{(R)}$, or chlorhexidine oral rinse 0.12%) or to refrain from rinsing. Four PSP plates were sampled from each FMX through collection into sterile containers upon exiting the scanner. Flame-sterilized forceps were used to transfer the PSP plates onto blood agar plates (5% sheep blood agar). The blood agar plates were incubated at $37^{\circ}C$ for up to 72 h. An environmental control blood agar plate was incubated with each batch. Additionally, for control, 25 gas-sterilized PSP plates were plated onto blood agar and analyzed. Results: The mean number of bacterial colonies per plate was the lowest in the chlorhexidine group, followed by the Decapinol, Listerine, and the no rinse negative control groups. Only the chlorhexidine and Listerine groups were significantly different (p=0.005). No growth was observed for the 25 gas-sterilized control plates or the environmental control blood agar plates. Conclusion: The mean number of bacterial colonies was the lowest in the chlorhexidine group, followed by the Decapinol, Listerine, and the no rinse groups. Nonetheless, a statistically significant difference was found only in the case of Listerine. Additional research is needed to test whether a higher concentration (0.2%) or longer exposure period (two consecutive 30 s rinse periods) would be helpful in reducing PSP plate contamination further with chlorhexidine.

• 대한조선학회논문집
• /
• 제56권2호
• /
• pp.128-134
• /
• 2019

In shipbuilding, accurate fabrication of curved hull plates is one of the most important steps, since the shape of ship hull, which is very critical in the overall performance of a ship, is a collection of such plates. The curved hull plates forming process requires a significant amount of time by skilled workers in shipbuilding. In general, the workers cause thermal distortion in the plate and forming initial shape using gas heat source. So shipbuilding companies need skilled workers who have long experience. To solve the problem, a lot of researchers tried to develop automation system for curved hull plates. In this paper, we propose automatic heating system with gantry robot, high frequency induction heater to replace the gas heat source and automatic measurement system. We apply the system to forming concave type plate that is actually used in ship manufacturing. In addition, a system was developed to automatically generate heating information, such as the heating location and the heating speed, for actual heating process. Then the system was applied to the actual heating material. It is shown that the proposed triangle heating pattern makes desired concave shape successfully. The induction heating system showed that it can be used for automation system of curved hull plates forming process replacing gas heat source.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1996년도 추계학술발표회 논문집
• /
• pp.171-175
• /
• 1996

thermal diode is a device which allows heat to be transferred in one direction by convection due to difference of density of fluid. Vertical plate for heat collection and radiation are of utility for design of thermal diode. It was considered the transient process of air filled thermal diode with guide vane which combined rectangular and parallelogrammic shape enclosures. Gr was kept constantly on 1.60$\times$1010 and error range was $\pm$2% during the experiment. Nu was examined when inclined angle are 15$^{\circ}$and 45$^{\circ}$and, also the experiments was carried out with and without guide vane as well. Specially, The effect of guide vane was sensitive. Developed region inclined angle, which is characteristic of system.

• 소음진동
• /
• 제6권3호
• /
• pp.287-296
• /
• 1996

A virtual work form of flexible multibody dynamic formulation with rotary inertia has been derived. For the analysis of large flexible multibody systems, deformation modal coordinates have been employed to represent coupled motion between gross and vibrational motion. For the efficient evaluation of the entries in the mass matrix, a flexible body has been treated as a collection of mass points. The rotary inertia was generated from the consistent mass matrix in a finite element model. Deformation mode shapes were obtained from finite element analysis. Bending and twisting vibration analyses of a cantilever have been carried out to see rotary inertia effects. A space flexible robot simulation has been also carried out to show effectiveness of the proposed formulation. This formulation is effective to the model that consists of beam, plate, or shell element that contains rotational degree of freedom at the nodal point. It is also effective to the flexible body model to which a large lumped rotary inertia is attached.

• 한국조경학회지
• /
• 제25권3호
• /
• pp.111-123
• /
• 1997

In order to understand the spatial forms of stream, this study aimed to typify stream microtopography through the collection of common names of topography determined by fishermen and to describe stream landscapes by using these typology. The seventeen stream microtopography names were sorted out and divided into three types : the streamside space which includes Kaeul-jari, Hapsu-mori, Cholpyok-jidae, Kyekok-jidae and Korpuri, stream plate which includes Youl, Mulgol, So and Ungdongi, and streambed materials which includes Ampan-jidae, Pawi-jidae, Dolpat-jidae, Chagal-jidae, Chanchgal-jidae, Moraetop, Kamtang-padak and Suchodae. The spatial characteristics of stream microtopography landscape were described according to the comparison of landform, the support of fishing, accessibility, viewpoint and eye-catching degree. The tipification of stream microtopography and their symbolization will offer a rich vocabulary to describe diverse spatial forms of stream.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 토목섬유기술위원회 학술세미나 논문집
• /
• pp.45-54
• /
• 2001

In this study, slope stability analysis of LCRS(Leachate Collection Removel System) in waste landfill was peformed by large scale field test. Geocomat is new type of geocomposite product. Gecomat is a sort of Geocomposite product. It is composed of nonwoven geotextiles, woven geotextile, and geonet. Large scale field tests were performed on the slope of different two LCRSsections with static loading condition. One is LCRS section witch consist of GCL, HDPE and Geocomat, another is GCL, HDPE, and woven type geocomposite. The behavior of geosynthetics lined slope was monitored by incorporating instrumentation including vertical soil pressure meter, settlement plate, strain gauges, potential meter, displacement pin.. Based on the field monitoring, the Geocomat LCRS section is less sliding than the conventional geocomposite LCRS section.

• 대한기계학회논문집B
• /
• 제34권1호
• /
• pp.27-34
• /
• 2010

본 연구에서는 순환방식의 1000 CMH급 전기집진장치 성능평가 시스템 구축하여, 대용량 순산소 연소 장치 없이 순산소 연소가스 모사 조건(고농도 $CO_2$ 조건)에서 엣지-평판형 전기집진장치를 방전극 형상, 집진판 간격, 유입속도, 가스조성 및 분진 입경에 따라 성능을 평가하였다. $CO_2$ 70% 조건에서 3 종 방전극에 대해 성능 비교를 한 결과, 방전극 편 면적이 넓은 방전극이 상대적으로 높은 포집효율을 나타내었다. 또한 유입속도가 감소할수록, 분진 입경이 증가할수록, 집진판 간격이 좁을수록 분진 집진 효율이 증가하였으나, $CO_2$ 농도가 증가할수록 효율이 감소하였다. 그러므로 $CO_2$ 농도가 높을 것으로 예상되는 순산소 연소 등 배기가스 조건에 적용되는 전기집진장치를 설계할 경우, 기존과 동일한 단위 가스 체적 당 코로나 전력 조건에서 집진장치 내부 유속을 줄이거나 집진판 간격을 좁히는 설계변화가 요구되며, 방전극의 경우 방전편 면적이 넓으면서 코로나 전류가 높은 방전극이 적용되야 할 것으로 판단된다.

• 대한전자공학회논문지TC
• /
• 제43권9호
• /
• pp.99-104
• /
• 2006

본 논문에서는 기존의 2차원적 metamaterial 구조의 교차 편파 효과에 의한 차폐 특성의 열화를 개선하기 위하여 LTCC(Low Temperature Cofired Ceramic) 공정을 이용한 3-D 공진기 구조를 제안하였다. 제안된 3-D 공진기 구조는 X축, Y축, Z축 방향을 갖는 두 개의 평판과 하나의 비아로 구성된 2차원적 병렬 공진기들로 구성되어 있다. 제안된 3-D 공진기 구조의 공진 주파수는 5.024GHz, 차단 대역폭은 19MHz를 나타내었다. 교차 편파에서 3-D 공진기 구조의 공진 주파수는 4.825GHz, 차단 대역폭은 19MHz를 나타내었다. 제안된 3-D 공진기 구조는 교차 편파 효과에 따른 차폐 특성의 열화를 개선하였다. 향후 콘크리트 구조물에 흡수재와 함께 적용하므로 ETCS(Electric Toll Collection System)의 신호 간섭 현상을 차단할 수 있을 것으로 사료된다.