• Journal of the Korean Society for information Management
• /
• v.37 no.2
• /
• pp.285-310
• /
• 2020

This paper analyzed SCOAP3 journals, which have been evaluated as successful open access models, to understand the characteristics of scholarly communication among domestic researchers in the field of high energy physics (HEP). As research methods, a quantitative analysis using statistics and a network analysis of authors' affiliated institutions and academic journals were conducted to understand collaboration and research activities of domestic researchers in the HEP field. The results of the study revealed that, among the 10 SCOAP3 journals in which Korean researchers participated, the proportion of articles in which Korean authors participated was 8.0% of the total. The proportion of papers with more than 1,000 co-authors per paper was 28.7% of the total. The results of this analysis proved that Korean researchers were actively collaborating in the HEP global network. From the results of the network analysis to understand the cooperative relationship centered on the affiliated organization, the cooperative network could be divided into three clusters: a cluster centered on S universities, a cluster centered on K research institutes that provided researchers a cooperative infrastructure with CERN, and a cluster centered on I research institute. Through the network analysis for research institutes and journals, it was found that JHEP, PRD, and PLB among academic journals were highly participating journals, and universities and researchers were also participating in the writing of open access papers. The results of this study can be used as a basic resource for understanding researchers and building a research information environment in libraries.

• Journal of Korea Water Resources Association
• /
• v.53 no.5
• /
• pp.347-356
• /
• 2020

The main objective of the study is to propose the most efficient SWAT model calibration method using SWAT-CUP with less computing time and high performance. In order to achieve the goal, Case1-3 (250, 500, and 1,000 simulation runs) and Case4 (1,000 simulation runs in the first iteration and then 500 simulation runs for the following iterations) were defined to compare the results. When evaluating the values of the objective function, Case2 and Case3 reached the same value after the fourth iteration, and Case1 reached the closed value of Case2-3 after the eighth iteration. However, the final estimates of the parameters had different ranges in Cases1-3, and only the results of Case3 and Case4 converged similarly. Thus, it can be considered that the parameter calibration results are highly affected by the initial number of simulation runs. On the other hand, SWAT simulation results did not show the significant difference after the first iteration, unlike the parameter ranges. From the analysis results, we can conclude that the most suitable and effective method was to repeat one or two times of iterations with a sufficient number of simulation runs, as in Case4.

• International Commerce and Information Review
• /
• v.18 no.2
• /
• pp.131-150
• /
• 2016

As global partnership is recently getting important in order to establish supply chain network in global managing environment, companies tend to improve quality and warranty in SCM(Supply Chain Management) by certifying ISO(International Organization for Standardization). This research investigated structural relationship how strategic and operational ISO application level and trust, immersion, collaborative factors in partnership process affect to companies business performance. This research was surveyed with 147 manufacturing companies in South Korea and conducted empirical analysis using Structural equation model. The research hypothesis and model was derived from the basis of existing theory and empirical research, and obtained the following results. Firstly, the strategic ISO level showed positive(+) effect on trust and immersion factor. Second, the operational ISO level showed positive(+) effect on trust and collaborative factor. Third, trust factor in the partnership process showed positive(+) effect on immersion factor. Lastly, collaborative factor in partnership process showed positive(+) effect on companies business performance. Implication for this research is that companies must consider ISO application in establishing partnership and companies require prolonged effort using trust, immersing, collaborative factors into partnership process to improve business performance.

• Journal of Agricultural Extension & Community Development
• /
• v.21 no.4
• /
• pp.1227-1259
• /
• 2014

This paper explores agricultural extension systems, extension challenges, research and extension models, governance structures of agricultural extension and advisory services in Sudan. Agricultural extension services in Sudan are provided by a variety of governmental department and corporation. The Technology Transfer and Extension Administration under the Ministry of Agriculture and Irrigation, had been launched during mid 2000's aims at making extension systems farmer driven and farmer accountable by way of new institutional arrangements for technology dissemination in the form of community participation approach at the state level, to make the extension reforms have the active participation of farmers/farmer groups. The main problem facing agricultural extension services in developing countries is poor link between extension organization and research. Both extension administration and Agricultural Research Corporation (ARC) are operating as departments of ministry of Agricultural and irrigation for very long time. There are three recommendations to achieve the effectiveness of the Agricultural Research Corporations (ARC) in reaching farmers. Firstly, extension staff members should be assigned to every ARC station. Secondly, the ARC might increase positions for Agricultural development specialist or Farming System Research (FSR) specialist. Their role would be to reflect the needed of farmer and translate them to the researchable topics. Thirdly, researcher should conduct more research on farmer's fields.

• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.271-305
• /
• 2020

An effect of coupled thermo-hydro-mechanical and chemical (THMC) behavior is an essential part of the performance and safety assessment of geological disposal systems for high-level radioactive waste and spent nuclear fuel. Furthermore, numerical models and modeling techniques are necessary to analyze and predict the coupled THMC behavior in the disposal systems. However, phenomena associated with the coupled THMC behavior are nonlinear, and the constitutive relationships between them are not well known. Therefore, it is challenging to develop numerical models and modeling techniques to analyze and predict the coupled THMC behavior in the geological disposal systems. It is also difficult to verify and validate the development of the models and techniques because it requires expensive laboratory tests and in-situ experiments that need to be performed for a long time. DECOVALEX was initiated in 1992 to efficiently develop numerical models and modeling techniques and validate the developed models and techniques against the lab and in-situ experiments. In Korea, Korea Atomic Energy Research Institute has participated in DECOVALEX-2011, DECOVALEX-2015, and DECOVALEX-2019 since 2008. In this study, all tasks in the three DECOVALEX projects were introduced to the researcher in the field of rock mechanics and geotechnical engineering in Korea.

• Journal of Technology Innovation
• /
• v.18 no.1
• /
• pp.75-98
• /
• 2010

The purpose of this paper is to give policy implications for relevant policy-makers by analyzing factors affecting performance of industrial R&D programs of the Ministry of Knowledge Economy. The independent variables are type of project leader organization(Big Enterprises, SMEs, Ventures Businesses, Public Research Institutions, Universities), cooperative or noncooperative R&D among industry-university-research institution, total number of project participant organization, total R&D investment, and the ratio of private investment to total R&D investment. The dependent variables are domestic or foreign patents granted and domestic or foreign papers accepted. The method of analysis is Poisson Regression analysis operated by STATA. The results of this research are follows ; Universities show higher R&D performance compared to enterprises or public research institutions in terms of patents and papers as well. Venture businesses show higher patent performance compared to SMEs. Inverted U-shaped relationship between total number of project participant organization and R&D performance is not supported. The higher total R&D investment, the higher R&D performance. The higher the ratio of private investment to total R&D investment, the higher R&D performance.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.5-6
• /
• 2002

The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.

• Informatization Policy
• /
• v.25 no.3
• /
• pp.3-28
• /
• 2018

The purpose of this study is to analyze the research trends and present future research directions in the field of Cyber Physical System (CPS), a key element in the 4th Industrial Revolution, Industry 4.0, and Smart Manufacturing that are currently promoted as important innovation agenda both at home and abroad. In this study, (1) the concepts of industry 4.0, smart manufacturing and CPS are summarized; (2) analysis criteria of these fields are established; and 3) analysis results are presented and future research direction is proposed. 74 overseas and 8 domestic literature on manufacturing CPS from 2013 to 2017 are identified through 'Google Scholar Search'. Major results of the analysis are summarized as follows: (1) research on a common methodology and framework for the manufacturing CPS needs to be done based on the analysis of the existing methodologies and frameworks of various perspectives; (2) in order to improve the maturity of the manufacturing CPS, it is necessary to study actual deployment and operations of CPS, including the existing systems; (3) it is necessary to study the diagnostic methodology that can evaluate manufacturing CPS and suggest improvement strategy; and (4) as for the detailed model and tool, it is necessary to reinforce research on SCM production planning and human-machine collaboration while considering the characteristics of CPS.

• Journal of Agricultural Extension & Community Development
• /
• v.10 no.2
• /
• pp.267-283
• /
• 2003

The purposes of the study were to; 1) examine the diffusion and adoption of new agricultural technology in rice farming, 2) survey the status of agricultural education institutions on technology transfer, and 3) explore the linkages between agricultural education and extension for more effective reinforcement strategies to further the diffusion and adoption of new agricultural technology in Korea. Literature review, field survey and panel discussions were employed to strengthen the linkages among agricultural education, research and extension in Korea. As the results of analysis of the diffusion and adoption of new agricultural technology in rice farming following recommendations were offered; 1. Extension services have helped Korean farmers in achieving self-sufficiency in rice and year-round supply of green vegetables as well as upbringing rural youth, however, government changed the status of extension educators from central government staff to county/city government staff since 1997. This brought about various problems such as: decreased morale and number of extension educators, thus weakening the extension education function, weakened linkages between national and local extension offices, less opportunity for in-service education of extension educators, and weakened linkages between agricultural research and extension, etc. 2. In order to insure that extension educators are high caliber professional individuals, it is crucial to establish a system that nationally recognizes these individuals as such, and that provides a professional development path. It is important to restore the morale of extension educators to continually achieve the national goals of food production, balanced national development and preservation of environment, at the same time to meet increasing needs of farmers. 3. Because of the critical importance of diffusing innovations to agricultural producers in order to ensure quality and steady food supply, it is crucial that these issues be addressed before the extension service further deteriorates. Further research activities on agricultural extension should be conducted for more effective agricultural extension system in Korea to achieve a greater rural, national and regional development. 4. Research and implementation activities should be emphasized and encouraged to improve the cooperation and collaboration among agricultural education research and extension to better serve farmers' educational and information needs. National level research activities should be encouraged to improve the effectiveness of agricultural technology transfer including internet education programs for farmers in Korea.

• Geophysics and Geophysical Exploration
• /
• v.13 no.4
• /
• pp.407-415
• /
• 2010

MT soundings were carried out in 2008, in northern Victoria, Australia, as a continuing collaboration research of 2007 between Republic of Korea, Australia, and Japan. The main purpose of this research is to investigate electrical conductivity structure and thus help understanding of tectonic structure in central Victoria, which is believed to be closely linked to mineralization and magmatic processes of this region. The survey area is located in western Lachlan Fold Belts, which is the part of Tasman Fold Belts in southeastern Australia. An MT profile of 2008 is almost parallel to the one of 2007 and approximately 50 km away. The 2D inversion result of MT data also shows that the position of conductivity discontinuity near surface are well matched with the positions of major faults, such as Avoca Fault, which is the structural boundary between Stawell and Bendigo Zones, and Heathcote Fault Zone, which marks the boundary between Bendigo and Melbourne Zones. It is also confirmed from resistivity image that internal faults in Bendigo Zone are in listric form, which is implied to be formed by structural shortening during compressional orogenic activity in Silurian.