• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.8
• /
• pp.1080-1087
• /
• 2004

A trial with twenty-four newly weaned Awassi lambs (initial body weight=21.5$\pm$0.8 kg) was conducted using a 3$\times$2 factorial design to study the effect of feeding three sources of protein supplements (soybean meal (SBM), sunflower seed meal (SSM), and cottonseed meal (CSM)), either untreated or formaldehyde-treated on the growth performance and carcass traits of Awassi lambs. Lambs were randomly assigned to one of the six diets (4 lambs/treatment diet) and were individually fed for a period of 107 days. Experimental diets were isonitrogenous and isocaloric. Final live weight and average daily gain (ADG) were affected by both source of protein and formaldehyde treatment (undegradable protein). Lambs fed untreated diets had better (p<0.01) daily gain compared to those fed formaldehyde-treated diets. Similarly total feed intake per animal was significantly (p<0.05) affected by protein source and formaldehyde treatment. Formaldehyde treatment caused a significant decrease (p<0.01) in feed intake compared to lambs fed untreated diets. Feed requirement per unit of gain was not affected by formaldehyde treatment during all periods of the experiment except for the second period (the second 28 day period), whereby untreated SBM, SSM and CSM had better feed conversion ratio (FCR) than the treated groups. Source of protein had a moderate effect (p<0.10) on FCR but had a significant effect (p<0.05) on hot and cold carcass weight, digestive tract empty weight and liver weight, with lambs fed SBM having higher values than lambs fed SSM and CSM diets. Supplementation with undegradable protein had a significant effect (p<0.05) on dressing-out percentage (p<0.05), final live weight, and hot and cold carcass weight (p<0.01). The lower values pertain to lambs fed treated diets compared to lambs fed untreated diets. In general, there were no significant differences among all carcass linear dimensions, carcass cut weights and dissected loin tissue weights for both treatments (protein source and formaldehyde treatment). Supplementation with undegradable protein but not the source of protein resulted in significantly higher dissected leg total bone weight (p<0.05), tibia and femur weight (p<0.05), and femur length (p<0.01) at the same carcass weight. Results suggest that the treatment of SBM, SSM and CSM with formaldehyde did not improve efficiency of feed utilization, lamb performance or carcass traits and that the SBM diet resulted in an increase in lamb performance compared to other experimental diets.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.4
• /
• pp.529-536
• /
• 2018

Objective: Fresh sugarcane has been a new roughage source for ruminant's in semiarid regions, a function of the decline of sugar and alcohol industry in recent years. However, there is little data published regarding lambs fed sugarcane associated with spineless cactus. This study evaluated the effect of sugarcane replacement with spineless cactus (0%, 33%, 66%, and 100%) in the diet of Santa $In\hat{e}s$ lambs on carcass characteristics. Methods: Thirty-six non-castrated Santa Ines lambs at four months of age and an initial body weight of $22{\pm}2.3kg$ were assigned in a randomized block design and slaughtered after 70 days of confinement. The effects of spineless cactus as a replacement for sugarcane in the diet of the lambs on the carcass characteristics, commercial cut weight and yield, leg tissue composition, and carcass measurements were studied. Results: The study revealed quadratic behavior in slaughter body weight, and hot and cold carcass weight, with maximum values of 38.60, 18.60, and 18.11 kg and replacement levels of 40.18%, 44.42%, and 43.14%, respectively. The cold carcass yield presented an increasing linear behavior. The compactness index of carcass and leg presented a quadratic effect, with estimated maximal values of 0.28 and 0.57 kg/cm and replacement levels of 43.37% and 45.5%, respectively. The weights of commercial cuts of leg, loin, shoulder, and breast showed quadratic behavior, with maximum values of 2.79, 0.852, 1.46, and 1.30 kg and replacement levels of 49.5, 45.32, 39.0, and 40.7, respectively. For tissue composition, quadratic behavior was verified for leg weight, subcutaneous fat, and total fat. Conclusion: The replacement of sugarcane by spineless cactus at level 44% is recommended for finishing lambs considering that this level improved most of the carcass characteristics, weights, and yields of commercial cuts and leg tissue composition.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.34 no.3
• /
• pp.75-84
• /
• 1992

The paper manufactories in Sangpyeong Industrial Estates, Chinju, produce more than 80 tons of paper-mill sludge cakes every day, which costs about 840 million won for dump per year. Since the paper-mill sludge is biodegradable, the sludge can he utilized as an organic fertilizer if it is properly decomposed. This may lead to not only dramatic cut of the treatment cost but prevention from secondary environmental contamination due to dump. The primary objective of the study was to explore the quantitative range of major enviromental parameters influencing early composting of paper-mill cakes, naturally pretreated in warn and cold weather. The automatically-controlled reactor was designed, manufactured, and operated for nine days to decompose about 2201 of raw sludge cakes. Four tests(Test 1-Test 4) were implemented for the study of Phase I. Treatments of two levels of initial temperature (40˚C and 28˚C) and two levels of water content + C/N ratio (35% + 40 and 63% + 80) were made to test the significance of their parameters for decomposition of raw sludge cakes pretreated in warm weather. Another four tests (Test 5- Test 8) were implemented for the study of Phase II. Treatments of initial temperature and water content(W/C) + C/N ratio of raw sludge pretreated in cold weather were made to 16˚C and 13% +58 for Test 5, 6˚C and 53% +55 for Test 6, 7˚C and 36% +81 for Test 7, 31˚C and 30% +81 for Test 8. Natural weater condition(pretreatment condition) revealed the importance m composting of the paper-mill sludge cakes. Combination of water content adjustment to about 30% with C/N ratio amendment of about 20 and initial temperature of 30~40˚C was concluded to be the best for early composting of paper-mill sludge cakes with aeration rate and pH fixed. Temperature and C/N ratio were adapted as judging variables for composting degree. In addition, tests for microbial activity were performed to validate the experimental results. Since the temperature and C/N ratio did not coincide in some tests as judging variables for the maturity of the composting sludges, taking one of these parameters could mislead the concept of the maturity (composting conceptually new criterion to provide more reliable information for early composting of paper-mill sludge cakes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.382-389
• /
• 2019

A novel folding process is proposed using a repeated cold-die forging and annealing to form a sterling silver ring. Sterling silver plate was cut into a doughnut shape, and lattices with 0.43-mm line-width were imprinted on it. The sample was folded by forging using dies with slopes of $45^{\circ}$, $60^{\circ}$, and $75^{\circ}$ and annealing. For comparison, samples were also fabricated without annealing. Strain was identified by measuring the length of lattices. Vernier calipers, a Vickers hardness tester, an optical microscope, and a UV-VIS colorimeter were used to determine the size, hardness, microstructure, and body color. Without annealing, cracks occurred. However, successful deformation was possible when annealing was used. The results of macro strain measurements show that the outer diameter and width decreased, while the inner diameter and thickness increased after the final process. The maximum strain was increased 0.128 toward the parallel direction. The Vickers hardness decreased after annealing and increased after the folding process. The microstructure results showed that the grain size increased after annealing but decreased after folding. The color difference based on the Lab index was under 10 for all processes. Eventually, a doughnut-shaped silver plate was successfully deformed into a ring shape by the folding process.

• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.782-785
• /
• 2021

In this paper, we propose a personalized cooling management system with thermal imaging camera. The proposed equipment uses a thermal imaging camera to control the amount of cold air and the system according to the difference between the user's skin temperature before and after the procedure. When the skin temperature is abnormally low, the cold air supply is cut off to prevent the possibility of a safety accident. It is economical by replacing the skin temperature sensor with a thermal imaging camera temperature measurement, and it can be visualized because the temperature can be checked with the thermal image. In addition, the proposed equipment improves the sensitivity of the sensor that measures the distance to the skin by calculating the focal length by using a dual laser pointer for the safety of a personalized cooling management system to which a thermal imaging camera is applied. In order to evaluate the performance of the proposed equipment, it was tested in an externally accredited testing institute. The first measured temperature range was -100℃~-160℃, indicating a wider temperature range than -150~-160℃(cryo generation/USA), which is the highest level currently used in the field. In addition, the error was measured to be ±3.2%~±3.5%, which showed better results than ±5%(CRYOTOP/China), which is the highest level currently used in the field. The second measured distance accuracy was measured as below ±4.0%, which was superior to ±5%(CRYOTOP/China), which is the highest level currently used in the field. Third, the nitrogen consumption was confirmed to be less than 0.15 L/min at the maximum, which was superior to the highest level of 6 L/min(POLAR BEAR/USA) currently used in the field. Therefore, it was determined that the performance of the personalized cooling management system applied with the thermal imaging camera proposed in this paper was excellent.

• Journal of Haehwa Medicine
• /
• v.15 no.1
• /
• pp.59-69
• /
• 2006

Objectives & Methods : I investigated 45 literature of Oriental and Western medicine about the treatment of pain in shoulder and arm. Result and Conclusion : 1. The etiological causes of Pain in Shoulder and Arm based on literatures of Oriental medicine are attack of wind-heat on the lung, wind cold, damp-heat struggle between the vital energy and pathogenic factor and six pathogenic factors. And all these causes are the conception of blockage syndrome, Qi and blood stagnating in meridian system. 2. The treatment of Pain in Shoulder and Arm based on Oriental medicine is mainly composed of both medical therapy for Bi syndrome due to pathogenic wind, deficiency of both Qi and blood, consumption of the liver and the spleen, and also acupuncture and moxibustion treatment by selection for acupoint. And those treatments are for treating etiology. And also there are treatments using the meridian system and Twelve Muscle Region and Ashihyeol for the purpose of treating the symptoms. 3. The etiological causes of Pain in Shoulder and Arm based on literatures of Western medicine are degenerative cut of tendon and nerve symptoms caused by tendonitis, bursitis, calcification, ruptured cervical disc and thoracic outlet syndrome. 4. The treatment of Pain in Shoulder and Arm based on Western medicine is for alleviation of pain, such as giving an anodyne, steroid products, local anesthetic injection and stretching and strengthening the muscles.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.23-23
• /
• 2017

Recent favor on high quality food and concern on food safety have demonstrated the superiority of Hanwoo (Korean native cattle). In general, the price of cow is higher than those of steer and bull, causing cheating issues in the market. Hence, this study is to discriminate genders of Hanwoo with identification of factors which highly influence gender discrimination based on the big-size deboning data. Totally, there were 31 variables in the deboning data, and we divided into them two categories: data obtained before and after deboning. Discriminant function analysis was then applied into the data to determined the accuracy of gender discrimination in Hanwoo. The result showed that Hanwoo could be classified by gender with 99.2% of accuracy when using all 31 variables. In detail, it was possible to identify 93 of 94 bulls (98.9%), 96 of 96 cows (100%) and 74 of 75 steers (98.7%). The most significant variables was chuck, sirloin, armbone shin, plates, retail and cuts percentage, sequentially. With variables obtainable before deboning, accuracies of classification were 91.5% for bulls, 92.7% for cows, and 89.3% for steers. The most significant variables was water, cold carcass weight and back-fat thickness. The discrimination accuracy was higher with data obtainable after deboning: bulls (98.9%), cows (99.0%) and steers (98.7%). In this case, chuck, sirloin and armbone shin were the factors determined the classification ability. This study showed that Hanwoo can be classified based on deboning data with appropriate statistics, further suggesting weight of cut of beef might be the standard for gender classification.

• Journal of muscle and joint health
• /
• v.5 no.2
• /
• pp.265-285
• /
• 1998

This Qualitative nursing research was made with a hermeneutic phenomenological approach to find out the meaning and nature of human's experience. The purpose of the inquiry is to find out the meaning and to understand the nature of Joint pain's experience of women in the island and to apply the result to nursing practice. The study was guided by Shin Kyung Rim's four step that revised van Manen's method for doing research. The method of inquiry included : turning to interesting phenomenon. inquiring and investigating experience as it was lived rather than as conceptualized ; reflecting and analyzing essential themes which characterize phenomenon ; and describing phenomenon through art and literature. Multiple strategies for data collecting were needed : deep face to face interview ; analysis of joint pain of women's writings ; describing and analysis of examples of the phenomenon in art, literature. Through this process essensial them of the experience was emerged : Misery that I would like to cut off my body, Sea wind soaking deeply into the bones, Dull pain from the postpartum cold wind, The another suffer I should endure by myself, Recrudesce despite all the try I have made, Often forgetting the pain of every Joint for hardship of life. Findings from artistic and creative inquiry further was validated and meaning was discovered. The study illuminated meaning and simultaneously validated the phenomenological research process. Essential themes for understanding women joint pain's experience, implications, for education, research and practice, direction and need for continuing inquiry were identified.

• Journal of the Korean Society of Costume
• /
• v.63 no.3
• /
• pp.1-16
• /
• 2013

Xiognu people were the first of the Central-Asian nomads to establish a nation in 209 B.C. They always moved around looking for places to breed their animals and fertile grounds, so they wore clothes made of fur and leather and covered their tents with felt from the livestock. This research studies on the literatures, costumes and the achievement of archaeological excavation. Furthermore, to investigate on costumes excavated of Xiongnu, we visited the Mongolian National Museum and the Hermitage Museum. A corn-hat made of felt, a felt hat with ear flaps and a golden crown with a bird on the top were unearthed from a tomb of Xiongnu in Inner mongolia. Women usually wore pigtails, and men wore pigtails or ponytails but they cut their hair short when holding a funeral. Many pigtails discovered in Noyon uul tombs can be considered as their funeral customs. The Xiongnu wore a round or v-neck caftan attached straight sleeves reaching knees in the left folded style, and because they always rode horses, having the length of the caftan not go past their buttocks would have made it more convenient for them. During the period of Western Han, Ho refered to Xiongnu and it became a common name for northern races. They used leather belts and an animal-designed buckle was found. Women commonly rouged their cheeks for a vivid and cute look, and many ornaments were excavated including bracelets, rings and decorations made of gold, silver, copper and jade, among which there were hair ornaments used to identify one's class. A horse pattern with wings and a horn of Golmod T20 was substitution for the Schythian use of deer. Patterns or shape of unearthed articles present in the Xiongnu culture in Noyon uul had a close relationship with Altaic, Greek and Persian cultures. The Xiongnu clothing was made of animals' skin and fur, woolen textiles and felt. It was folded to the left for upper garments, and the pants were adjusted using a belt and shoes were made of leather, which was very suitable for protection against the cold and horse riding. Mobility played a significant role in their clothing.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.5
• /
• pp.100-106
• /
• 2004

$NO^3$-N removal was examined from July 2002 to December 2002 of a surface-flow constructed treatment wetland cell, which was a part of a treatment wetland system composed of four wetland cells and one distribution pond. The system was established on rice paddy near the Kohung Estuarine Lake located at the southern part of the Korean Peninsula. The lake and the paddy were formed by a salt marsh reclamation project. Effluent from a secondary-level treatment plant was funneled into the system. The investigated cell was created in June 2002. Its dimensions were 87 m in length and 14 m in width. It had an open water zone at its center, which was equivalent to 10 percent of its total area. Reeds(Phragmites australis) were transplanted from natural wetlands into the cell and their stems were cut at about 40 cm height from their bottom ends. Average 25 $m^3$/day of effluent from the plant was funneled into the cell by gravity flow and average 24.2$m^3$/day of its treated effluent was discharged into the Sinyang Stream flowing into the lake. Its water depth was maintained about 0.2 m and its hydraulic detention time averaged 5.2 days. The average height of the reed stems was 45.2 cm in July 2002 and 80.5 cm in September 2002. The number of stems averaged 40.3 stems/$m^2$ in July 2002 and 74.5 stems/$m^2$ in September 2002. The reeds were established initially well. $NO_3$-N loading rate of influent and effluent averaged 173.7 and $93.5mg/m2{\cdot}day$, respectively. Removal of $NO_3$-N averaged $80.2mg/m2{\cdot}day$ and its removal rate by mass was about 50 %. Considering the initial operation of the cell and the inclusion of the cold months of November and December in the analysis period, the $NO_3$-N removal rate was good.