• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.2
• /
• pp.231-238
• /
• 2008

Quality attributes of fresh-cut sesame leaf (Perilla frutescens var. japonica) as affected by hydrocooling and packing were investigated in terms of weight loss, respiration, vitamin C content, total chlorophyll content, microbial load and sensory properties during storage at 4 and $10^{\circ}C$. Fresh sesame leaf was trimmed and washed with cold water (1, $5^{\circ}C$) as well as tap water ($13^{\circ}C$) for 30 sec 3 times and then packaged in PP (polypropylene) film bag and PETE (polyethylene terephthalate) tray, and stored for 9 days at 4 and $10^{\circ}C$. Weight loss was decreased by washing and packing. Respiration rate was increased slowly over the storage at $4^{\circ}C$. Vitamin C content and total chlorophyll contents of sesame leaf packaged within PETE tray decreased gradually during storage. Hydrocooling and packing within PETE tray treatments resulted in approximately $1{\sim}2\;log\;CFU/g$ reduction of microbial load.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2008

Quality attributes of fresh-cut pak-choi (Brassica campestris var. chinensis) as affected by hydrocooling and packing were investigated in terms of weight loss, respiration, vitamin C content, total chlorophyll content, microbial load and sensory properties during storage at 4 and $10^{\circ}C$. Fresh pak-choi was trimmed and washed with cold water $(1^{\circ}C)$ as well as tap water $(6^{\circ}C)$ for 30 sec 3 times and then packaged in PP (polypropylene) film bag and PETE (polyethylene terephthalate) bay, and stored for 9 days at 4 and $10^{\circ}C$. Weight loss was decreased by washing and packing generally. Respiration rate was increased slowly over the storage at $4^{\circ}C$. Vitamin C content and total chlorophyll contents of pak-choi packaged within PETE bay decreased gradually during storage. Hydrocooling and packing within PETE bay treatments resulted in approximately 1-2 log CFU/g reduction of microbial load.

• Korean Journal of Food Science and Technology
• /
• v.40 no.2
• /
• pp.171-177
• /
• 2008

The effects of hydrocooling and packaging type on the quality attributes of fresh-cut crown daisies (Chrysanthemum coronarium var. spatiosum) were investigated by examining weight loss, respiration, vitamin C content, total chlorophyll content, microbial load, and sensory properties during storage at 4 and 10$^{\circ}C$. Fresh crown daisies were trimmed and washed with cold water (1 and 5$^{\circ}C$) as well as tap water (10$^{\circ}C$) 3 times each for 30 sec. They were then packaged in PP (polypropylene) film bags or PETE (polyethylene terephthalate) trays, and stored for 9 days at 4 and 10$^{\circ}C$, respectively. In general, weight loss was reduced as a result of the washing and packaging. The respiration rate increased slowly during storage at 4$^{\circ}C$, and the vitamin C and total chlorophyll contents of the crown daisies packaged in PETE trays decreased gradually during storage. Finally, the treatments consisting of hydrocooling and then packaging in PETE trays resulted in approximately 1-2 log CFU/g reductions in microbial load.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.5
• /
• pp.503-513
• /
• 2006

Statement of the problem: The cold-cured resins used in fabrication of the provisional crown and fixed partial dentures could cause pulpal damage by heat generated during exothermic polymerization reactions. Purpose: In this in vitro study investigates the how external conditions such as material of the matrix, thickness of the matrix and thickness of dentin affect the temperature of the tooth during polymerization reaction of the cold-cured resins. Material and methods : To measure the temperature of the resin, metal die was maintained to the temperature of $37^{\circ}C$ with water bath to simulate the temperature of thetooth and thermocouple was placed in the center of the metal die. Acrylic pipe was cut in height of 1, 2, 3, 6, 10 mm and placed on the metal die and mixed resin was pored in the acrylic pipe As the resin polymerized temperature was recorded with the thermometer. Temperature of the resin using matrix was recorded by using the individual tray relieved in different thickness 2, 5, 7, 10 mm. The material of the matrix was irreversible hydrocolloid impression material, vinyl polysilloxane impression material and vacuum-formed template Temperature rise of the resin using different thickness of tooth section was record ed by placing tooth section on the metal die and placing resin over the tooth section. Results : Conclusion : 1. Temperature rise increased as the thickness of the resin increased but there was no significant differences over 3 mm thickness of the resin. 2. The lowest temperature rise was showed in irreversible hydrocolloid impression material and vinyl polysilloxane impression material vacuum-formed template as in orders. 3, Temperature rise of the resin decreased regardless of the thickness of the matrix when vinyl polysilloxane impression material was used as the matrix. 4 When irreversible hydrocolloid impression material was used as matrix, the temperature rise of the resin decreased as the thickness of the matrix increased and there was no temperature rise when thickness of the matrix reached 10 mm, 5. The temperature rise of the resin did not decreased when Polypropylene vacuum-formed template was used as the matrix. 6, The temperature of the resin increased as the thickness of the dentin decreased.

• Transactions of Materials Processing
• /
• v.18 no.2
• /
• pp.150-155
• /
• 2009

A shaft for laser printers has to be produced with high dimensional accuracy of a few micrometers. Most companies produce the shaft, therefore, by machining. These days, forging process is tried to be employed in manufacturing the shaft for productivity. In this study, the dimensional inaccuracy of straightness is studied and the underfill is not focused because the shaft shape is simple and the load capacity of press is sufficient. The straightness and concentricity of the shaft is important for the operation of a laser printer. Many design parameters such as preform shapes, tooling dimensions, forging load, and billet geometries may affect on the dimensional accuracy. In the forging process of shafts, a billet which is cut from wires is used. The billet, therefore, may be a little bit curved but not always straight. The elastic recovery is considered to cause the dimensional inaccuracy. Therefore, the effect of the forging load on the elastic recovery and straightness is investigated through the finite element analyses using DEFORM-3D and ABAQUS.

• Advances in materials Research
• /
• v.7 no.1
• /
• pp.17-28
• /
• 2018

Niobium is a candidate base for new alloys devoted to applications at especially elevated temperatures. Elaborating and shaping niobium-based alloys by conventional foundry may lead to mechanically interesting microstructures. In this work a series of charges constituted of pure elements were subjected to high frequency induction melting in cold crucible to try obtaining cast highly refractory Nb-xCr and Nb-xCr-0.4 wt.%Calloys(x=27, 34 and 37 wt.%). Melting and solidification were successfully achieved. The as-cast microstructures of the obtained alloys were characterized by electron microscopy and X-ray diffraction and their hardness were specified by Vickers macro-indentation. The obtained as-cast microstructures are composed of a body centered cubic (bcc) niobium dendritic matrix and of an interdendritic eutectic compound involving the bcc Nb phase and a $NbCr_2$ Laves phase. The obtained alloys are hard to cut and particularly brittle at room temperature. Hardness is of a high level (higher than 600Hv) and is directly driven by the chromium content or the amount of {bcc Nb - $NbCr_2$} eutectic compound. Adding 0.4 wt.% of carbon did not lead to carbides but tends to increase hardness.

• Agricultural and Biosystems Engineering
• /
• v.5 no.2
• /
• pp.40-44
• /
• 2004

This study was conducted to solve the problem of spinach harvesting done by manpower at the outdoor field during the cold winter season. Prototype spinach harvester was designed to dig, pick-up, and collect in a continuous operation for harvesting outdoor field-planted crawling type spinach. In the field test, two types of blades (Type A : angle of $150^{\circ}$, Type B : straight) were used for measuring the cutting loads of spinach and chain conveyor with lugs was used for picking up the root cut spinach. Prototype's vibrating blade reduced the digging power of the fixed blade by $46\%$. The loss was also very little ($0.7\%$) with a digging depth of 4 cm, an oscillation frequency of 748 rpm, and an oscillation distance of 33 mm. The working performance of the prototype spinach harvester was 38 hour/ha resulting to $96\%$ labor cost reduction compared to the conventional harvesting.

• Journal of the Korea Furniture Society
• /
• v.25 no.3
• /
• pp.223-232
• /
• 2014

To make metalized wood composites of 10 different korean wood species, it was tested by Low temperature melting Bi-Sn alloy injection method at high temperature and high pressure condition. Metalized wood composite of each wood species had light ash color, but still maintained its own natural wood grain and wood figures. It was evaluated on coating properties. Furthermore, it also was check on effect of coating as like a changes of main color, wood grain and wood figures. The results of test were following as; a coating properties as like a cold resistance, heat resistance, acid resistance, alkali resistance, durability of abrasion, and cross-cut test was proper on the conditions of the KS standard. And, In aspect of color changes, the metalized wood composites of 10 different korean wood species had a light ash color, but still maintained its own natural wood grain and wood figures. Also, the more weight per gain of alloy is, the more grey background of metalized wood composite is.

• Design & Manufacturing
• /
• v.10 no.2
• /
• pp.44-49
• /
• 2016

The roll forming produces mass products using the continuous production process. Also we need the process that continuous long material or goods cutting into a desired length. Our study uses 3-D driving cutter and roll forming material as SPCC to investigate this. When we cut the material using the process of roll forming, the shear resistance is raised at the cutting punch's edge. The result is remained the trouble about burr and progressive deformation on the material. This study shows the method minimizing the above trouble. The material of punch was considering heat generated on the continuous production process. So we used the type of STD 61 for the material of punch and had the vacuum heat treatment for the surface hardness of HRC 53. The structure of the mold is designed with forming a double cam die at the upper punch and the both sides of central core. We conducted the experiment three times. In the result when had to make V-groove within the angle between 105 and 110 on the punch front end, we could get the minimum shear resistance on the punch front end. Also with the same condition we minimizes the material jams in the continuous production process.

• Korean Journal of Korean Medical Institute of Dermatology and Aesthetics
• /
• v.1 no.1
• /
• pp.177-197
• /
• 2005

Acute Mastitis(急性乳腺炎=乳癰) is an acute suppurative disease appearing in the breast. It is mostly caused by galactostasis, the stagnation of liver-qi(肝鬱) and stomach-heat(胃熱). It is mostly found in breast feeding women, mostly in primiparae. It usually appears in the third and the fourth weeks of postpartum. At the beginning in the chest there appear induration, distending pain, galactostasis, inversion to cold with fever followed by the enlargement of the masses, burning red, megalgia, not subduing of chills and fever, the accumulation of it to form pus. In the early phase it is advisable to follow the therapeutic principles of soothing the liver and clearing away heat, promoting lactation and subduing swelling. After the formation of pus it is advisable to cut radially and drain the pus. External Therapy(外治法) generally refers to all the methods to treat various diseases and symptoms with application of drugs and manipulation or together with proper instruments on the body surface except the method of taking medicine orally Acute Mastitis has been regarded as surgery or the method of taking medicine orally But, based on many bibliographies, acute mastitis was treated by external therapy. Thus through the historical bibliographic studies of external therapy about acute mastitis, this study was made to help the expanding of the methods of treating acute mastitis.