• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.149-154
• /
• 2007

The zinc prosphate film treatments used to lubricating treatment of mostly cold forging processes. But there are several problems happened to lubricating treatment process such as happening harmful environment on person, complex lubrication processing occurring in energy and time consumption, eco-destructive and chemical by-product generation, the needs of waste disposal etc. As a result, a water-soluble lubricant was developed to replace the perfect or some of the zinc prosphate film in the world. In order to solve these problems, this study evaluated the performance of the typical water-soluble. In this study, for these requirement inquiry of two part. First, about possibility of replace zinc phosphate lubricant, quantitatively evaluation developed of water-soluble lubricant for cold forging vs zinc phosphate lubricant. Second, About optimization of coating Process use to equipment with practicable automatic coating Process. The performance evaluation of these lubricants was conducted using the double cup extrusion test and spike forging test. With the use of the commercial FE code DEFORM, friction factor calibration curves, i.e. cup height ratio vs. punch stroke and spike height vs. punch stroke, were established for different friction factor values. By matching the cup height ratio and the punch stroke and spike height vs. punch stroke from experiment to that obtained from FE simulations, the friction factor of the lubricants was determined. Survey of comparative analysis use to SEM that sprayed lubricant surface structure of grain shape and characteristic of lubricant performance based on grain shape and deformed lubricant surface expansion. As a result, developed lubricant were found to perform comparable to or better than zinc phosphate. And thought this result, innovatively cope with generated problem of existing lubrication process.

• Horticultural Science & Technology
• /
• v.31 no.3
• /
• pp.275-281
• /
• 2013

Low temperature is one of the major environmental factors that affect productivity including reduced growth and budding of vines, and changes of metabolic processes in grape (Vitis spp.). To screen the specific expression of abiotic stress-related genes against cold treatment in 'Kyoho' and 'Campbell Early' grapevines, expression of various defense-related genes was investigated by RT-PCR and real-time PCR. Among the 67 genes analyzed by RT-PCR and real-time PCR, 17 and 16 types of cDNA were up-regulated, while 5 and 6 types were down-regulated in cold-treated 'Kyoho' and 'Campbell Early' grapevines, respectively. Genes encoding carotene (Cart3564 and Cart4472), chalcone isomerase (CHI), cytochrome P450 (CYP), flavonol synthase (FLS), endo-${\beta}$-glucanase precursor (Glu), glutathione peroxidase (GPX), glutathione-S-transferase (GST), leucine-rich repeats (LRR), manganese superoxide dismutase (Mn-SOD), phenylalanine ammonia lyase (PAL), polygalacturonase-inhibiting protein (PGIP), proline rich protein 2 (PRP2), small heat shock protein (sHSP), temperature induced lipocalin (TIL), and thaumatin-like protein (TLP) were up-regulated, while those encoding CBF like transcription factor (CBF1), chitinase-like protein (CLP), cold induced protein (CIP), glycerol-3-phosphate acyltransferase (GPAT), and mitogen-activated protein kinase (MAPK) were down-regulated by low temperature treatment in both in 'Kyoho' and 'Campbell Early'.

• Journal of Pharmacopuncture
• /
• v.8 no.3
• /
• pp.129-135
• /
• 2005

Objective : This study was designed to investigate the effect of bee venom and Scolopendrae Corpus herbal acupuncture on the feeling of cold on legs. Methods : The patient was managed by bee venom and Scolopendrae Corpus herbal acupuncture, body acupuncture and herbal medicine. The following points were selected : BL40, BL57, BL60; SP6. After bee venom and Scolopendrae Corpus herbal acupuncture treatment, body acupuncture was performed at the same points. We evaluated the patient through Visual Analogue Scale(VAS) and Digital Infrared Thermal Imaging(D.I.T.I). Results : After 12 times of treatment, the patient showed that clinical symptoms was decreased, VAS changed from 10 to 3 and there was also improvement change on D.I.T.I.. Conclusions : According to the results, bee venom and Scolopendrae Corpus herbal acupuncture may have the effects on the feeling of cold on legs. But further studies and required to prove the effects of this methods.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.44-54
• /
• 1994

Effects of cooling rate, cold reduction %, continuous annealing treatments on the recrystallization texture structure of the A1 killed extra low carbon steel sheet contaning Ti, Nb, and B were investigated. The texture coefficient ratio TC (222)/TC (200) tends to increase with decreasing the cooling rate of the coling process and increasing cold reduction %. However, the texture coefficient ratio tends to decrease as the cold reduction % increases from 80% to 90%, which may be due to the change of the primary texture structure from {554} (225) to {ill] (1 1%). The optimum fabrication procedures for the steel sheet with a maximum texture coefficient ratio may be : furnance cooling after the coiling treatment, 80% cold reduction and the continuous annealing treatment of holding at 80O0C for 1 min., water quenching and then holding at $450^{\circ}C$ for 5min.

• Herbal Formula Science
• /
• v.28 no.4
• /
• pp.385-406
• /
• 2020

Objectives : To study the use of Cinnamomum cassia among the 394 prescriptions listed in Donguibogam Methods : After selecting a total of 394 prescriptions, 284 prescriptions with Cinnamon Cassia as the protagonist were analyzed and summarized in the table. In particular, the investigation was conducted by comparing the Cinnamomi Ramulus and Cinnamomi Cortex. Results : The Cinnamomum cassia is used in 52 fields of treatment such as common cold & flu diseases, abscess and stroke, etc. Prescriptions containing Cinnamomi Ramulus were most commonly used for cold disease. And prescriptions containing Cinnamomi Cortex were most commonly used for wind diseases. Prescriptions that utilize Cinnamomum cassia are used in the treatment of feeling of cold, numbness, low back pain, cough and so on. Prescriptions containing Cinnamomi Ramulus mainly treat cold disease. And prescriptions containing Cinnamomi Cortex treat mainly abdominal pain and diarrhea. 14 prescriptions of the same name are included with Cinnamomum cassia. The other unclassified Cinnamomum cassia is considered suitable for use with Cinnamomi Cortex. Cinnamomum cassia is only used as a raw material. Conclusions : According to the classification of Cinnamomum cassia, further study of prescription utilization is needed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.1 s.113
• /
• pp.62-69
• /
• 2006

This study was carried out to measure and analyze the storage condition, distribution route, and packaging method of four selected agricultural products(small tomato, cabbage, peach, and carrot) in the cold chain system. It was shown that dew-forming phenomenon by fruits and vegetables deteriorates the agricultural product quality and physical properties of corrugated fiberboard box during the cold chain system. The compressive strength deterioration in corrugated fiberboard boxes was much greater for single wall(SW) corrugated fiberboard containers than for double wall(DW) in low temperature-high humidity condition. To reduce the deterioration of box and dew-forming phenomenon, water-repellency treatment should be over $R_6$. However, water-resistant treatment of corrugated fiberboard containers would be effective under high relative humidity conditions more than 75% RH. It was suggested that functional corrugated fiberboard box packaging would be an optimum method to reduce the deterioration of agricultural products quality by. It was also achieved controlling the relative humidity and temperature during the storage and physical distribution process.

• The Journal of Internal Korean Medicine
• /
• v.25 no.3
• /
• pp.559-568
• /
• 2004

Diagnosis of Raynaud's phenomenon is primarily based on clinical symptoms. Cold stress test(CST) done by DITI(Digital Infrared Thermographic Image) can be helpful for objective diagnosis. The cold stress test was performed three times by DITI; the first after 15 minutes of rest, the second right after one minute of soaking in $20^{\circ}C$ water, the third ten minutes after immersion. For a clear diagnosis, the temperature of the finger tips must be low, or the thermal difference between the metacarpophalangeal joints and the fingertips must be large. Also the evaluation of treatment depends on decrease of thermal gradient between the metacarpophalangeal joints and the finger tips after CST. In oriental medicine Raynaud's phenomenon can be categorized by coldness of the limbs or numbness. Numbness was diagnosed as depression of Ki and Chiljehyangbuhwan(Qizhixiangfuwan) was prescribed. Positive results were observed, not only in follow up CST, but also Visual Analogue Scale after treatment.

• Journal of the Korean Society for Heat Treatment
• /
• v.18 no.1
• /
• pp.18-23
• /
• 2005

Effect of cold rolling on microstructural changes has been investigated for a Zn-15%Al alloy to elucidate the reason for its work softening behavior. Fully annealed microstructure of the Zn-15%Al alloy is characterized by ${\eta}$ grains and (${\eta}+{\alpha}$) lamellar colonies, where ${\eta}$ and ${\alpha}$ are Zn-rich HCP and Al-rich FCC phases, respectively. The hardness decreases continuously with increasing cold rolling degree, exhibiting work softening behavior. It is revealed that during the cold rolling, (${\eta}+{\alpha}$) lamellar colonies gradually change into equiaxed ${\eta}$ and ${\alpha}$ grains due to dynamic recrystallization at room temperature, while pre-existing ${\eta}$ grains are only deformed without recrystallization. Furthermore, cold rolling causes the precipitation of dissolved Al solutes in ${\eta}$ grains. In view of these results, change of (${\eta}+{\alpha}$) phases from lamellar to equiaxed morphology, which results in structural softness and increase in equiaxed ${\eta}/{\alpha}$ grain boundaries with higher mobility, and deterioration of solution hardening by precipitation of Al solutes from ${\eta}$ grains, are thought to contribute to the work softening of Zn-15%Al alloy.

• Fisheries and Aquatic Sciences
• /
• v.13 no.2
• /
• pp.89-95
• /
• 2010

This study was conducted to investigate the efficacy of using a coating of gelatin extracted from refiner discharge to extend the shelf life of salmon during cold storage ($5^{\circ}C$). Relative percentage of moisture loss in gelatin-coated salmon during cold storage was less than that of uncoated salmon. The treatment of salmon with gelatin reduced volatile basic nitrogen (VBN) formation throughout the entire storage period. Measurements of the peroxide value (POV), fatty acid composition, and (20:5n-3+22:6n-3)/16:0 ratio during cold storage indicated that the coating of salmon with gelatin from refiner discharge effectively suppressed lipid oxidation over the entire storage period. The extent of sensory color change during cold storage was less in the gelatin-coated than in the uncoated salmon. From the results of chemical measurements, such as relative moisture content, VBN, POV, fatty acid composition, (20:5n-3+22:6n-3)/16:0 ratio, and sensory color change, the conclusion was made that the coating treatment of salmon with refiner discharge gelatin effectively suppressed moisture loss, lipid oxidation, and color deterioration over the entire storage period.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.5
• /
• pp.270-276
• /
• 2023

In this study, we analyzed two types of cold forging dies commonly used for manufacturing general nuts and screws to investigate the differences in WC powder according to the lifespan. For both Type I and Type II dies, it was observed that as the lifespan of the molds increases, the area fraction of Co becomes larger and the size of the powder becomes smaller. Moreover, there is a trend where the strength also increases as the lifespan gets longer. Actually, the hardness value of the sample with the longest lifespan is ~ 131 HV higher than the specimen of the shortest lifespan, It is noted that the reduction in toughness of the WC-Co mold is caused by insufficient Co and the decrease in contact surface area of WC-Co results in a reduced bonding surface area. The lifespan of cold-working WC molds increases when the W content and the volume fraction of WC are high, and the size of the WC powder is small. The results can significantly enhance producing high-quality molds with an extended lifespan using WC powder for cold forging.