• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.97-100
• /
• 2009

한국형 발사체용 액체로켓엔진을 개발하기 위한 75톤급 연소기 기술검증 시제를 제작하여 수류시험 및 점화시험을 수행하였다. 기존의 연소기에 새롭게 도입된 기술인 점화, 막냉각, 산화제 선공급방식을 반영하기 위해 시험설비를 수정 및 개량하였다. 산화제 및 연료 수류시험을 통해 공급라인, 점화기 라인, 연소기의 수력학적 특성, 추진제 충전시간을 파악하여 점화순서를 결정하였다. 점화 cyclogram을 통해 점화기의 점화시험을 성공적으로 수행하였으며, 향후 연소시험을 위한 기초 자료를 습득하였다.

• 동의생리병리학회지
• /
• 제34권1호
• /
• pp.30-36
• /
• 2020

This study aimed to investigate heart rate variability (HRV) characteristics of cold pattern with repeated measurement data. Participants were taken from a Daejeon University cohort study from 2015 to 2018. Forty-seven of the participants studied displayed cold pattern while 23 showed signs of non-cold pattern. HRV was measured in supine position for 5 minutes at each year, and an 8-item cold pattern questionnaire was used for the diagnosis of cold pattern. SDNN (standard deviation of the NN intervals) and RMSSD (the square root of the mean squared differences of successive NN intervals) were used as time domain analysis, and TP (total power), VLF (power in very low frequency range), LF (power in low frequency range), HF (power in high frequency range), LF norm (LF power in normalized units), HF norm (HF power in normalized units) and LF/HF were used as frequency domain analysis. In the Mann-Whitney U test, LF norm, HF norm, and LF/HF showed differences between the cold pattern group and non-cold pattern group at every measurement, and in the independent t-test, the differences were also observed at three points except for the baseline (2015). In the repeated measures ANOVA, the interaction effects were not observed in all HRV parameters, but the time period effects were observed in SDNN, RMSSD, TP, VLF, LF and HF. There were significant differences between those two groups in LF norm, HF norm and LF/HF. This study suggests that LF norm, HF norm and LF/HF might be a useful indicator of cold pattern properties.

• 에너지공학
• /
• 제24권2호
• /
• pp.144-153
• /
• 2015

저온에서 경유의 파라핀 왁스 생성 및 침전현상은 차량의 저온성능에 악영향을 준다. 본 연구에서는 경유에 바이오디젤, 등유, 저온특성첨가제를 혼합한 연료에 대해 연료조성에 따른 담점, 필터막힘점, 유동점 변화를 분석하였고, 경유의 저온특성에 따른 차량의 저온성능에 대해 평가하였다. 경유는 유동성향상 첨가제(WAFI)와 등유유분의 혼합량이 증가할수록 저온특성이 개선되었으며, 바이오디젤 혼합량이 증가할수록 저온특성이 악화되었다. WAFI는 필터막힘점 개선에, 등유유분은 담점 개선에 효과적이었다. 차량의 저온성능에 대하여 필터막힘점과 유동점의 영향성은 확인하였으나, 담점은 큰 영향이 없었다. 필터막힘점은 차량에 대해 저온에서의 운행가능 한계를 반영하였다.

• 한국작물학회지
• /
• 제49권5호
• /
• pp.373-380
• /
• 2004

The production of sweet (su) and super sweet corns (sh2) has been economically feasible in Korea in recent years. Major factors limiting super sweet corn production are low germination and low seedling vigor. Since seed quality is closely related to seed maturity, the optimum harvest time for the seed production of sweet and super sweet corns was studied and the quality of seeds with varying maturities was investigated in 2001 and 2002 cropping seasons. The parents of the sweet corn seeds were Hybrid Early Sunglow and 'Golden Cross Bantam 70' and those of super sweet corn were Xtrasweet 82 and 'For­tune'. Seeds were harvested at 21, 28, 35, 42, 49, and 56 days after silking (DAS). As the seeds developed, seed weight of sweet corn increased and the seed moisture content decreased faster than that of super sweet corn. Germination rates of sweet corn seeds harvested 21 and 28 DAS at $25^{\circ}C$ and emergence rates in the cold soil test were significantly lower than those of seeds harvested after 42 DAS in both years. Although the germination rates of super sweet corn seeds with varying maturities showed similar patterns as sweet corn seeds at $25^{\circ}C$, the emergence rate of super sweet corn seeds in cold soil test continuously increased with seed maturity. This suggests that seed quality of super sweet corn should be tested in a cold soil test to estimate field emergence. As the seeds developed, leakage of total sugars and electrolytes from the both sweet and super sweet corn seeds decreased up to 42 or 49 DAS. The $\alpha-amylase$ activities of both sweet and super sweet corn seeds increased with seed maturity from 21 to 35 or 49 DAS depending on genotype and year. The optimum harvest time for the seed production of sweet corn was 42 DAS and 49 DAS for super sweet corn considering emergence rate and plumule dry weight in the cold soil test, leakage of sugars and electrolytes from the seeds, and $\alpha-amylase$ activity.

• 한국분말재료학회지
• /
• 제20권4호
• /
• pp.245-252
• /
• 2013

This study attempted to manufacture a Cu-Ga coating layer via the cold spray process and to investigate the applicability of the layer as a sputtering target material. In addition, changes made to the microstructure and properties of the layer due to annealing heat treatment were evaluated, compared, and analyzed. The results showed that coating layers with a thickness of 520 mm could be manufactured via the cold spray process under optimal conditions. With the Cu-Ga coating layer, the ${\alpha}$-Cu and $Cu_3Ga$ were found to exist inside the layer regardless of annealing heat treatment. The microstructure that was minute and inhomogeneous prior to thermal treatment changed to homogeneous and dense with a more clear division of phases. A sputtering test was actually conducted using the sputtering target Cu-Ga coating layer (~2 mm thickness) that was additionally manufactured via the cold-spray coating process. Consequently, this test result confirmed that the cold sprayed Cu-Ga coating layer may be applied as a sputtering target material.

• 사상체질의학회지
• /
• 제21권3호
• /
• pp.216-222
• /
• 2009

1. Objectives: This case study described a process of the patient diagnosed as acute hepatitis A treated by medication based on the Sasang Constitutional Medicine and acupuctural theraphy and obtained improved effects about several symptoms. 2. Methods: We diagnosed the male patient with acute hepatitis A as Tae-Eumin Exterior-Cold-Disease by the Cold in the Esophagus, and administered Mahwangbalpyo-tang and Handayeolso-tang according to clinical progress. And we evaluated the results by liver function test(LFT; AST, ALT, $\gamma$-GTP ), total bilirubin level and the visual analog scale(VAS) of symptoms. 3. Results and Conclusion: Almost symptoms (except for jaundice) at the time of admission were disappeared, and also jaundice (estimated by color of scleras and color of urine) was alleviated. Also level of AST, ALT, $\gamma$-GTP and total bilirubin decreased in laboratory test. We obtained positive effects to the therapy but we considered necessities of further comparative studies with control group.

• 한국강구조학회 논문집
• /
• 제23권4호
• /
• pp.483-491
• /
• 2011

본 연구에서는 구조용강재의 샤르피 충격시험(Charpy Impact Test)을 통해 저온에서의 충격 인성(Impact Toughness) 평가를 실시하여 사용 가능 온도를 파악함으로써 강재의 극한지 적용성을 검토하였다. 본 시험에 사용된 강재는 용접구조용강 중 현재 가장 널리 쓰이는 강종인 SM490B와 TMCP (Thermo-Mechanical Control Process)법에 의해 제조된 고강도 강재인 SM570-TMC이다. 또한, 본 시험결과와의 비교를 위해 남극 세종기지 건설시 사용실적이 있는 일반구조용강인 SS400에 대해서도 시험을 수행하였다. 대부분의 강구조물은 용접에 의해 제작되므로, 강재의 극한지 적용성 검토를 위해 용접시험판을 제작하여 모재(Base Metal), 용접금속(Weld Metal) 및 열양향부(Heat Affected Zone)에 대해서 충격시험을 실시하였다. 단, SS400의 경우에는 용접구조용강재가 아니므로 모재에 대해서 충격시험을 실시하였다. 대상 강재의 샤르피 충격시험을 통해서 저온에서의 충격흡수에너지 값을 구하고 이를 강재의 항복응력에 따른 충격흡수에너지의 기준값과 비교함으로써 강재의 사용온도를 결정하였으며, 이를 통해서 구조용강재의 극한지 적용성을 검토하였다.

• Journal of Oral Medicine and Pain
• /
• 제36권4호
• /
• pp.215-224
• /
• 2011

본 연구의 목적은 과민치아에 904 nm GaAs 다이오드 레이저를 조사하여 치료효과를 연구하여 과민 치아의 치료에 이러한 저수준 레이저 요법을 임상적으로 사용할 수 있는지 가능성을 파악하는 데 있다. 단국대학교 치과대학 부속치과병원 안면 동통 구강내과에 내원한 환자를 대상으로 하였으며, 각 환자는 치경부에 사아질이 노출된 치아가 적어도 좌우로 2개 이상의 짝이 되는 치아를 소유하였다. 본 연구에 사용된 치아는 모두 50 개로써 실험군 25개, 대조군 25 이었다. Tactile test, cold(ice stick) test, electrical pulp test 를 실험전, 실험 1주후, 2주후, 3주후, 4주후 모두 5회 시행하였다. 레이저조사는 첫방문시, 1주후, 2주후, 3주후 등 4회하되 모두 세가지 검사를 마친 후 시행하였다. 전기치수 검사 외 Tactile test와 cold test는 주관적 평가인 visual analogue scale을 사용하였다. 실험 결과, Tactile test에서 VAS 수치는 시간 경과에 따라 유의하게 감소하였으나 실험군과 대조군간에는 유의한 차이가 없었다. 전기치수 검사에서는 실험군의 과민도가 대조군에 비해 유의하게 높았으나 (높은 역치를 의미) 시간 경과시 유의한 변화는 볼 수 없었다. 온도 (cold) 검사에서는 레이저 조사후 실험군과 대조군 간의 차이뿐 만 아니라 시간 경과 시에도 유의하게 감소하였다. 이러한 결과를 보아 904 nm GaAs 레이저는 과민치아의 치료에 비가역적인 방법으로서 효과적으로 사용할 수 있으리라 사료된다.

• 대한기계학회논문집A
• /
• 제21권7호
• /
• pp.1081-1088
• /
• 1997

The purpose of this work is to investigate the working limit of carbon steel and forging condition of cold forging. The fracture criteria which was proposed by Oyane and Osakada was used. Compression test, hardness study and tension test by Oyane's creteria, microstructure study by Osakada's were carried out. The results were compared with each other. It was found that working limit on compressive hydrostatic stress is increased in comparison with that of tensile stress field and can be forecasted the fracture limit of closed cold forging.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.953-958
• /
• 2001

The concrete which has placed under cold weather has some defects such as the decrease of initial strength by hydration delay, strength unrecover at unhardened concrete freezing and structural failure and crack by expansion pressure. So, in this study, we tried to develope the concrete which can be made under cold weather without defect by using of do-icing agency In concrete test, the used do-icing agency has the characteristics of de-icing and rapid hydration. By test results, Co{$NH_{2}$$]_{2}$is unsuitable for workability, and NaN$O_{2}$ is the most suitable agency for cold weather. And for curing, the cured concrete at $21^{\circ}C$ for 24 hours has the safe strength.