• 소성∙가공
• /
• 제29권4호
• /
• pp.194-202
• /
• 2020

In this paper, experimental and numerical study on a combined sheet metal forming and plate forging of a seal part of a passenger car's hub bearing is conducted to develop the new process of which target is to remove machining process by plate forging and to achieve near-net shape manufacturing. The previous process of a sheet metal forming inevitably needed a machining process for making stepped sheet after conventional sheet metal forming in a progressive way. The stepped sheet is intended to be formed by plate forging in this study. Through the systematic way of developing the combined forming process using solid elements based-elastoplastic finite element method (FEM), several conceptual designs are made and an optimized process design in terms of geometric dimensioning and tolerance of straightness of the thin part is found, which is exposed to bending in metal forming of axisymmetric part. The predicted straightness measured by the slope angle of the tilted thin region is compared with the experimental straightness, showing that they are in a good agreement with each other. Through this study, a systematic approach to optimal process design, based on elastoplastic FEM with solid elements, is established, which will contribute to innovating the conventional small-scaled sheet metal forming processes which can be dealt with by solid elements.

• Journal of Preventive Medicine and Public Health
• /
• 제35권1호
• /
• pp.33-40
• /
• 2002

Objective : From an analysis of a community outbreak of measles in Youngju, Gyeongbuk, in March 2000, the authors evaluated the effectiveness of the measles vaccination and its determinants to Provide an epidemiologic basis for the establishment of a vaccination policy. Methods : Information was collected regarding the vaccinations from the health records of four primary schools and through a questionnaire surrey of the parents of students in two middle and two high schools (N=4638). Measles cases were surveyed from the patient list of each school and from case reports in the public health center. The attack rate and vaccine effectiveness of measles was evaluated by school; grade; frequency, region, and institution of vaccination. Results : The attack rate cf measles, 6.3% among the total subjects, was higher in middle school students (15.8%) than in primary (2.0%, p<0.05) and high school students (8.9%, p<0.05). The attack rate of the unvaccinated group was 4.6-fold higher than the vaccinated group in primary schools (p<0.05). Vaccine effectiveness was 83.2% among lower graders of primary schools, 34.0% among higher graders of primary schools,26.1% in middle schools, and -7.0% in high schools. In multiple logistic regression analysis, grade in school (odds ratio, 0.77; 95% CI=0.67-0.87) and frequency of vaccination (odds ratio, 0.57: 95% CI=0.37-0.58) were significant predictors of the outcome. Conclusions : We concluded that the explosive outbreak of measles in this area resulted from both inadequate vaccination coverage and secondary failure of vaccination. There was no evidence of any effect of the cold chain system on the vaccine failure.

• Journal of Plant Biotechnology
• /
• 제39권3호
• /
• pp.212-218
• /
• 2012

Glycosyltransferases are enzymes (EC 2.4) that catalyze the transfer of monosaccharide moieties from activated nucleotide sugar to a glycosyl acceptor molecule which can be a carbohydrate, glycoside, oligosaccharide, or a polysaccharide. In this study, a UDP-glucosyltransferase cDNA was isolated from Brassica rapa using a rapid amplification of cDNA ends (RACE) and subsequently named BrUGT. It has a full-length cDNA of 1,236 bp with 119 bp 5'-untranslated region (UTR), a complete ORF of 834 bp encoding a polypeptide of 277 amino acids (31.19 kDa) and a 3'-UTR of 283 bp. BLASTX analysis hits a catalytic domain of Glycos_transf_1 super family (cl12012) that belongs to the Glycosyltransferases group 1 with tetratricopeptide (TPR) regions located between 165 to 350 bp. Expression analysis showed high mRNA transcripts in pistil, followed by petal, seed and calyx of flower. Moreover, expression analysis of BrUGT in Chinese cabbage seedlings under stresses of cold, salt, PEG, $H_2O_2$, drought and ABA showed elevated mRNA transcript. Furthermore, when BrUGT gene was transformed into rice using pUbi-1 promoter, overexpression was evident among the $T_1$ plants. This study provides insights into the function of BrUGT in plants.

• 한국환경복원기술학회지
• /
• 제18권4호
• /
• pp.15-27
• /
• 2015

The objectives of this study are to analyze the quantitative ecological principal components of Korean Peninsula using the multivariate spatial environmental datasets and to compare the ecological difference between South and North Korea. Ecological maps with GIS(Geographical Information System) are constructed by PCA(Principal Component Analysis) based on seventeen raster(cell based) variables at 1km resolution. Ecological differences between South and North Korea are extracted by Factor Analysis using ecosystem maps masked from Korean ones. Spatial data include SRTM(Shuttle Radar Topography Mission), Temperature, Precipitation, SWC(Soil Water Content), fPAR(Fraction of Photosynthetically Active Radiation) representing for a productivity, and SR(Solar Radiation), which all cover Korean peninsula. When it performed PCA, the first three scores were assigned to red, green, and blue color. This color triplet indicates the relative mixture of the seventeen environmental conditions inside each ecological region. The first red one represents for 'physiographic conditions' worked by high elevation and solar radiation and low temperature. The second green one stands for 'seasonality' caused by seasonal variations of temperature, precipitation, and productivity. The third blue one means 'wetness condition' worked by high value such as precipitation and soil water contents. FA extraction shows that South Korea has relatively warm and humid ecosystem affected by high temperature, precipitation, and soil water contents whereas North Korea has relatively cold and dry ecosystem due to the high elevation, low temperature and precipitation. Results would be useful at environmental planning on inaccessible land of North Korea.

• 한국수소및신에너지학회논문집
• /
• 제19권5호
• /
• pp.403-409
• /
• 2008

Polymer electrolyte membrane fuel cell (PEMFC) is very interesting power source due to high power density, simple construction and operation at low temperature. But it has problems such as high cost, improvement of performance, effect of temperature and initial start at low temperature. These problems can be approached to be solved by using experiment and mathematical method which are general principles for analysis and optimization of control system for heat and hydrogen detecting management. In this paper, insulation vessel and control system for stable operation of fuel cell at low temperature were developed for experiment. The constant temperature capability and the heating time at sub-zero temperatures with insulation control system were studied by using a heating bar of 60W class. PEMFC stack which was made by 4 cells with $50\;mc^2$ active area in each cell is a thermal source. Times which take to reach constant temperature by the state of insulation vacuum were measured at variable environment temperatures. The test was performed at two conditions: heating mode and cooling mode. Constant temperature capability was better at lower environment temperature and vacuum pressure. The results of this experiment could be used as basis data about stable operation of fuel cell stack in low temperature zone.

• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.941-951
• /
• 2016

The aim of this work is to simulate the thermohydraulic consequences of a main steam line break and to compare the obtained results with Rossendorf Coolant Mixing Model (ROCOM) 1.1 experimental results. The objective is to utilize data from steady-state mixing experiments and computational fluid dynamics (CFD) calculations to determine the flow distribution and the effect of thermal mixing phenomena in the primary loops for the improvement of normal operation conditions and structural integrity assessment of pressurized water reactors. The numerical model of ROCOM was developed using the FLUENT code. The positions of the inlet and outlet boundary conditions and the distribution of detailed velocity/turbulence parameters were determined by preliminary calculations. The temperature fields of transient calculation were averaged in time and compared with time-averaged experimental data. The perforated barrel under the core inlet homogenizes the flow, and therefore, a uniform temperature distribution is formed in the pressure vessel bottom. The calculated and measured values of lowest temperature were equal. The inlet temperature is an essential parameter for safety assessment. The calculation predicts precisely the experimental results at the core inlet central region. CFD results showed a good agreement (both qualitatively and quantitatively) with experimental results.

• 대기
• /
• 제29권5호
• /
• pp.585-597
• /
• 2019

This study evaluates the performance of Weather Research and Forecasting (WRF) model in simulating temperature over the COordinated Regional climate Downscaling EXperiment-East Asia (CORDEX-EA) Phase 2 domain for the reference period (1981~2005), and assesses the changes in temperature and its extremes in the mid-21st century (2026~2050) under global warming based on Representative Concentration Pathway (RCP) scenarios. MPI-ESM-LR forced by two RCP scenarios (RCP2.6 and RCP8.5) is used as initial and lateral boundary conditions. Overall, WRF can capture the observed features of temperature distribution reflecting local topographic characteristic, despite some disagreement between the observed and simulated patterns. Basically, WRF shows a systematic cold bias in daily mean, minimum and maximum temperature over the entire domain. According to the future projections, summer and winter mean temperatures over East Asia will significantly increase in the mid-21st century. The mean temperature rise is expected to be greater in winter than in summer. In accordance with these results, summer (winter) is projected to begin earlier (later) in the future compared to the historical period. Furthermore, a rise in extreme temperatures shows a tendency to be greater in the future. The averages of daily minimum and maximum temperatures above 90 percentiles are likely to be intensified in the high-latitude, while hot days and hot nights tend to be more frequent in the low-latitude in the mid-21st century. Especially, East Asia would be suffered from strong increases in nocturnal temperature under future global warming.

• Environmental Engineering Research
• /
• 제24권4호
• /
• pp.690-698
• /
• 2019

Air pollution has attracted ever-increasing attention because of its substantial influence on air quality and human health. To better understand the characteristics of long-range transported pollution, the single particle chemical composition and size were investigated by the single particle aerosol mass spectrometry in Fuzhou, China from 17th to 22nd January, 2016. The results showed that the haze was mainly caused by the transport of cold air mass under higher wind speed (10 m·s^-1) from the Yangtze River Delta region to Fuzhou. The number concentration elevated from 1,000 to 4,500 #·h^-1, and the composition of mobile source and secondary aerosol increased from 24.3% to 30.9% and from 16.0% to 22.5%, respectively. Then, the haze was eliminated by the clean air mass from the sea as indicated by a sharp decrease of particle number concentration from 4,500 to 1,000 #·h^-1. The composition of secondary aerosol and mobile sources decreased from 29.3% to 23.5% and from 30.9% to 23.1%, respectively. The particles with the size ranging from 0.5 to 1.5 ㎛ were mainly in the accumulation mode. The stationary source, mobile source, and secondary aerosol contributed to over 70% of the potential sources. These results will help to understand the physical and chemical characteristics of long- range transported pollutants.

• 지구물리
• /
• 제8권4호
• /
• pp.173-185
• /
• 2005

This study examines the relationships among sea ice concentration, surface air temperature, surface wind, and SST (Sea Surface Temperature) in Bransfield Strait to understand the climatic characteristics and its related sedimentary process there. In analyses of the monthly data, during the austral autumn (Mar., Apr., and May), the frequency of southeasterlies is correlated positively with the sea ice concentration and negatively with the surface air temperature, whereas that of northwesterlies is reverse. These relationships are explained by the process that the southeasterlies of the cold air from the Antarctic Continent affect the ocean current around Bransfield Strait. And then the ocean current makes the sea ice generated in the Weddell Sea drift into the strait. During the spring (Sep., Oct., and Nov.), sea ice concentration and surface air perature are closely correlated with the frequency of northwesterlies with warm air mass. In the some parts of the northern boundary region, the sea ice concentration in Bransfield Strait is positively correlated with the SST during the autumn and spring. Such relationship may rather propel the sea ice melting in proportion to the sea ice concentration during the autumn.

• 한국식품저장유통학회지
• /
• 제14권5호
• /
• pp.457-461
• /
• 2007

영주산 '후지' 사과의 전처리 및 포장방법별 저장기간 동안 품질변호를 알아보기 위하여 사과를 5% $CaCl_2$ 용액에 15분 동안 침지한 후 완전히 건조시켜 $25\;{\mu}m$ 두께의 LDPE 필름으로 박스단위로 포장하여 $0^{\circ}C$의 농협 현지저온저장고에서 21주간 중량감소율, 경도, 적정산도, 가용성 고형분함량, 비타민 C함량, 부패율 조사하였다. 중량감모율, 경도변화, Vitamin C 변화, 부패율 등에서 칼슘처리과 필름포장을 병행한 처리구(Ca-MA)가 다른 처리구에 비해 저장 중 품질변화가 가정 적은 것으로 나타나 영주산 '후지' 사과 저장시 선도유지에 효과적인 것으로 사료된다.