• 한국강구조학회 논문집
• /
• 제17권5호통권78호
• /
• pp.561-568
• /
• 2005

본 논문의 목적은 트러스 인장웨브재의 형상이 정방형 각형강관인 기존 연구(강관웨브형)와 고장력 강봉을 인장웨브재로 사용하기 위해 연결플레이트를 가지는(강봉웨브형) 냉간성형 각형강관 갭 K형 접합부의 거동 비교를 통하여 고장력 강봉 사용의 적정성을 알아보기 위한 것이다. 주관폭두께비가 33.3으로 동일한 강관웨브형 실험체 4개와 강봉웨브형 실험체 8개의 최대내력, 파괴모드, 초기강성, 연성율 등을 비교하였다. 비교 결과, 접합부의 내력은 강관웨브형에서는 압축지관의 선행파괴로 결정되었으며, 강봉웨브형에서는 인장측의 선행파괴로 결정되었다. 무차원화 내력은 동일 폭비에서 강관웨브형이 높게 나타났으며, 폭비 증가에 따른 내력증가현상도 강관웨브형에서 뚜렷하게 나타나고, 강봉웨브형은 일정한 경향이 나타나지 않은 반면에 인장과 압축폭비로 나누어 살펴보면 인장폭비 증가에 따라서는 선형적인 증가현상이 나타남을 알았다. 파괴모드는 강관웨브형의 경우에는 압축지관의 미소 국부좌굴과 인장웨브와 주관 접합면의 소성파괴가 나타났고, 강봉웨브형의 경우는 주관플랜지면 소성변형 후 연결플레이트 용접부위의 파단이 나타났다. 따라서, 강봉웨브형에서 연결 플레이트를 갖는 갭K형 접합부의 경우에는 강관웨브형에 비해 주관의 폭두께비를 낮게 할 필요가 있으며, 폭비도 인장지관과 압축지관과의 관계를 고려하여 결정하여야 할 것으로 판단된다.

• Strategy21
• /
• 통권46호
• /
• pp.89-122
• /
• 2020

The longing for submarine manufacture and the fear of her power had exited for a long time, but submarine that could submerge and attack was built from 20th century by science technology development. The question, 'Submarine can exercise her power in naval warfare?' had exited before World War I, but the effective value of submarine was shown in the procedure of a chain of naval warfare during World War I and World War II. Germany and the United States made the best use of submarines at that time. The submarines of these nations mounted fierce attack on the enemy's battleships and merchant ships and blocked the sea lanes for war material. These fierce attack on ships became impossible After World War II, and the major powers reduced and coordinated the defence budget, so they considered the role of submarine. However, submarine is still powerful weapon system because she can secretly navigate under the water, and one of the most important force in the navy. The aim of this thesis is analyzing submarine roles in each naval warfare and integrating maritime strategy and weapon system technology into her roles. First, the research about represent submarine roles like anti-surfaceship warfare, anti-submarine warfare, intelligence gathering, land attack, supporting special operation and mine landing warfare will be presented, then the major naval warfare where submarine participated(during ex-World War I, World War I, World War II, The Cold War Era and post Cold War) and the analyzing of submarine roles by time will be presented. Submarine was developed for anti-surfaceship warfare during ex-World War I but could not make remarkable military gain in naval warfare because her performance and weapon was inadequate. However, the effective value of submarine in the procedure of a chain of naval warfare was shown during World War I and World War II. The major powers put battleships into naval warfare undiscriminatingly to command the sea power and submarines did massive damage to enemy navy power, so put a restraint the maritime power of enemy, and blocked the sea lanes for war material. After World War II, the battlefield situation changed rapidly and the concept of preemption became difficult to apply in naval warfare. Therefore, the submarine was unable to concentrate on anti-surfaceship mission. Especially during the Cold War era, nuclear submarine came to appear and her weapon system developed rapidly. These development gave submarines special missions: anti-submarine warfare and intelligence gathering. At that time, United States and Soviet submarines tracked other nation's submarines loaded with nuclear weapons and departing from naval their base. The submarines also collected information on the volume of ships and a coastal missile launching site in company with this mission. After Cold War, the major powers despatched forces to major troubled regions to maintain world peace, their submarines approached the shores of these regions and attacked key enemy installations with cruise missiles. At that time, the United States eased the concept of preemption and made the concept of Bush doctrine because of possible 911 terrorism. The missiles fired from submarines and surface battleships accurately attacked key enemy installations. Many nations be strategically successful depending on what kind of mission a submarine is assigned. The patterns of future naval warfare that my country will provide against will be military power projection and coalition/joint operations. These suggest much more about what future missions we should assign to submarines.

• 한국항공우주학회지
• /
• 제38권2호
• /
• pp.119-128
• /
• 2010

본 논문에서는 다양한 방법으로 제작된 복합재 접착 체결부의 강도에 대한 온도 및 습도 환경의 영향을 연구하였다. 시편은 두 가지 종류의 일체성형 방법 외에 동시접착 및 이차접착 등 총 네 가지 방법으로 제작하였고, 상온건조, 고온습도 및 저온건조 환경 등 세 가지 환경에서 강도시험을 수행하였다. 전체적으로 고온습도 환경에서의 파손강도가 상온 환경에 비해 11~23% 가량 높게 나타났고, 저온 환경에서의 파손강도는 동시접착 체결부를 제외하고는 8~21% 가량 상온 강도보다 낮게 나타났다. 시험 환경에 따른 체결부의 강도 차이는 환경에 따른 접착제의 물성 변화가 주 원인인 것으로 분석되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1115-1120
• /
• 2003

The recent tendency in the automobile industries is toward light weighting vehicle body to improve the problems by environmental pollution as well as improving fuel cost. The effective way to reduce the weight of vehicle body seems to be application of new materials for body structure and such trend is remarkable. Among the various materials for vehicle body, stainless steel sheet (for example, 301L and 304L), TRIP steel and cold rolled steel sheets are under the interests. However, in order to guarantee reliability of new material and to establish the long life design criteria of body structure, it is important and require condition to assess spot weldability of them and fatigue strength of spot welded lap joints which were fabricated under optimized spot welding condition. And, recently, a new issue in the design of the spot welded structure is to predict economically fatigue design criterion without additional fatigue tests. In general, for fatigue design of the spot-welded thin sheet structure, additional fatigue tests according to the welding condition, material, joint type, and fatigue loading condition are generally required. This indicates that much cost and time for it should be consumed. Therefore, in this paper, the maximum stresses at nugget edge of spot weld were calculated through nonlinear finite element analysis first. And next, obtained the ${\Delta}P-N_{f}$ relation through the actual fatigue tests on spot welded lap joints of similar and dissimilar high strength steel sheets. And then, the ${\Delta}P-N_{f}$ relation was rearranged in the ${\Delta}{\sigma}-N_{f}$ relation. From this ${\Delta}{\sigma}-N_{f}$ relation, developed the fatigue design technology for spot welded lap joints of them welded using the optimized welding conditions.

• 근관절건강학회지
• /
• 제10권1호
• /
• pp.19-31
• /
• 2003

Purpose : The purpose of this study was to examine the effect of the self- efficacy, group cohesion and family support on adherence of aquatic exercise in arthritis patients. Method : The Subjects were 30 patients with arthritis who had participated in the 6-week aquatic exercise programs of Korean Rheumatology Health Professionals Society. All subjects were interviewed from November to December, 2001(1st) and Feburary, 2002(2nd) using a structured questionnaire which was composed of 42 items. SPSS Win 10.0 was used for data analysis. Results : Ten out of thirty were adherer who were keeping aquatic exercise for three months since they completed 6-week aquatic exercise program. The major reasons of adherence were affectional reasons and general condition improvement on the first month. The reasons of 3-month adherence were improvement of arthritis symptoms, affectional improvement, expectations, general condition improvement and group activity. The major reasons of drop out were environment factors and physical factors. The environmental reason were time shortage, economic problem and long distance. And the physical factor were cold, pain and other health problem. The scores of self-efficacy were decreased from 528.00 to 476.00 within 3 months after compeleting aquatic exercise program and that was statistically significant(p=.029). But there were no statistically differences in group cohesion and family support. There was a significant positive correlation between exercise adherence and self-efficacy. Factors influencing the exercise adherence was self-efficacy which accounted for 23% of the variance in the exercise adherence. Conclusion : In conclusion, self-efficacy is a significant variable in the exercise adherence and changes within 3 month after completing aquatic exercise program. The results of this study suggested that the strategy for maintaining self-efficacy should be developed.

• 한국산학기술학회논문지
• /
• 제1권1호
• /
• pp.23-26
• /
• 2000

스폿용접은 겹침판을 끼우고 가압상태의 전극 사이에 단시간의 대전류를 흘려, 전류가 집중하는 전극 직하의 모재 저항발열과 전극 및 모재의 열전도를 이용해서 판과 판의 접촉부에 안정한 용융부를 형성하는 압접법이다. 스폿용접으로 대표되는 저항용접법의 특징은 작업속도가 빠르고. 대량 생산적인 성격이 강하다는 점이다. 그러나, 용접부의 점검이 중요함에도 불구하고 용접부의 직접 감시가 곤란하여 적절한 검사 방법이 확립되지 않은 결점이 있다. 최근 제조공정 중에 실시간으로 스폿 용접부를 비파괴적인 방법을 이용하여 응력 및 변형상태를 체크하고. 결합을 검출할 수 있는 방법이 강력히 요구되고 있는 실정이다. 스폿 용접부페 광학적으로 레이저 빔을 조사하여 렌즈에 의해 결상되면 결상면상에 작은 입자모양의 반점이 생긴다. 이 반점을 스페클이라 하며 이 스페클에 의해 만들어진 불규칙한 반점모양을 스페클 패턴이라 한다. 이러한 현상은 레이저 빔이 가간섭의 성질을 지니고 있으므로 조사영역에서는 랜덤하지만 시간적으로 정상적인 위상관계에 있는 다수의 광파가 간섭함으로서 발생하는데 이와 같은 줄무늬 간격을 PC 프로그램으로 계산하여 응력을 측정한다. 따라서 본 연구에서는 레이저를 이용한 전자처리식 스페클 패턴 간섭법(ESPI)으로 스폿 용접부의 응력 및 변형률을 측정하여 스트레인 게이지법과 비교 고찰한 결과, ESPI법이 유용함을 알 수 있었으며. 이 방법을 생산 공정에 적용함으로서 생산성 및 품질 향상을 기할 수 있다고 판단된다.

• 수산해양기술연구
• /
• 제57권3호
• /
• pp.194-204
• /
• 2021

The research was analyzed the catch data of the five years (2016-2020) for six joint venture company tuna purse seiners in the Atlantic Ocean, with the aim of suggesting improvement measures for responsible and sustainable fishing according to changes of recommendation by International Commission for the Conservation of Atlantic Tuna (ICCAT) on the tropical tunas. In the last five years, the average catch of six tuna purse seiner gradually increased to 7,745 tons, 8,364 tons and 9,053 tons from 2016 to 2018, but decreased to 7,761 tons in 2019 and 6,214 tons in 2020. The reason for the decrease in fishing volume in 2019 and 2020 was the fluctuation of the formation of the cold water zone (22-23℃), and the total ICCAT convention area of FAD closure in January and February due to the expansion of the FAD closure area and poor free school catching during two months period, respectively. The analysis on fishing area showed that the percentage of fishing in the high sea was about 85% although the FAD closure area included the EEZ zone in coastal countries; the rise of the fishing license in coastal countries is also believed to be a factor. In order to overcome such situations and improve catching volume, it will be possible if excellent manpower is secured, school fishing is expanded, and the production of high value-added catch (purse seine special: PS).

• Journal of Welding and Joining
• /
• 제33권2호
• /
• pp.23-31
• /
• 2015

Stainless steel is used in automobile muffler and exhaust systems. However, in comparison with other steels it has a high thermal expansion rate and low thermal conductivity, and undergoes excessive thermal deformation after welding. To address this problem, we evaluated the use of arc brazing in place of welding for the processing of an exhaust system, and investigated the parameters that affect the joint characteristics. Muffler parts STS439 and hot-dipped Al coated steel were used as test specimens, and CuAl brazing wire was used as the filler metal for the cold metal transfer (CMT) welding machine, which is a low heat input arc welder. In addition, a Box-Behnken design of experiment was used, which is a response surface methodology. The main process parameters (current, speed, and torch angle) were used to determine the appropriate welding quality and the mechanical properties of the brazing part was evaluated at the optimal welding condition. The optimal processing condition for arc brazing was 135A current, 51cm/min speed and $74^{\circ}$ torch angle. The process was applied to an actual exhaust system muffler and the prototype was validated by thermal fatigue, thermal shock, and endurance limit tests.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1497-1498
• /
• 2011

본 논문에서는 -50[$^{\circ}C$]환경에서 케이블 접속함의 극한지역 적용가능 여부를 확인하기 위해 접속함의 주재료인 Etylene Propylene Rubbe(EPR), Silicone Rubber(SR) 및 Epoxy의 물성 및 특성 평가 시험을 진행하였다. 실험방법은 DSC(Differential Scanning Calorimetry)를 사용하여 10[$^{\circ}C$]/min의 승온속도로 각각의 온도구간에서 샘플들의 Tg(Glass Transition Temperature)를 측정하였고, UTM(Universal Testing Machine)으로 -50[$^{\circ}C$]~ 상온에서 인장강도 및 신율을 측정하였다. 본 연구를 동하여, 극한지역의 전력계통 연계 안정성 및 신뢰성 향상을 위한 기초적인 Data-base를 구축했다.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.168-173
• /
• 1999

It is investigated that internal defect of planetary gear which consists of two gears with different number of teeth on both side. The internal defect, central burst, begin to form at the place of adiabatic shear band which usually has maximum ductile fracture value during the forming operation, forward and backward extrusion. It makes the plastic forming of planetary gear difficult. The prediction of defect to minimize the cost to produce the planetary gear. The finite element simulation code DEFORM is applied to analyze the defects. In the analysis, the toothed gears are assumed as axisymmetric cylinders whose diameters are equal to those of pitch circles of the each gears. Experiments were carried out with the SCM415 alloy steel as billet material and AIDA 630-ton knuckle-joint press. The calculated results and experimental inspections are compared to design a die and blank without defects and the results are useful to predict the internal defect.