• 산업식품공학
• /
• 제23권2호
• /
• pp.87-93
• /
• 2019

공기 주입식 스팀-에어 레토르트 내에서 스팀온도, 내부가압, CUT 등의 공정변수가 레토르트 내부의 온도 균일성에 미치는 영향을 평가하였다. 고온살균(121℃)이 저온살균(82℃) 보다 공정구간동안 온도분포가 더 균일하고 안정적이었다. 내부 가압이 클수록 저온살균조건의 공정에서는 온도분포가 안정적이었고, 이와 반대로 고온살균조건의 공정에서 온도분포가 더 불균일한 것으로 나타났다. 승온구간을 조절한 경우에는 레토르트 내의 온도분포에는 유의적인 차이를 나타내지 않았다. 공정구간동안 레토르트 내부에서 냉점은 수직방향 1층의 위로 확인되었고, 수평방향에서는 맨 뒤쪽 중앙 부분이 가장 높은 온도를 유지하여 공정 동안 이 위치들을 주의를 할 필요가 있었다. 또한 레토르트 내부의 양 옆 위치가 다른 위치에 비해 특히 온도분포가 불안정한 것으로 확인되었으므로 레토르트 가공 공정에서 주의해야 할 것으로 판단되었다.

• 한국식품위생안전성학회지
• /
• 제38권5호
• /
• pp.373-380
• /
• 2023

본 연구는 국내 가정에서 사용하고 있는 냉장고 및 냉동고의 온도 분포에 대한 현황을 파악하기 위하여 냉장고 대상 25가구, 냉동고 대상 25가구를 선정하고 온도 측정을 시행하였다. 가정용 냉장 및 냉동고의 실제 공간상의 온도 분포 조사 결과, 냉장고 대상 가구에서 측정된 온도는 최저 -8.2℃, 최고 15.8℃, 평균 3.73℃로 조사되었으며, 공간 위치별 온도 분포는 문 보관 칸 5.06±1.69℃, 내부벽면 4.18±1.19℃, 내부 보관함 3.41±1.36℃로 내부 보관함의 온도가 가장 낮았고, 각 위치에서 상단 및 하단의 유의적인 온도 차이는 문 보관 칸에서만 확인되었다(P<0.01). 냉동고 대상 가구에서 측정된 온도는 최저 -30.3℃, 최고 0.7℃, 평균 -17.95℃로 조사되었으며, 공간 위치별 온도 분포는 문 보관 칸 -17.19±1.68℃, 내부 벽면 -17.81±1.07℃, 내부 보관함 -18.78±1.72℃로 냉장고 결과와 동일하게 내부 보관함의 온도가 가장 낮고, 문 보관 칸에서만 상·하단의 유의적인 온도 차가 확인되었다(P<0.01). 냉장·냉동고 내에서 위치별 최대 온도 차이는 각각 2.18℃, 2.02℃로 확인되었으며, 결론적으로 냉장·냉동고 전체의 온도가 일정하게 유지되는 것이 아니며, 보관되는 위치별로 유의적인 편차가 존재하는 것으로 나타났다. 이에 따라 냉장·냉동고 제조사와 공공기관에서 식품별 권장 보관 위치를 고객들에게 적극적으로 권고하고, 각 가정에서는 온도 변화에 민감한 식품을 보관할 경우 문쪽 보관을 지양하는 등 보관관리 의식을 가져야 할 것으로 사료된다.

• 대한치과보철학회지
• /
• 제17권1호
• /
• pp.23-34
• /
• 1979

In this study, the adhesive strength of three commercial polycarboxylate cements to ten types of dental casting alloys, such as gold, palladium, silver, indium, copper, nickel, chromium, and human enamel and dentine were measured and compared with that of a conventional zinc phosphate cement. The $8.0mm{\times}3.0mm$ cylindrical alloy specimens were made by casting. The enamel specimens were prepared from the labial surface of human upper incisor, and the dentine specimens were prepared from the occulusal surface of the human molar respectively. Sound extracted human teeth, which had been kept in a fresh condition since, extraction, were mounted in a wax box with a cold-curing acrylic resin to expose the flattened area. The mounted teeth were then placed in a Specimen Cutter (Technicut) and were cut down under a water spray, and then the flat area on the all specimens were ground by hand with 400 and 600 grit wet silicone carbide paper. Two such specimens were then cemented together face-to-face with freshly mixed cement, and moderate finger pressure was applied to squeeze the cement to a thin and uniform film. All cemented specimens were then kept in a thermostatic humidor cabinet regulated at $23{\pm}2^{\circ}C.$ and more than 95 per cent relative humidity and tested after 24 hours and 1 week. Link chain was attached to each alloy specimen to reduce the rigidity of the jig assembly, and then all the specimens were mounted in the grips of the Instron Universal Testing Machine, and a tensile load was delivered to the adhering surface at a cross head speed of 0.20 mm/min. The loads to which the specimens were subjected were recorded on a chart moving at 0.50 mm/min. The adhesive strength was determined by measuring the load when the specimen separated from the cement block and by dividing the load by the area. The test was performed in a room at $23{\pm}2^{\circ}C.$ and $50{\pm}10$ per cent relative humidity. A minimum of five specimens were tested each material and those which deviated more than 15 per cent from the mean were discarded and new specimens prepared. From the experiments, the following results were obtained. 1) It was found that the adhesive strength of the polycarboxylate cement to all alloys tested was considerably greater than that of the zinc phosphate cement. 2) The adhesive strength of the polycarboxylate cements was superior to the non precious alloys, such as the copper, indium, nickel and chromium alloys, but it was inferior to the precious gold, silver and palladium alloys. 3) Surface treatment of the alloy was found to be an important factor in achieving adhesion. It appears that a polycarboxylate cement will adhere better to a smooth surface than to a rough one. This contrasts with zinc phosphate cements, where a rough helps mechanical interlocking. 4) The adhesion of the polycarboxylate cement with enamel was found superior to its adhesion with dentine.

• 한국임상수의학회지
• /
• 제16권2호
• /
• pp.375-380
• /
• 1999

This study was conducted to develop an intrauterine inseminator (IUI) to deposit of frozen semen into uterus and to evaluate the results obtained after artificial insemination by IUI. Two Japanese spitzs (2 to 4 years of age) were used as semen donors. Semen was collected by manual masturbation into sterile glass collection tubes and separated into 3 fractions with only the sperm-rich fractions retained for further examination. Sperm motility >70%, sperm concentration of 200 to $400{\times}10^6 cells/ml$$\times$g for 5 min and poured out the suspended solution, and then diluted with 2 ml Tris-buffer which was consisted of 2.4 g Tris, 1.4 g citric acid, 0.8 g glucose, 0.1 $\mu\textrm{g}$/ml streptomycin, 100 IU/ml penicillin, 20 ml egg yolk to 100 ml mili-Q water (Ext I) or supplemented with 8 ml glycerol and 1 ml Equex STM paste to 100 rnl (Ext II). The diluted semen was cooled to 5$^{\circ}C$ in cold room, where the temperature in the sample reached 5$^{\circ}C$. Two h after beginning the cooling procedure, 2 ml of Ext II, also at 5$^{\circ}C$, was added and mixed by gently reversing the tubes several times during 1 h. The final sperm concentration for freezing was approximately $50{\times}10^6 cells/ml$. After equilibration, the semen was loaded into 0.5 ml straw and frozen on the liquid nitrogen vapour in styrofoam box. The straws were thawed at 7$0^{\circ}C$ for precisely 6 sec. After thawing of each straw, the frozen semen can survived over 50% motility. All the females were inseminated twice with 1 ml of $25{\times}10^6 cells/ml$

• 한국식품저장유통학회지
• /
• 제23권4호
• /
• pp.471-478
• /
• 2016

본 연구에서는 신선식품의 품질유통 시스템 구축을 위하여 Peltier 효과를 기반으로 한 열전소자 배송시스템에 잠열재를 탑재한 이동식 저온 컨테이너를 농산물의 유통에 적용하고자 하였다. 실험 방법은 개발된 열전소자 배송시스템 및 개발잠열재를 이용한 이동식 저온 컨테이너에 저장 중 피망의 품질을 평가하여 대조구인 EPS 박스의 피망과 비교 평가하였다. 피망의 저장 중 품질측정 결과, 중량 감소량은 증가하였으나 수분함량은 저장기간동안 90.96~94.43% 수준을 유지하였다. 비타민 C 함량은 감소하는 경향을 나타내었으며 처리구(BPT-5, 10)의 경우 대조구(BPC)에 비해 감소율이 낮게 나타났다. 색도 측정 결과 ${\Delta}E$ 값은 저장기간동안 증가하였으며 21일 때 BPT-5의 ${\Delta}E$ 값은 5.05인데 반해 BPC의 값은 41.8로 크게 증가함을 알 수 있었다. 총균수 또한 저장 21일째 대조구에 비해 BPT-5 처리구가 약 1 log scale 낮은 수준을 나타내어 연구에서 개발한 수배송 용기가 품질 유지에 효과적인 것으로 판단된다. 전체적인 결과를 종합하였을 때, 본 연구를 위하여 개발된 이동식 저온 컨테이너가 피망의 저장성 증가에 효과가 있는 것으로 판단되었다. 하지만 이동식 저온 컨테이너의 개발은 초기단계이며 잠열재의 무게로 인해 하중부담이 크다는 단점을 보완하기 위해 더 많은 연구가 이루어져야 할 것이다.

• 천문학논총
• /
• 제24권1호
• /
• pp.53-64
• /
• 2009

MIRIS is the main payload of the STSAT-3 (Science and Technology Satellite 3) and the first infrared space telescope for astronomical observation in Korea. MIRIS space observation camera (SOC) covers the observation wavelength from $0.9{\mu}m$ to $2.0{\mu}m$ with a wide field of view $3.67^{\circ}\times3.67^{\circ}$. The PICNIC HgCdTe detector in a cold box is cooled down below 100K by a micro Stirling cooler of which cooling capacity is 220mW at 77K. MIRIS SOC adopts passive cooling technique to chill the telescope below 200 K by pointing to the deep space (3K). The cooling mechanism employs a radiator, a Winston cone baffle, a thermal shield, MLI (Multi Layer Insulation) of 30 layers, and GFRP (Glass Fiber Reinforced Plastic) pipe support in the system. Optomechanical analysis was made in order to estimate and compensate possible stresses from the thermal contraction of mounting parts at cryogenic temperatures. Finite Element Analysis (FEA) of mechanical structure was also conducted to ensure safety and stability in launching environments and in orbit. MIRIS SOC will mainly perform Galactic plane survey with narrow band filters (Pa $\alpha$ and Pa $\alpha$ continuum) and CIB (Cosmic Infrared Background) observation with wide band filters (I and H) driven by a cryogenic stepping motor.

• 동아시아식생활학회지
• /
• 제17권3호
• /
• pp.289-303
• /
• 2007

This report includes basic data on nutrition education for Chinese adolescents living in Korea. A total of 183 Chinese adolescents living in Incheon participated in the survey. Body composition was analyzed by the Inbody 4.0., and questionnaires on personal dietary behavior were administrated. When compared with the body measure indices of Korean adolescents, we found that height was similar, but weight greater ($5{\sim}12 kg$) among the participants. Regarding obesity, 30.0% of all students were obese (BMI>25), especially the high school boys (42.0%). But in the case of middle school boys, the rates of obesity and under weight (BMI<18.5) were the same (both of them at 22.9%). The average WHR (Waist Hip Ratio) of the female high school group (0.9) was over the normal range. The average percent body fat for each group was also over the normal range. The percentage of students having breakfast everyday was 52.2%, and the rate of skipping breakfast was 25.0%. In the obesity group, the rate of skipping breakfast was remarkably high (P<0.05). Because lunch service was not available at the schools, a lunch box from home was the most popular pattern (43.1 %), but eating out was also popular at 36.6%. For the male high school students, the eating out rate was 62.8%. Since many have-lived in Korea for a few generations, the students' eating practices were much closer to the Korean pattern. For their ordinary meal pattern, 96.0% of the students included Korean foods. however, for New Years Day, the rate of having Gyo-Ja was 75.2%, and having Wol-Byung at Choo-seok was 78.6%, showing that the Chinese tradition still remains. In the case of food preferences, the percentage having Kimchi everyday was 62.1 %, but those drinking green tea was 13.1 %. For cold drinks, the rate for drinking them more than twice per week was 71.6%. The most preferred cooking method was frying with oil (50.6%). Among the students who had visited China (or Taiwan), the rate for 'bad food familiarity' was 37.0%, and the rate for 'did not know Chinese traditional course menus' was 71.3%. As a result of combining eating practices from both China and Korea, and the absence of lunch service in Chinese schools, students are showing bad dietary behaviors. therefore, it is necessary to provide proper nutrition education and a system for lunch service in Chinese schools.

• 지질공학
• /
• 제25권1호
• /
• pp.93-102
• /
• 2015

지반은 동결이 발생함에 따라 물리적 특성이 변화하며, 동결현상에 따른 기초구조물의 안정성 평가는 설계시 중요한 고려사항 중 하나이다. 본 연구에서는 동결 및 전단과정 중 연직응력 변화에 따른 동결토의 전단강도 및 강성을 평가하고자 하였다. 동결토의 강도평가를 위하여 직접전단실험을 수행하였으며, 직접전단실험 중 강성평가를 위한 전단파 측정을 동시에 수행하였다. 실험수행을 위하여, 동결용 직접전단상자를 제작하였으며, 상·하부 전단상자의 벽면에는 전단파 트랜스듀서인 벤더 엘리먼트를 각각 설치하였다. 시료는 주문진사 및 실트, 그리고 증류수를 이용하여 포화도 10%로 혼합하였으며, 상대밀도가 모든 조건에서 동일하게 유지되도록 조성하였다. 조성된 시료는 -5℃까지 동결을 진행시킨 후, 온도를 유지한 상태로 직접전단실험을 수행하였다. 동결 및 전단과정 중 시료에는 다양한 크기의 연직응력이 가해졌으며, 전단과정 중 수평변위에 따른 전단응력 및 수직변위, 그리고 전단파를 측정하였다. 실험결과, 모든 구속조건의 경우에서 동결 혹은 전단과정의 연직응력이 증가함에 따라 전단강도는 증가하였으며, 전단과정의 연직응력만 증가한 경우보다 동결과정의 연직응력도 함께 증가한 경우 전단강도가 더 크게 증가하는 것으로 나타났다. 또한, 전단파 속도의 변화는 측정위치에 따라 다른 경향을 보였으며, 전단면을 통과하여 측정한 경우 전단파 속도는 전단변형이 진행됨에 따라 감소하는 것으로 나타났다. 본 연구는 동결 및 전단과정 시 구속조건의 효과를 평가한 연구로써, 포화도가 낮은 상태의 동결토의 강도 및 강성에 대한 기초자료로 활용될 수 있을 것으로 예상된다.

• 한국산학기술학회논문지
• /
• 제18권7호
• /
• pp.554-564
• /
• 2017

본 연구의 목적은 저온저장 사과의 시장동향, 저장실태 및 출하시기 조사를 통하여 사과재배 농가들이 최적의 사과출하 시기를 결정할 수 있도록 지원하기 위한 것이다. 사과 주산지인 경상북도 대구지역의 사과재배 농가 300개소를 대상으로 설문을 실시하여 재배품종, 재배면적, 저장 및 출하실태 등을 조사하였다. 주요 연구결과는 다음과 같다. 생육시기에 따른 사과재배 비율을 조사한 결과, 조생종, 중생종 및 만생종 사과의 재배비율은 각각 78.3%, 63.7%, 96.0%였다. 또한, 조사대상 농가 중 48.7%가 저온저장시설을 보유하고 있었다. 박스(15kg) 당 평균 저장비용은 자가 저장 시에 978.3원이었으며, 위탁시에는 1,771.8원으로 나타났다. 11월부터 4월까지 6개월에 걸쳐 전체 저온저장 사과의 91.6%가 출하되고 있었다. 일반 저장창고에 저장된 사과를 포함한 연간 사과출하량은 744.4박스였으며, 저온 저장된 사과의 연간 출하량은 616박스였다. 저장사과는 '도매시장'으로 출하되는 비율이 가장 높았으며, '산지수집상'과 '대형마트'가 그 뒤를 이었다. 사과의 수송방법은 일반트럭을 이용하는 비율이 가장 높았으며, 저온탑차와 택배의 비율이 그 뒤를 이었다. 시기별 사과출하를 결정하는 요인을 분석한 결과, 오프시즌(5~월)에는 저장비용, 감모율, 관행출하 등의 영향을 받았다. 한편, 일반출하기(11~월)의 사과출하 결정요인들은 미래 기대가격, 저장비용 및 선도농가의 의사 변수가 통계적으로 유의적이었다. 일반출하의 비중이 높은 농가들의 사과출하 결정요인은 미래에 받을 가격에 대한 기대, 저장비용, 고소득에 대한 기대, 선도농가의 의사결정에 영향을 받고 있는 것으로 나타났다.

• Applied Microscopy
• /
• 제7권1호
• /
• pp.21-43
• /
• 1977

This experiment was undertaken in order to localize the labeled dbcAMP (dibutyryl cyclic AMP) in oocytes whose development has been suppressed by cold dbcAMP for 6 or 19 hours in vitro. Mouse oocytes were obtained from the ovaries of 3-4 week old A strain female mice, by puncturing the Graafian follicles in the modified Krebs-Ringer bicarbonate salt solution under the dissecting microscope. Those oocytes which have intact germinal vesicle were cultured in the basic culture medium supplemented with 0.4% bovine serum albumin (BSA). Cultivation of the oocytes was carried out in a microtube developed by Cho (1974). The cultures were then incubated in a humidified 5% $CO_2$ incubator maintained at $37^{\circ}C$ for 6 or 19 hours (Donahue, 1968). DbcAMP was added to culture medium for a final concentration of 100ug/ml, and $^3H-dbc$ AMP (specific activity 13 Ci/mM) for a final concentration of $40{\mu}Ci/ml$ was also added to the medium. For electron microscopic autoradiography, those oocytes recovered from the culture were washed with phosphate buffer (pH 7.4), and immediately prefixed in a 2.5% glutaraldehyde overnight and postfixed for 2 hours at $4 ^{\circ}C$ in 1% osmium tetroxide in phosphate buffer with pH 7.4 (Palade, 1952). After fixation, the materials were dehydrated in graded alcohol series and embedded in Epon 812 mixture based on the standard procedures (Luft, 1961). The thin sections $600-700{\AA}$ thick were mounted on the grids of 200 meshes. The grids containing sections were coated with a nuclear emulsion Kodak NTB-3 and stored in a cold dark box (at $4^{\circ}C$) for 3 weeks. After exposure, the samples were developed with Kodak D-19 and stained with uranyl acetate and lead citrate. Routine observation was made with Hitachi HU-11E electron microsocope. The results of the observation were as followings: 1. It was found that the labeled dbcAMP penetrated the egg plasma membrane and dispersed at random in the cytoplasm. 2. It was also observed that most of the labeled dbcAMP was attached to microfibrillar lattices portion of the oocyte cytoplasm. There fore, it is presumed that the receptor of the dbcAMP is localized in the microfibrillar lattices of the oocyte. 3. It also seems that some other cell organells such as mitochondria, Golgi complex, cortical granules are not directly related to the action of the dbcAMP. 4. The labeled dbcAMP was neither observed in the membrane nor in the nucleus. Therefore, it seems that there is no relationship between the concentration of dbcAMP and the nuclear membranous permeability. 5. There was no difference in number of dbcAMP particles when oocytes were cultured for 6 hours and 19 hours. 6. However, it was observed that, in same of the oocytes suppressed in germinal vesicle by dbcAMP for 19 hours, cell organells were moved and concentrated to a small portion of the cytoplasm, and that the morphology of the organells greatly changed to an abnormal. form. Therefore, it is supposed that those oocytes were in the process of degeneration. From the above results, it is expected that dbcAMP penetrated the egg membrane and was bound to the receptor which seems to be located in the microfibrillar lattiees portion, and that this dbcAMP-receptor complex inhibited some enzyme system of the oocytes which are essential for the germinal vesicle breakdown.