• 제목/요약/키워드: Cold box

검색결과 131건 처리시간 0.021초

고온환경 작업을 위한 펠티어 소자 냉각복 개발 및 쾌적성 평가 (Development of Cooling Garment for Extremely Hot Environment Using a Peltier Device and its Comfort Properties)

  • 정예리;채영진;김은애
    • 한국의류학회지
    • /
    • 제36권1호
    • /
    • pp.1-11
    • /
    • 2012
  • This paper reports on a prototype cooling garment applying a cooling module. The cooling module was composed of a Peltier device, a cold sink, a heat sink and two fans. A constant box was used to evaluate the cooling effect of the module. Two cooling modules were attached on each side of the garment. The wear trial was conducted using 10 male subjects in an environmental chamber maintained at $30{\pm}0.5^{\circ}C$, $50{\pm}5%$RH. Subjective sensations of thermal, humidity, and comfort were surveyed. Statistical package SPSS12.0 was used for the t-test and the Wilcoxon signed-rank test. The results showed that most effective cooling module decreased the temperature of the constant temperature box by $-4.9^{\circ}C$. The micro-temperature of the cooling garment with a Peltier device was lower than the control garment during the exercise. In particular, the chest skin temperature was $1.5^{\circ}C$ lower with the cooling garment than the control. The maximum temperature difference was $-2.57^{\circ}C$ on the sides of the $1^{st}$ layer. Subjective thermal sensation from wear trials of the Peltier device attached garment was lower than the control garment. Subjects felt more comfortable with the cooling garment in almost all the periods.

Cloning And Characterization of Pathogen-Inducible EREBP-Like Transcription Factor(CaNR19) From Hot Pepper (Capsicum annuum L.)

  • Yi, So-Young;Kim, Jee-Hyub;Yu, Seung-Hun;Park, Doil
    • 한국식물병리학회:학술대회논문집
    • /
    • 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
    • /
    • pp.77.2-78
    • /
    • 2003
  • An EREBP/AP2-type transcription factor (CaPFl) was isolated by DDRT-PCR following inoculation of soybean pustule pathogen Xanthomonas axonopodis pv. glycines Bra which induces HR on pepper leaves. Genomic Southern blot analysis revealed that the CaPFl gene is present as a single copy within the hot pepper genome. The deduced amino acid sequence of CaPFl has two potential nuclear localization signals, a possible acidic activation domain, and an EREBP/AP2 motif that could bind to a conserved cis- element present in promoter region of many stress-induced genes. The mRNA level of CaPFl was induced by both biotic and abiotic stresses. We observed higher-level transcripts in resistance-induced pepper tissues than diseased tissues. Expression of CaPFl is also induced upon various abiotic stresses including ethephon, MeJA, cold stress, drought stress and salt stress treatments. To study the role of CPFI in plant, transgenic Arabidopsis and tobacco plants which express higher level of pepper CaPFl were generated. Global gene expression analysis of transgenic Arabidopsis by cDNA microarray indicated that expression of CaPFl in transgenic plants affect the expression of quite a few GCC box and DRE/CRT box-containing genes. Furthermore, the transgenic Arabidopsis and tobacco plant, expressing CaPFl showed tolerance against freezing temperature and enhanced resistance to Pseudomonas syrnigae pv. tabaci. Taken together, these results indicated that CaPFl is a novel EREBP/AP2 transcription factor in hot pepper plant and it may has a significant role(s) in regulation of biotic and abiotic stresses in plant.

  • PDF

감귤에서 분리한 Metallothionein 유전자의 발현분석 및 게놈 DNA (Expression Patterns and Isolation of Genomic DNA of a Metallothionein-like Gene from Citrus (Citrus unshiu Marc. cv. Miyagawa))

  • 김인중
    • 식물조직배양학회지
    • /
    • 제28권5호
    • /
    • pp.231-237
    • /
    • 2001
  • Differential screening을 통해 Moriguchi등 (1998)이 분리한 유전자와 상동성을 나타내는 CitMT45 유전자의 cDNA를 분리하였다. 본 실험에서 분리한 cDNA는 Moriguchi등 (1998)이 분리한 cDNA에 비해 긴 3' UTR을 가지고 있었다. 잎과 과피, 과육에서 CitMT45 유전자의 발현분석을 northern blot을 통해 수행한 결과, 발달단계에 따라 증가하는 비슷한 앙상을 관찰할 수 있었으나, 과육, 과피, 잎의 순으로 그 발현 양이 많았다. 이들의 발현조절에 대한 정보를 얻기 위해 게놈 DNA를 분리한 결과, CitMT45 게놈 구조는 3개의 exon과 2개의 intron으로 구성되어 있었고, primer extension 분석을 통해 CitMT45 유전자의 발현은 3개의 부위에서 개시되고 있음을 알 수 있었다. 전사개시부위의 5'upstream 지역에서 TATA box와 CCAAT box뿐만 아니라, 금속이온과 온도변화에 의한 조절에 중요한 부위로 알려진 cis-element를 발견하였다.

  • PDF

박스형 이중외피와 커튼월의 냉방기 열적성능에 관한 비교실험 연구 (A Comparative Experimental Study on Thermal Performance of Box-typed Double Skin and Curtain Wall in Cooling Period)

  • 박창영;이건호;윤용상;최창호
    • 한국태양에너지학회 논문집
    • /
    • 제27권2호
    • /
    • pp.111-119
    • /
    • 2007
  • The annual mean temperature of South Korea has risen by $1.3^{\circ}C$ for last 100 years by urbanization and industrialization. Especially, the frequency of unusual hot weather in summer increases for a long time and the frequency of unusual cold weather in winter clearly decreases. In recently, The considerable portion of curtain wall system is appled to building skin in domestic. As related to this, the Korea Institute of Construction Technology devised the box typed double skin facade(It is occasionally called as FDFS : Functional Double Facade System) as an alternative that reflects the distinctive local climate and saves cooling energy. Two mock-ups($49m^*4.9m$) applied to single skin(curtain wall) and double skin each were monitored under the outdoor condition. Therefore, the characteristics of natural ventilation and cooling energy consumption of each window had been analyzed in real time. The results of this study are summarized as follow, Analysis of the experiment on an air conditioner: the indoor temperature of the chamber with FDFS is lower than that of the chamber with single skin facades by $3{\sim}6$ degrees(C). A temperature variation of about $1{\sim}2$ degrees between the 0.2m and 1.7m height of the mock-up occurs in FDFS, while that of about maximum 7 degrees occurs in single skin facade at noon with abundant intensity of solar accident. Also, 67 percent of energy consumption for air conditioning has been saved.

조립각형 CFT 기둥의 용접크기 결정을 위한 수압실험 및 해석 (Water pressure Test and analysis for Welding Thickness Decision of New Cold-formed Type Concrete Filled Tubular Square Column)

  • 이성희;김선희;김영호;최성모
    • 한국강구조학회 논문집
    • /
    • 제21권5호
    • /
    • pp.515-526
    • /
    • 2009
  • 콘크리트 충전강관에 사용되는 강관의 제작법은 재단된 4장의 플레이트를 모서리에서 용접하는 일반강관 제작법과, ㄷ형으로 절곡성형과정을 거쳐 2-Seam으로 용접하는 제작방법, 그리고 원형강관을 압축하여 4각형태로 만드는 방법등이 일반적으로 사용되며, 강관제작에 사용되는 용접방법과 용접량의 선택은 강관 제작비용에 큰 부분을 차지하고 있다. 새로운 제작형식으로 개발된 각형강관은 4장의 플레이트를 ㄱ형으로 절곡성형한 후 강관 폭의 중앙에서 4-Seam Flare 용접하는 방식이다. 본 연구에서는 새로운 제작형식의 CFT 각형 기둥에 대하여 용접량 평가를 위한 실험방법을 제시하고, 강관 제작법, 강관두께 및 용접량을 변수로 총 6개의 실험체를 제작하여 구조실험 및 해석을 수행하여 강관내부의 수압에 따른 강관의 거동을 평가하였다.

Development of the Near Infrared Camera System for Astronomical Application

  • 문봉곤
    • 천문학회보
    • /
    • 제35권1호
    • /
    • pp.39.2-39.2
    • /
    • 2010
  • In this paper, I present the domestic development of near infrared camera systems for the ground telescope and the space satellite. These systems are the first infrared instruments made for astronomical observation in Korea. KASINICS (KASI Near Infrared Camera System) was developed to be installed on the 1.8m telescope of the Bohyunsan Optical Astronomy Observatory (BOAO) in Korea. KASINICS is equipped with a $512{\times}512$ InSb array enable L band observations as well as J, H, and Ks bands. The field-of-view of the array is $3.3'{\times}3.3'$ with a resolution of 0.39"/pixel. It employs an Offner relay optical system providing a cold stop to eliminate thermal background emission from the telescope structures. From the test observation, limiting magnitudes are J=17.6, H=17.5, Ks=16.1 and L(narrow)=10.0 mag at a signal-to-noise ratio of 10 in an integration time of 100 s. MIRIS (Multi-purpose InfraRed Imaging System) is the main payload of the STSAT-3 in Korea. MIRIS Space Observation Camera (SOC) covers the observation wavelength from $0.9{\mu}m$ to $2.0{\mu}m$ with a wide field of view $3.67^{\circ}{\times}3.67^{\circ}$. The PICNIC HgCdTe detector in a cold box is cooled down below 100K by a micro Stirling cooler of which cooling capacity is 220mW at 77K. MIRIS SOC adopts passive cooling technique to chill the telescope below 200K by pointing to the deep space (3K). The cooling mechanism employs a radiator, a Winston cone baffle, a thermal shield, MLI of 30 layers, and GFRP pipe support in the system. Opto-mechanical analysis was made in order to estimate and compensate possible stresses from the thermal contraction of mounting parts at cryogenic temperatures. Finite Element Analysis (FEA) of mechanical structure was also conducted to ensure safety and stability in launching environments and in orbit. MIRIS SOC will mainly perform the Galactic plane survey with narrow band filters (Pa $\alpha$ and Pa $\alpha$ continuum) and CIB (Cosmic Infrared Background) observation with wide band filters (I and H) driven by a cryogenic stepping motor.

  • PDF

신선 멜론의 수출포장개발에 관한 연구 (Study on Development of Export Packaging for Fresh Melon)

  • 이명훈;정준재
    • 한국포장학회지
    • /
    • 제15권3호
    • /
    • pp.83-91
    • /
    • 2009
  • 미국과의 FTA 체결이 가시화되면서 우리 농산물에 대한 경쟁력과 농가의 소득증대를 위해 멜론수출사업이 시작되는 단계에서 장거리 운송에 상품성을 유지할 수 있는 수출 포장기술의 개발과 포장표준화에 의한 물류비 절감이 필요하다. 본 연구는 수출포장의 1단계라고 할 수 있는 적정포장 설계 부분, 즉 포장강도 및 치수규격 그리고 포장원가 관리 부분에 목적이 있다. 수출대상국인 미국과 일본의 국가표준 파렛트는 각각 T12형($1,200{\times}1,000$ mm)과 T11형($1,100{\times}1,100$ mm)이다. 기존 멜론상자 치수는 $366{\times}275{\times}160$ mm으로 T11형에는 정합하지만, T12형에는 효율성이 떨어지므로 포장모듈치수에 의거하여 멜론상자를 재설계하여, $366{\times}275{\times}165$ mm와 $333{\times}300{\times}200$ mm의 두 가지 규격으로 개선 멜론상자를 설계하였다. $366{\times}275{\times}165$ mm로 개선된 상자는 T11형 파렛트에 적재효율 92.7%, 공간효율 99.8%를 나타내며 일본수출용 멜론상자로 사용할 수 있었고, $333{\times}300{\times}200$ mm로 개선된 상자는 T12형 파렛트에 적재효율 91.7%, 공간효율 95.9%를 나타내며 미국수출용 멜론상자로 사용할 수 있었다. 기존 멜론상자의 포장재질은 SC240/B150/K180/B150/WK180이며, 압축강도 는 559 kgf, 관리강도는 475 kgf이었지만, 개선 멜론상자의 포장재질은 SC240/K180/K180/K180/WK180로써, 압축강도는 597 kgf, 관리강도는 5.7 kgf으로 증가하도록 강도를 높였다. 멜론상자의 1개당 단가는 기존 438원이었으나, 실제로 1,000에 거래하여 개선하도록 요구하였다. $366{\times}275{\times}165$ mm와 $333{\times}300{\times}200$ mm의 치수규격의 개선 멜론상자의 1개당 단가는 각각 484원과 470원으로 나타났다. 기존 포장재의 진동시험 결과 기존 멜론상자는 멜론의 상품화가 되지 않을 정도의 멜론 파손정도가 심했지만, 개선 멜론 상자는 처음 포장형태 그대로 멜론의 상태가 유지되어 상품화에 문제가 없었다.

  • PDF

농산물 유통과정에서 복숭아의 품질유지를 위한 마스터 포장 시스템 (A Master Packaging System for Preserving Qualities of Peaches in the Fresh Produce Supply Chain)

  • 정미진;안덕순;박우포;이동선
    • 한국포장학회지
    • /
    • 제19권1호
    • /
    • pp.7-10
    • /
    • 2013
  • 신선 농산물 공급체인에서 최종적으로 소비자에게 신선한 복숭아를 공급할 수 있는 통합적 마스터 포장 시스템을 구성하고 그 효과를 실험적으로 검증하고자 하였다. 마스터 포장 시스템은 $35{\mu}m$ 두께의 LDPE 필름 bag에 6개의 300 g 낱개 복숭아의 $30{\mu}m$ OPP 개별포장을 포함하는 것으로 구성하였다. 개별포장에 직경 $59{\mu}m$의 미세공을 1, 3, 7개로 두는 변수조건을 두어서 $5^{\circ}C$의 저온단계 저장과 $20^{\circ}C$의 유통판매단계에서 포장기체조성과 품질변화를 측정하여 비교하였다. $5^{\circ}C$에서 일정기간 저장한 마스터 포장은 해체하여 $20^{\circ}C$ 조건으로 옮겨서 3일간 보관하는 조건으로 실험하였다. 대조구로서 필름에 싸지 않고 골판지 상자에 복숭아를 6개씩 담아서 같은 온도조건에서 보관하였다. 7개 미세공을 가진 포장이 $5^{\circ}C$의 저온단계 저장과 $20^{\circ}C$의 유통판매단계에서 6~10%의 $O_2$ 농도와 11~19% $CO_2$ 농도를 유지시켜 가장 적정 MA 조건에 가까운 기체조성을 유지할 수 있는 것으로 판단되었다. 이보다 작은 미세공을 가진 포장은 일련의 연속적인 저장에서 혐기적인 조건을 유발하였다. 대조구와 비교하여 마스터 포장의 모든 처리구는 낮은 중량손실과 양호한 경도 유지를 보여주었다.

  • PDF

종근 저장 온도 및 충진제가 강황 수량 및 품질에 미치는 영향 (Effect of Temperatures and Fillers on Yield and Quality of Turmeric (Curcuma longa L.) During Postharvest Seed Rhizome Storage)

  • 임정대;김은혜;윤재연;박해일;심훈섭;최리나;양예슬;박충범;안영섭;정일민
    • 한국약용작물학회지
    • /
    • 제21권5호
    • /
    • pp.334-341
    • /
    • 2013
  • Studies were carried to evaluated the influence of storage method by temperatures and fillers on yield and quality of seed rhizome in turmeric. Seed rhizome was stored at styrofoam box filled with rice hull and sand (3:1) or vermiculite for 30, 60 and 90 days at different temperatures (5, 10 and $15^{\circ}C$. compared to traditional method (rhizome only). Parameters were obtained for weight loss, cold injury, percentage of decayed in stored rhizome during storage periods. Also, the germination, growth pattern and yield from stored rhizome has been investigated. It was confirmed that storage of turmeric in stored with filled with vermiculite helps in prevention of rhizomes from microbial and fungal attack. The storage of rhizomes in styrofoam box without any filler at low temperature below $10^{\circ}C$. is not advocated due to heavy losses weight and decayed in management of postharvest for turmeric rhizome. Germination percentage, growth pattern and yield was maximum for rhizomes stored at styrofoam box filled with vermiculite for 90 days at $15^{\circ}C$. The paper outlines a brief attempt to assess the efficacy of non-chemical methods including optimal storage method (temperature and filler) of control of decay and moisture losses during storage of turmeric.

What is Happening in the East Sea (Japan Sea)?: Recent Chemical Observations during CREAMS 93-96

  • Kim, Kyung-Ryul;Kim, Kuh
    • Journal of the korean society of oceanography
    • /
    • 제31권4호
    • /
    • pp.164-172
    • /
    • 1996
  • CREAMS (Circulation Research of the East Asian Marginal Seas) Expeditions have provided a rare opportunity to carry out precise measurements of salinity, temperature and chemical tracers extensively in all major basins of the East Sea (Japan Sea) in 1993-1996 for the first time in more than 60 years since Uda's investigation (Uda, 1934). Studies revealed unequivocal evidence that the East Sea Proper Water (ESPW), previously known as a single homogeneous water mass, is indeed made of several distinct water masses. CREAMS data further confirmed the earlier observations of Gamo et al. (1986) that properties in Deep Waters in the East Sea have been changing during at least the last 25 years. There is evidence, especially from the analysis of the DO profile, that these changes may result from a major change in the mode of deep water formation: from bottom water formation in the past to intermediate/deep water formation in recent years. The causes for these changes are not clear at the present time, but nay include natural variation and may also reflect recent global changes in regional scale. A moving-boundary box model is presented to describe current observations, predicting the turnover time of the total deep and bottom waters to the cold surface waters to be ${\sim}$80 years in 1996.

  • PDF