• 한국습지학회지
• /
• 제21권spc호
• /
• pp.123-133
• /
• 2019

본 연구는 2018년에 발생한 폭염 및 한파 발생 기간을 대상으로 습지의 지면온도 완화효과를 평가하기 위해 위성관측 지표면 온도(Land Surface Temperature, LST)와 지상 관측 기온 자료를 활용해 토지 이용별 특성 분석을 실시하였다. 폭염 기간에는 폭염주의보 발령 기준인 최고기온 33℃ 이상인 지역, 한파 기간은 한파주의보 발령 기준인 최저기온 -12℃ 이하의 지역을 대상으로 하였다. 위성 자료로는 Terra/Aqua Moderate Resolution Imaging Spectroradiometer (MODIS)의 Daytime, Nighttime LST 자료, 지상 관측 기온 자료로는 전국 86개소의 종관기상관측장비(Automated Surface Observing System, ASOS) 지점에 대한 최고 및 최저 자료를 수집하여 데이터베이스를 구축하였다. 분석 결과, 한파 기간을 대상으로 하였을 때 산림의 지면온도의 평균이 -12.7℃로 가장 높았으며, 그 뒤로 밭과 습지가 각각 -12.9℃와 -13.0℃로 나타나 평균이 가장 낮은 도시의 -14.4℃에 비해 1.4℃ 더 높았다. 폭염 기간에도 도시지역의 평균이 34.6℃로 가장 높았고 습지는 33.0℃로 도시지역과 - 1.6℃의 차이를 보여 습지의 지면온도 완화효과를 확인하였다. 습지는 기간에 따라 차이는 있으나 지면온도의 완화 기능을 발휘하였고, 원격탐사 영상을 이용한 확인이 가능하였다.

• 한국지리정보학회지
• /
• 제22권4호
• /
• pp.197-214
• /
• 2019

본 연구에서는 Terra/Aqua MODIS LST(Moderate Resolution Imaging Spectroradiometer Land Surface Temperature)의 Daytime, Nighttime 자료와 기상청 기상관측소 86개 지점에 대한 최고, 최저 및 평균기온을 이용하여 두 자료 사이의 상관성을 분석하고, 한파 및 폭염 발생 기간의 특성을 집중적으로 분석하였다. 모든 자료는 2008년부터 2018년까지 총 11년간 일별로 구축하였으며, Pearson 상관계수(Pearson correlation coefficient, R)와 평균제곱근오차(Root Mean Square Error, RMSE)를 이용하여 상관성 분석을 수행하였다. 시계열 분석 결과, 대상 기간 전체에서 기온과 MODIS LST 간의 변동 양상은 유사하였고, 최고 기온과 MODIS 자료의 R 0.9 이상, 평균기온과 최저 기온과는 0.8 이상으로 기온과 MODIS LST 사이의 상관성은 높은 것으로 나타났다. 특히, 최고 기온은 Terra MODIS LST Daytime과 정확도가 제일 높고, 최저 기온은 Terra MODIS LST Nighttime과 상관성이 제일 높은 것으로 분석되었다. 한파 기간에는 Terra/Aqua MODIS 모두 주간 자료보다 야간 자료의 상관성이 더 높은 것으로 분석되었으며, 특히 Terra MODIS LST Nighttime과의 상관성이 좋은 것으로 분석되었다. 폭염 기간에는 Aqua MODIS LST Daytime 자료가 가장 좋은 것으로 분석되었으나, 전체적인 R이 0.5보다 낮아 추후 활용을 위해서는 식생이나 토지이용, 고도 등 다른 요소를 활용한 추가 분석이 필요할 것으로 판단된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.383-388
• /
• 1994

Ultrasonic sensor for evaluating plastic anisotropy was developed. Magnetostrictive type EMAT is sensor to transmit and receive the Lamb wave using magnetostriction. It is suitable for on line processing because of transmitting and receiving ultrasonic without contact ODCs(orientation distribution coefficients), W $_{400}$. W $_{420}$. W $_{440}$. were respectively calculated using zeroth order Lamb wave velocities, the calculated ODCs was used for evaluating plastic anisotropy, the results was compared for mean values of destructive tests. Besides, the Lorentz EMAT for generating longitudinal wave and two shear waves simultaneously and the Lorentz type EMAT for measuring SH wave velocities were made. ODCs were calculated using the measured resonant modes and velocities. the results of two methods show possibility of an line processing measurement.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2167-2173
• /
• 2000

The HANARO (High-flux Advanced Neutron Application Reactor) has operated since 1995. The Cold Neutron(CN) hole was implanted in the reflector tank from the design stage. Before a vacuum chamber and a moderator cell for the cold neutron source are installed into the CN hole, it is necessary to measure the exact size of the inside diameter and thickness of the CN hole to prevent the interference problem. Due to inaccessibility and high radiation field in the CN hole, a mechanical measurement method is not permitted. The immersion ultrasonic technique is considered as the best method to measure the thickness and the diameter. The 4 axis manipulator of the 2 channel of a sensor module was fabricated. The transducer of 10 MHz results in 0.03 nun of resolution. The inside diameter and thickness for 550 points of the CN hole were measured using 2 channel ultrasonic sensors. The results showed that the thickness is in the range of 13-6.7 mm and inside diameter is in the range of o 156-165. These data will be a good reference in the design of a cold neutron source facility.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권11호
• /
• pp.519-526
• /
• 2005

This paper presents computer simulation results for developing new type of SF$_{6}$ Circuit Breaker in terms of cold gas flow after small current interruption. This cold gas flows down a nozzle into the chamber of a circuit breaker. There are many difficult problems in analyzing the gas flow due to complex geometry, moving boundary, shock wave and so on. When predicting the dielectric capability of a gas circuit breaker after interruption, the gas pressure and density distributions due to the cold gas must be considered in addition to the electrical field imposed across the gas. A self-coded computational fluid dynamics (CFD) program is used for the simulation of cold gas flow in order to evaluate the electrical field characteristic across open contacts and transient characteristics of insulations after small current interruption.

• 한국지리정보학회지
• /
• 제23권3호
• /
• pp.220-235
• /
• 2020

도시에서의 폭염발생은 기본적으로 지구온난화에 영향을 받으나, 도시에서 발생하는 인공열 배출과 열축적이 큰 토지피복의 영향으로 더욱 가중된다. 특히 도시폭염의 영향은 야간 열대야 발생에도 직접적 영향을 준다. 그러나 기본적으로 주간의 폭염대응에 비해 열대야 대응수단 선택은 매우 제한적이다. 본 연구에서는 대구시를 대상으로 열대야 대응 방안으로 야간 찬공기 유동 특성을 분석하고 이의 공간적 활용가능성을 제시하고자 하였다. 연구방법은 찬공기 유동 분석 프로그램인 KLAM_21을 활용하여 대구시의 찬공기 유동의 공간적 특성인 찬공기 높이 및 유동범위와 유속 및 유동방향을 정량적으로 분석하였다. 분석결과 대구시 주변산지에서의 찬공기 생성, 유동은 매우 활발하나 열대야 발생지역인 도심지역으로 유입이 제한적인 것으로 나타났다. 그러나 일부 시가지에서는 주변산지로부터 유입되는 찬공기 유동성이 매우 활발하여 열대야 대응에 매우 효과적인 공간적 조건을 가지고 있는 것으로 나타났다. 이러한 공간적 조건을 도시계획적 차원에서 활용하면 열대야 대응방안 개발에 매우 유용할 것으로 판단된다.

• Steel and Composite Structures
• /
• 제2권6호
• /
• pp.411-428
• /
• 2002

Non-linear large-displacement elasto-plastic finite element analyses are used to propose design recommendations for the eaves bracket of a cold-formed steel portal frame. Owing to the thinness of the sheet steel used for the brackets, such a structural design problem is not trivial as the brackets need to be designed against failure through buckling; without availability of the finite element method, expensive laboratory testing would therefore be required. In this paper, the finite element method is firstly used to predict the plastic moment capacity of the eaves bracket. Parametric studies are then used to propose design recommendations for the eaves bracket against two potential buckling modes of failure: (1) buckling of the stiffened free-edge into one-half sine wave, (2) local plate buckling of the exposed triangular bracket area.The results of full-scale laboratory tests on selected geometries of eaves bracket demonstrate that the proposed design recommendations are conservative. The use of the finite element method in this way exploits modern computational techniques for an otherwise difficult structural design problem.

• Nuclear Engineering and Technology
• /
• 제30권2호
• /
• pp.140-147
• /
• 1998

Basic concept of a cold neutron source for a 30 MW heavy water moderated reactor (HANARO) is developed. The source is a cold bottle located in a vertical hole near the reactor core. Since the bottle does not have sufficient volume for cooling, the optimum liquid mixture ratio is studied between liquid hydrogen and liquid deuterium. We also studied the variation of the gain depending on the volume of the bottle. The calculation is performed by a coupled MCNP model and by a semi-analytic approach. For the current geometry, 80% liquid deuterium mixture with liquid hydrogen gives the highest gain at 10 A neutron wave.

• Journal of Mechanical Science and Technology
• /
• 제16권7호
• /
• pp.927-934
• /
• 2002

The HANARO ( High-flux Advanced Neutron Application Reactor) has been operated since 1995. The Cold Neutron (CN) hole was implanted in the reflector tank from the design stage. Before a vacuum chamber and a moderator cell for the cold neutron source are installed into the CN hole, it is necessary to measure exactly the size of the inside diameter and thickness of the CN hole to prevent the interference problem. Due to inaccessibility and high radiation field in the CN hole, a mechanical measurement method is not permitted. The immersed ultrasonic technique is considered as the best way to measure the thickness and the diameter of the CN hole. The 4-Axis manipulator was designed and fabricated for locating the ultrasonic sensors. The transducer of an ultrasonic sensor having 10 MHz frequency leads to high resolution as much as 0.03mm. The inside diameter and thickness of 550 points of the CN hole were measured using 2 channel ultrasonic sensors. The results show that the thickness and inside diameter of the CN hole is in the range of 3.3∼6.7mm and 156∼ 165mm, respectively. This data will be a good reference for the design of the cold neutron source facility.

• 한국한의학연구원논문집
• /
• 제2권1호
• /
• pp.454-484
• /
• 1996

There are many factors to evoke pain, for example cold, heat, seven emotion, digestion, fatigue, venemous worms, deficiency of blood etc., and its pathogenesis is complicated. Treatments for pain in oriental medicine are as follows. 1. Pharmacotherapy is a method to treat pain by different effects of herbal medicine, for example, regulating vital energy, activating blood circulation, eliminating phlegm, and dispelling the cold evil etc. 2. Acupuncture and moxibustion therapy is a kind of external application, it has a distinct effect in relieving pain. Recently its operation method has been more developed, so new acupuncture therapies are used in clinics. There are electroacupuncture, auricular acupuncture and injection of drugs at an acupuncture points etc. 3. Oriental physiotherapy is a treatment method to stimulate acupuncture points and meridians. (1) Hot pack, Paraffin bath, Microwave, Ultrasound, Short wave, Infra-red etc. are used to treat cold syndrome by dispersing cold by warming the channels. (2) E.S.T., I.C.T., T.E.N.S., S.S.P., cupping treatment etc. are used to treat disorders of vital energy. (3) Health ion, Carbon, T.D.P., etc are used to treat conic and deficiency syndrome.