• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• Economic and Environmental Geology
• /
• v.38 no.6 s.175
• /
• pp.717-729
• /
• 2005

Peak cooling load of large buildings is generally greater than their peak heating load. Internal and solar heat gains are used fur selection of adquate equipment in large building in cold winter climate like Canada and even Korea. The cost of geothermal heat exchanger to meet the cooling loads can increase the initial cost of ground source heat pump system to the extend less costly conventional system often chosen. Thermal ice storage system has been used for many years in Korea to reduce chiller capacity and shift Peak electrical time and demand. A distribution system designed to take advantage of heat extracted from the ice, and use of geothermal loop (geothermal heat exchanger) to heat as an alternate heat source and sink is well known to provide many benifits. The use of thermal energy storage (TES) reduces the heat pump capacity and peak cooling load needed in large building by as much as 40 to $60\%$ with less mechanical equipment and less space for mechanical room. Additionally TES can reduce the size and cost of the geothermal loop by 1/3 to 1/4 compared to ground coupled heat pump system that is designed to meet the peak heating and cooling load and also can eliminate difficuties of geothermal loop installation such as space requirements and thermal conditions of soil and rock at the urban area.

• Journal of Life Science
• /
• v.26 no.11
• /
• pp.1237-1244
• /
• 2016

A comprehensive analysis of the genetic diversity and relationship of the cold-water fishery walleye pollock (Theragra chalcogramma), the most abundant economically important fishery resource in the East sea of Korea, has not been carried out, despite its importance in Korea. The present study assessed the genetic diversity and relationship between five walleye pollock populations (Korean population, Russian population, USA population, and Japanese populations) of T. chalcogramma using eight microsatellite DNA (msDNA) markers to provide the scientific data for the preservation and management of the Pollock fishery resource. The results of the analysis of 186 individuals of the Pollock revealed a range of 7.13-10.63 numbers of alleles (mean number of alleles=9.05). The means of observed heterozygosity ($H_O$), expected heterozygosity ($H_E$) were 0.732 and 0.698, respectively. The results of genetic distance, Pairwise $F_{ST}$, UPGMA (UPGMA: un-weighted pair-group method with an arithmetical average) (the phylogenetic tree), PCA (PCA: Principal Coordinate analysis) analysis pointed to significant differences between the Korean population, Russian population, USA population, and Japanese populations, although small (p<0.05). These results shed light on the genetic diversity and relationships of T. chalcogramma and can be utilized for research on the evaluation and conservation of Korean T. chalcogramma as genetic resources.

• Korean Journal of Animal Reproduction
• /
• v.23 no.4
• /
• pp.293-301
• /
• 1999

This study was to examine whether Hanwoo IVM/IVF/IVC blastocyst can be successfully survived in vitro/in vivo after vitrification and one-step dilution. For vitrification, blastocysts were serially exposed in glycerol (G) and ethylene glycol(EG) mixtures［10% (v Iv) G for 5 min., 10% G plus 20% EG (v/v) for 5 min., and 25% G plus 25% EG (v/v) for 30 sec.］ which is diluted in 10% FBS added D-PBS. And then they were loaded in the straw, placed in cold nitrogen vapor for 3 min. and plunged into L$N_2$(－196$^{\circ}C$). One-step dilution within the straw was done in $25^{\circ}C$ and 36$^{\circ}C$ water for about 5 min. and 3 min., respectively. Recovered embryos after one-step dilution were cultured in cumulus cell mono-layered drop for 48 h or were transferred into recipient cows. When the embryo survival in vitro was assessed to re-expanded and hatched rates at 24 hand 48 h after one-step dilution, the results of vitrified group (85.4, 43.8%) was high, although these results were significantly lower than normal development (100.0, 63.3%) of control group, respectively (P＜0.001, P＜0.05). When in vitro survival of vitrified groups according to developmental stage was compared, the results of fast developed embryos (expanded blastocyst and early hatching blastocyst stage) were significantly higher than those of delayed developed one (early blastocyst stage) after one-step dilution (early hatching: 88.0, 48.0%: expanded: 81.1, 45.3%; early: 66.7, 14.3%) (P＜0.05). Also, in case of in vitro survival of vitrified groups according to embryo age (day 7, 8 and 9), when embryo age was younger, in vitro survival was significantly higher (day 7: 67.3, 34.5%; day 8: 76.9, 40.7%; day 9: 60.9, 23.9%)(P＜0.05). Finally, when in vivo development potential of vitrified and one-step diluted Hanwoo blastocysts was examined, 4 of 8 recipient (50%) cows became confirmed pregnant. These results demonstrated that our vitrification and one-step dilution technique can be applied easily and effectively on field trial without the equipment and embryological skills required for conservative dilution and transfer.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.1
• /
• pp.48-57
• /
• 2015

In a sodium-cooled fast reactor, which is a Generation-IV reactor, refueling is conducted by rotating, but not opening, the reactor head to prevent a reaction between the sodium, water and air. Therefore, an inspection technique that checks for the presence of any obstacles between the reactor core and the upper internal structure, which could disturb the rotation of the reactor head, is essential prior to the refueling of a sodium-cooled fast reactor. To this end, an ultrasound-based inspection technique should be employed because the opacity of the sodium prevents conventional optical inspection techniques from being applied to the monitoring of obstacles. In this study, a ranging inspection technique using a plate-type ultrasonic waveguide sensor was developed to monitor the presence of any obstacles between the reactor core and the upper internal structure in the opaque sodium. Because the waveguide sensor installs an ultrasonic transducer in a relatively cold region and transmits the ultrasonic waves into the hot radioactive liquid sodium through a long waveguide, it offers better reliability and is less susceptible to thermal or radiation damage. A 10 m horizontal beam waveguide sensor capable of radiating an ultrasonic wave horizontally was developed, and beam profile measurements and basic experiments were carried out to investigate the characteristics of the developed sensor. The beam width and propagation distance of the ultrasonic wave radiated from the sensor were assessed based on the experimental results. Finally, a feasibility test using cylindrical targets (corresponding to the shape of possible obstacles) was also conducted to evaluate the applicability of the developed ranging inspection technique to actual applications.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.118-131
• /
• 1982

1. In order to investigate the effect of variation of assembly time on glue bond strength, and to determine the optimum range of assembly time with given glue, this experiment was made at the suggestion of the Wood Technology Laboratory, School of Forestry, Yale University. 2. For this investigation, three-ply-plywoods with 1/22 inch, birch veneer, phenolic resin, and soybean glue were made at the following variation of assembly time, that is, 1, 5, 10, 25, 35, 50, and 70 minutes, under both open and closed assembly manners, and the shear strength test at dry and wet were adoptted. 3. The shear strength and wood failure of each plywood panel constructed at the given assembly time have been illustrated in Tables 1, 2, 3 and 4. It has shown that there is a remarkable tendency, for increasing assembly time to give lower shear strength and wood failure throughout almost all cases. The effective range of assembly time of tested glues in this investigation for both open and closed assembly are summarized in the Table 7. Thus, allowable assembly time for Phenolic resin may be up to 10 minutes under open assembly and up to 50 minutes under closed assembly. For soybean glue, the permissible assembly time may be up to 5 minutes under open assembly and up to 15 minutes under closed assembly. The allowable assembly time for open assembly with the same glue is reduced by approximately one third or more than one third as compared with closed assembly time. This might mean that the closed asembly time for these glues is more practical than the open assembly.

• the MEAT Journal
• /
• s.34 winter
• /
• pp.14-25
• /
• 2007

The objective of this study was to investigate the physicochemical, microbiological and sensory properties of food additive-free grilled pork products manufactured using loin (T1), tender loin (T2) and ham (T3). The samples were heated for 30 min at $60^\circC$, and then 50 min for $150^\circC$. After cooling, vacuum packaged grilled pork samples was stored at $4\pm$$1^\circC$ for 40 days. The pH values of grilled pork samples ranged from 5.92 (T1) to 6.10 (T3) at the initial storage time, and from 6.28 (T1) to 6.60 (T3) after 40 days. The water holding capacities (%) was 85.99~93.24% for T1, 85.26~93.89% for T2 and 89.11~94.67% for T3, all of which were slightly higher than those of other pork products. The shear force values of T2 were significantly higher (p<0.05) than those of the other pork products throughout the storage period. The TBARS and VBN values of T2 were significantly higher (p<0.05) than those of T1 and T3. With regard to microorganisms, all grilled pork samples was in good condition, showing 1.93~3.48 log10 CFU/g via total plate counts, and 1.74~3.48 log10 CFU/g for lactic acid bacteria throughout the storage period. Regarding sensory evaluation, the scores of overall acceptability in all products were above 5.0 points through 40 days of storage.

• Research in Plant Disease
• /
• v.10 no.3
• /
• pp.188-193
• /
• 2004

The symptom expressions such as yellowish and mosaic spots in overwintering barley have been considered to be a damage by cold or water. However, it had revealed that the symptom expressions were caused by viruses throughout three year nationwide surveys. Barley yellow mosaic virus (BaYMV), Barley mild mosaic virus (BaMMV), and Soil-borne wheat mosaic virus (SBWMV) was detected in 2001-2003 and Barley yellow dwarf virus-MA V (BYDV -MA V) from field samples collected on March in 2003. The results of investigation showed that the incidence of BaYMV was more than 70％ and that of BaMMV and SBWMV was 15.7-37.4％ and 0.7-10.1 ％ in three year surveys, respectively. The incidence of BYDV-MAV was approximately 1 ％ in 2003 only. The distribution of BaYMV was relatively uniform throughout barley fields in Korea, but the incidence of the virus in Gyunggi Province was as low as 19％ compared to 65-85％ in the rest of regions. On the other hand, 70％ of BaMMV was found to be in the west south regions of Korea, Jeonbuk and Jeonnam Provinces. Taken together, both BaYMV and BaMMV were thought to be dominant casual agents in overwintering barley by either single or mixed infections. Previous survey data for BaYMV from 1994 to 1996 indicated that the incidence of the virus was approximately 40％ in Jeonbuk, Jeonnam, and Gyungnam Provinces. Thus, comparing with the results from the recent nationwide survey, the incidence of BaYMV had been rapidly increasing in overwintering barley fields in the southern part of Korea.

• The Journal of Engineering Geology
• /
• v.25 no.1
• /
• pp.93-102
• /
• 2015

The characteristics of frozen soils are one of most important factors for foundation design in cold region. The objective of this study is to evaluate the shear strength and stiffness of frozen soils according to the confining conditions during the freezing and shearing phase. A direct shear box is constructed for the frozen specimens and bender elements are mounted on the wall of the shear box to measure shear wave velocities. Specimens are prepared by mixing sand and silt with a silt fraction of 30% in weight and the degree of saturation of 10%, giving a relative density of 60% for all tests. The temperature of the specimens in the freezer is allowed to fall below -5℃, and then direct shear tests are performed. A series of vertical stresses are applied during the freezing and shearing phase. Shear stress, vertical displacement, and shear wave along the horizontal displacement are measured. Experimental results show that in all the tests, shear strength increases with increasing vertical stress applied during the freezing and shearing phases. The magnitude of the increase in shear strength with increasing vertical stress during shearing under fixed vertical stress in the frozen state is smaller than the magnitude of the increase in vertical stress during freezing and shearing. In addition, the change in shear wave velocities varies with the position of the bender elements. In the case of shear waves passing through the shear plane, the shear wave velocities decrease with increasing horizontal displacement. This study provides an evaluation of the properties of shear strength and stiffness of frozen soils under varied confining condition.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.2
• /
• pp.278-287
• /
• 1998

Carotenoids in integument of wild manchurian trout, Brachymystax lenok, and wild and cultured masu salmon Oncohynchus macrostomus, which are all the Korean native cold fresh water fish, were investigated by thin layer chromatography, column chromatography and HPLC. The total carotenoid contents of the wild manchurian trout were $3.72\;mg\%$ which is relatively higher compare to other species of salmonidae. The carotenoids were composed of $36.9\%$ zeaxanthin and $14.7\%$ $\beta-carotene$ as the major compounds, $7.8\%$ triol $7.3\%$ isocryptoxanthin, $5.7\%$ 4-hydroxy echinenone, $4.7\%$ lutein, $4.5\%$ salmoxanthin and $2.2\%$ astaxanthin as minor compounds, and other carotenoids such as canthaxanthin, tunaxanthin A, tunaxanthin B, tunaxanthin C, $\beta-cryptoxanthin$ and $\alpha-cryptoxanthin$ as minute carotenoids. Wild masu salmon contained more total carotenoids than cultured one and the contents were $0.82\;mg\%$ and $0.66\;mg\%$, respectively. The composition of the carotenoids from wild masu salmon were $20.7\%$ xeaxanthin, $17.0\%$ isocryptoxanthin and $15.8\%\;\beta-carotene$ as major compounds, and $6.2\%$ triol, $6.1\%$ 4-hydroxy echinenone, $6.1\%$ salmoxanthin, $5.9\%$ canthaxanthin, $5.8\%$ lutein, $4.9\%$ $\alpha-cryptoxanthin$ and $1.0\%$ astaxanthin as minor compounds. The composition of the carotenoids from cultured masu salmon were $19.7\%$ isocryptoxanthin, $18.0\%$ $\beta-carotene$ and $10.3\%$ zeaxanthin as the major compounds, and $8.9\%\;\beta-cryptoxanthin$, $8.5\%\;\alpha-cryptoxanthin$, $8.0\%$ lutein, $7.6\%$ canthaxanthin, $5.1\%$ triol and $2.0\%$ astaxanthin as minor carotenoids. Based on these data, wild masu salmon contained more zeaxanthin, salmoxanthin and 4-hydroxy echinenone while cultured masu salmon contained more $\alpha-cryptoxanthin$, indicating that carotenoid pigment of masu salmon depends on their living conditions. Unlike wild masu salmon, 4-hydroxy echinenone and salmoxanthin which are the characteristic carotenoids of salmons, were not found in the integument of cultured masu salmon. Unlike manchurian trout, both wild and cultured masu salmon did not contain tunaxanthin A, tunaxanthin B and tunaxanthin C.