• Steel and Composite Structures
• /
• 제10권3호
• /
• pp.261-279
• /
• 2010

Generally, a box tube, which is used for an existing square CFT structure, is made by welding four plates. The manufacturing efficiency of this steel tube is poor, and it also needs special welding technology to weld its internal diaphragm and the through diaphragm. Therefore, an interior-anchor-type square steel tube was developed using the method of cold-forming thin plates to prevent welding of the stress concentration position, and to maximize the section efficiency. And, considering of the flow of beam flange load, the efficiency of erection and the weldability of the diaphragm to thin walled steel column, the external diaphragm connection was selected as the suitable type for the welded built-up square CFT column to beam connection. And, an analytical study and tests were conducted to evaluate the structural performance of the suggested connection details and to verify the suggested equations for the connection details. Through this study, the composite effect of the internal anchor to concrete, the resistance and stress distribution of the connections before and after the existing column is welded to the beam, the effective location of welding in connection were analyzed.

• 천문학회보
• /
• 제37권2호
• /
• pp.71.1-71.1
• /
• 2012

We have identified local analogs of strong $H{\alpha}$ Emitters (HAEs) that dominate the z~4 Lyman-break galaxy population using the Sloan Digital Sky Survey (SDSS). At z<0.4, only 0.04% of galaxies are classified as HAEs with $H{\alpha}$ equivalent width larger than $500{\AA}$, comparable to that of z~4 HAEs. The $H{\alpha}$-to-UV luminosity ratio of local HAEs is consistent with that of z~4 HAEs, indicating relatively large specific star formation rate in these galaxies compared to traditionally studied UV-selected Lyman break analogs. Local HAEs are young, less evolved galaxies with low metallicity. It is still difficult to constrain whether the star formation in local HAEs is powered by minor mergers or by cosmological cold gas accretion. However, the stacked optical spectrum of local HAEs shows several strong ionization lines, for example HeII 4686 emission line, which are shown in Wolf-Rayet galaxies. Thus it is highly likely that local HAEs are galaxies with an elevated ionization parameter, either due to a high electron density or large escape fraction of hydrogen ionizing photons.

• 천문학회보
• /
• 제36권1호
• /
• pp.82.2-82.2
• /
• 2011

Infra-Red Dark Clouds (IRDCs) seen silhouette against the bright Galactic background in mid-IR are a class of interstellar clouds that are dense and cold with very high column densities. While IRDCs are believed to be the precursors to massive stars and star clusters, individual IRDCs show diverse star forming activities within them. We report a remarkable example of such cloud, the IRDC at ${\Gamma}53.2^{\circ}$, and star formation activity in this cloud. The IRDC was previously identified in part as three separate, arcmin-size clouds in the catalogue of MSX IRDC candidates, but we found that the IRDC is associated with a long, filamentary CO cloud at 2 kpc from the Galactic Ring Survey data of $^{13}CO$ J = 1-0 emission, and that its total extent reaches ~ 30pc. The Spitzer MIPSGAL 24mm data show a number of reddened mid-IR sources distributed along the IRDC which are probably young stellar objects (YSOs), and the UWISH2 $H_2$ data (2.122mm) reveal ubiquitous out flows around them. These observations indicate that the IRDC is a site of active star formation with YSOs in various evolutionary stages. In order to investigate the nature of mid-IR sources, we have performed photometry of MIPSGAL data, and we present a catalogue of YSOs combining other available point source catalogues from optical to IR. We discuss the evolutionary stages and characteristics of YSOs from their IR colors and spectral energy distributions.

• 한국정밀공학회지
• /
• 제21권7호
• /
• pp.136-144
• /
• 2004

Optimal process and system to produce the laser welded tube for one body formed bumper beam are studied. The calculated size of tube is a thickness of 1.4mm, diameter of 105.4mm and length of 2000mm. The tube is shaped from a cold rolled high strength steel sheet(tensile strength: 60kgf/$\textrm{mm}^2$ grade). Two roll bending method is the optimal tube shaping process compared to UO-bending, bending on press brake, multi-step continuous roll forming and 3 roll bending methods. Weld quality monitoring and seam tracking along the butt-joint lengthwise to the tube axis are also studied. The longitudinal butt-joint is welded by the $CO_2$ laser welding system equipped with a seam tracker and plasma sensor. The constructed $CO_2$laser tube welding system can be used for the precision seam tracking and the real-time monitoring of weld quality. Finally, the obtained laser welded tube can be used for one-body formed automobile bumper beam.

• 수산해양기술연구
• /
• 제30권1호
• /
• pp.53-63
• /
• 1994

1) 강소성 유한 요소법 프로그램 RDHPSC는 2단헤딩 가공에 있어서의 신뢰 할 수 있는 해석수단이다. 2) RDHPSC에 의한 2단헤딩의 해석은 2단헤딩가공에서의 최적 가공 조건의 결정에 유용한 정보를 제공할 수 있다. 3) 2단헤딩 가공중의 금속흐름을 수치해석에서의 격자 변형에 의해 관찰될 수 있다. 4) 2단헤딩 가공중의 표면 결함의 발생가능성은 수치해석 결과에서 원수방향응력과 계수 D를 관찰함으로서 탐색되어질 수 있다. 5) 2단헤딩가공중에 있어서의 내부결함 발생가능성은 수치해석의 격차 변형을 통하여 알 수 있다. 6) 마무리 가공금형 수명에 대한 최적가공조건은 수치해석에서의 접촉압력을 조사하여 얻을 수 있다.(이 논문의 결론부분임)

• 한국지형학회지
• /
• 제23권2호
• /
• pp.15-27
• /
• 2016

Since restoration of damaged geomorphological sites is almost impossible, it is necessary, to select and conserve geomorphological heritages in a preemptive action. Algific (=producing cold) sites are one of the natural resources which have not been protected well due to the lack of understanding of their value, despite their conservation importance. This research aimed to help people to recognize such geosites' actual value and make them understand the necessity of protecting these sites. Algific areas are valuable by the simple fact that it is a mysterious phenomenon in which the ice forming may happen even in the mid-summer and the environment is always cool. Algific sites deserve geomorphological research in the sense that topographic condition called talus causes this phenomenon. They are also valuable in plant geographic sense because northern rare plants survive isolatedly due to low-temperature environment of these sites. Their cultural-historical value is also high by the fact that they have been connected closely with local residents' lives shown by its nicknames, "natural refrigerator" or "natural air conditioner".

• Design & Manufacturing
• /
• 제12권3호
• /
• pp.60-65
• /
• 2018

The production of the automotive parts with the ultra high strength steel usually involves large amount of springback as well as fracture during the cold stamping process. Variable blank holding force(VBHF) can be used as one of the effective process parameters to reduce the springback amount with achieving better condition of formability. In this paper, VBHF with respect to the punch stroke is applied to the stamping process of the front side rear lower member for reducing the springback amount. From the analyses with constant blank holding force(CBHF), 24 kinds of VBHF conditions are utilized to investigate the springback tendency. It is noted that springback can be effectively reduced when BHF is increased near the bottom dead center because VBHF provides the tensile force to the blank with an adequate level of deformation without fracture.

• Structural Engineering and Mechanics
• /
• 제70권4호
• /
• pp.431-443
• /
• 2019

The present paper illustrates a numerical investigation on the failure behaviour of ring-stiffened cylinder subjected to external hydrostatic pressure. The published test data of steel welded ring-stiffened cylinder are surveyed and collected. Eight test models are chosen for the verification of the modelling and FE analyses procedures. The imperfection as the consequences of the fabrication processes, such as initial geometric deformation and residual stresses due to welding and cold forming, which reduced the ultimate strength, are simulated. The results show that the collapse pressure and failure mode predicted by the nonlinear FE analyses agree acceptably with the experimental results. In addition, the failure mode parameter obtained from the characteristic pressure such as interframe buckling pressure known as local buckling pressure, overall buckling pressure, and yield pressure are also examined through the collected data and shows a good correlation. A parametric study is then conducted to confirm the failure progression as the basic parameters such as the shell radius, thickness, overall length of the compartment, and stiffener spacing are varied.

• Steel and Composite Structures
• /
• 제49권1호
• /
• pp.19-30
• /
• 2023

Steel-concrete composite slabs represent a very efficient floor solution combining the key performance of two different materials: the steel and the concrete. Composite slab response is governed by the degree of the interaction between these two materials, mainly depending by chemical and mechanical bond. The latter is characterized by a limited degree of confinement if compared with the one of the rebars in reinforced concrete members while the former is remarkably influenced by the type of concrete and the roughness of the profiled surface, frequently lubricated during the cold-forming manufacturing processes. Indeed, owing to the impossibility to guarantee a full interaction between the two materials, a key parameter governing slab design is represented by the horizontal shear-bond strength, which should be always experimentally estimated. According to EC4, the design of the slab bending resistance, is based on the simplified assumption that the decking sheet is totally yielded, i.e., always in plastic range, despite experimental and numerical researches demonstrate that a large part of the steel deck resists in elastic range when longitudinal shear collapse is achieved. In the paper, the limit strain for composite slab, which corresponds to the slip, i.e., the debonding between the two materials, has been appraised by means of a refined numerical method used for the simulation of experimental results obtained on 8 different composite slab types. In total, 71 specimens have been considered, differing for the properties of the materials, cross-section of the trapezoidal profiled metal sheets and specimen lengths.

• 문화기술의 융합
• /
• 제9권5호
• /
• pp.815-819
• /
• 2023

현재 중국의 도시 공간은 점진적인 개발에서 재고 변형으로 점차 변화하고 있다. 도시 공동체의 계획 개발 목표도 물질적 공간 건설에서 인문 사회의 지속 가능한 발전 방향으로 전환되었다. 현재 주거생활에 중점을 둔 단일 위도의 지역사회 계획 및 건설은 지역사회 생활 생산의 다차원적 요소를 간과하여 지역사회 간의 냉담한 관계, 인간과 환경 간의 관계 형성 어려움 등 많은 문제를 초래한다. 따라서 이 글은 지역사회의 시공간적 연속적 통일에서 지역사회의 사회성을 재인식하고, 지역사회의 중앙과 민간의 여양 명확히 하며, 일상생활의 시작점으로 하여 지역사회의 역동적인 조성 방법과 방법을 재탐색한다.