• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.6
• /
• pp.645-655
• /
• 1997

In this paper, the performance of the noncoherent code tracking loop designed at baseband for CDMA applications is analyzed in detail and is confirmed by computer simulations. Analytical closed-form formula for jitter variance is derived for AWGN channel environments as a function of pulse shaping filter, timing offset, signal-to-interference ratio, and loop filter coefficients. The design issue of the loop filter is also addressed with emphasis on the second-order tracking loop. Finally, the performance of the designed tracking loop is examined by computer simulations for both AWGN and Rayleigh fading channels, when applied to the reverse link of the coherent CDMA system for IMT-2000 designed by ETRI.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.2035-2042
• /
• 1997

We consider the design of soft decision functions for each stage of multistage detection for coherent demodulation in an asynchronous code-division multiple-access(CDMA) system. In particular, the sigmoid function, which is shown to be optimal under the mean square error(MSE) criterion, andmultilevel quantizers that best approximate the sigmoid function are derived. At each stage of multistage detection, the parameters of these decision functions are adjusted depending on estimated input statistics. Computer simulation results demonstrate that multistage detectors employing these soft decision functions perform considerably better than those with hard decision.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.4
• /
• pp.35-43
• /
• 1998

This study has been experimented the characteristics of synchronous oscillator for clock recovery of Direct Sequence/Spread Spectrum(DS/SS) communication. When external wave is not provided, The Synchronous Oscillator(SO) oscillates at its natural frequency. As soon as external signal is applied, the SO starts tracking the external frequency which can be sinusoidal, pulsed or some other waveform. Thus, the output is synchronized with the range of wide tracking bandwidth to the external frequency Specifically, the SO also posses frequency division and multiplication capability. All of these indicate that the SO can overcome difficulties to get synchronization in coherent digital communication systems. We make a practical application of DS/SS communication with study on the synchronous properties of SO. As the result, we have a good performance.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.11 no.2
• /
• pp.33-42
• /
• 2003

In this paper, we propose an enhancement of the ultrasonic image for non-destructive inspection of aircraft composite materials. The ultrasonic images are corrupted by a speckle noise which has the characteristic of granular pattern noise and is in all types of coherent imaging systems, the signal independent and multiplicative noise. In this paper, we derive a filter, called the AWLF(Adaptive Window Log Filter), from the nature of the speckle. The filter is made of the MEAN Filter in the edge region and Log Filter in the flat or noise region. To make a distinction between edge and flat region, we calculate the inclination around the local window instead of computing the local statistics of pixels such as local mean ${\bar{M}}$ and standard deviation ${\sigma}_s$. According to the obtained region, edge region is performed by the mean filter and flat region by the Log filter. Performance of the proposed filter is evaluated by the Enhanced Factor$(F_e)$ and the Speckle Index(SI).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.123-129
• /
• 2010

In this paper, we analyze the code tracking biases of single and double early-minus-late processing schemes which are widely used code tracking method for global navigation satellite systems. The code tracking bias which results from the distortion in symmetry of correlation values is arisen in the presence of multipath signals. To analyze them, two civil signals which are spreading signals modulated by binary phase shift keying and binary offset carrier are considered.

• Journal of Computing Science and Engineering
• /
• v.1 no.2
• /
• pp.125-160
• /
• 2007

Data Warehousing and OLAP (On-Line Analytical Processing) have turned into the key technology for comprehensive data analysis. Originally developed for the needs of decision support in business, data warehouses have proven to be an adequate solution for a variety of non-business applications and domains, such as government, research, and medicine. Analytical power of the OLAP technology comes from its underlying multidimensional data model, which allows users to see data from different perspectives. However, this model displays a number of deficiencies when applied to non-conventional scenarios and analysis tasks. This paper presents an attempt to systematically summarize various extensions of the original multidimensional data model that have been proposed by researchers and practitioners in the recent years. Presented concepts are arranged into a formal classification consisting of fact types, factual and fact-dimensional relationships, and dimension types, supplied with explanatory examples from real-world usage scenarios. Both the static elements of the model, such as types of fact and dimension hierarchy schemes, and dynamic features, such as support for advanced operators and derived elements. We also propose a semantically rich graphical notation called X-DFM that extends the popular Dimensional Fact Model by refining and modifying the set of constructs as to make it coherent with the formal model. An evaluation of our framework against a set of common modeling requirements summarizes the contribution.

• Korean Journal of Materials Research
• /
• v.15 no.9
• /
• pp.566-576
• /
• 2005

This paper describes an ab Initio study on interface energies, misfit strain energies, and electron structures at coherent interfaces Fe(bcc structure)/MCs(NaCl structure M=Ti, Zr, Hf). The interface energies at relaxed interfaces Fe/TiC, Fe/ZrC and Fe/HfC were 0.263, 0.153 and $0.271 J/m^2$, respectively. It was understood that the dependence of interface energy on the type of carbide was closely related to changes of the binding energies between Fe, M and C atoms before and after formation of the interfaces Fe/MCs with the help of the DLP/NNBB (Discrete Lattice Plane/ Nearest Neighbour Broken Bond) model and data of the electron structures. The misfit strain energies in Fe/TiC, Fe/ZrC and Fe/HfC systems were 0.390, 1.692 and 1.408 eV per 16 atoms(Fe: 8 atoms and MC; 8 atoms). More misfit energy was generated as difference of lattice parameters between the bulk Fe and the bulk MCs increased.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.9-20
• /
• 2021

Abstraction applied in computer networking hides network details behind a well-defined representation by building a model that captures an essential aspect of the network system. Two current methods of representation are available, one based on graph theory, where a network node is reduced to a point in a graph, and the other the use of non-methodological iconic depictions such as human heads, walls, towers or computer racks. In this paper, we adopt an abstract representation methodology, the thinging machine (TM), proposed in software engineering to model computer networks. TM defines a single coherent network architecture and topology that is constituted from only five generic actions with two types of arrows. Without loss of generality, this paper applies TM to model the area of network monitoring in packet-mode transmission. Complex network documents are difficult to maintain and are not guaranteed to mirror actual situations. Network monitoring is constant monitoring for and alerting of malfunctions, failures, stoppages or suspicious activities in a network system. Current monitoring systems are built on ad hoc descriptions that lack systemization. The TM model of monitoring presents a theoretical foundation integrated with events and behavior descriptions. To investigate TM modeling's feasibility, we apply it to an existing computer network in a Kuwaiti enterprise to create an integrated network system that includes hardware, software and communication facilities. The final specifications point to TM modeling's viability in the computer networking field.

• Nuclear Engineering and Technology
• /
• v.50 no.8
• /
• pp.1306-1313
• /
• 2018

The randomness and incipient nature of certain faults in reactor systems warrant a robust and dynamic detection mechanism. Existing models and methods for fault diagnosis using different mathematical/statistical inferences lack incipient and novel faults detection capability. To this end, we propose a fault diagnosis method that utilizes the flexibility of data-driven Support Vector Machine (SVM) for component-level fault diagnosis. The technique integrates separately-built, separately-trained, specialized SVM modules capable of component-level fault diagnosis into a coherent intelligent system, with each SVM module monitoring sub-units of the reactor coolant system. To evaluate the model, marginal faults selected from the failure mode and effect analysis (FMEA) are simulated in the steam generator and pressure boundary of the Chinese CNP300 PWR (Qinshan I NPP) reactor coolant system, using a best-estimate thermal-hydraulic code, RELAP5/SCDAP Mod4.0. Multiclass SVM model is trained with component level parameters that represent the steady state and selected faults in the components. For optimization purposes, we considered and compared the performances of different multiclass models in MATLAB, using different coding matrices, as well as different kernel functions on the representative data derived from the simulation of Qinshan I NPP. An optimum predictive model - the Error Correcting Output Code (ECOC) with TenaryComplete coding matrix - was obtained from experiments, and utilized to diagnose the incipient faults. Some of the important diagnostic results and heuristic model evaluation methods are presented in this paper.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.459-468
• /
• 2007

The u-City construction project has become a hot topic in the construction market because it seems economic value-added field for construction firms. However, construction firms don't willingly participate in the u-City construction market because environments of the future business for the u-City are very uncertain. Scenario planning is a very powerful method in managing this uncertain planning situation and is based on scenarios that help each enterprise appropriately adapt itself to its own business environments. Therefore it is based on the main principles of systems thinking and multiple futures. For the purpose of dealing with such uncertainties, this paper attempts to develop the possible market scenarios of the u-City construction market in S.Korea through a scenario planning approach. From this perspective, we considered various aspects of the u-City construction such as market demands, technology development, policy level and management environment. After considering the relevant issues, we identified the main trends and key uncertainties. Finally, we developed three coherent u-City construction market scenarios. Construction firms can use these scenarios as a basic reference for market analysis and business strategy. Therefore, this paper is able to enhance the participation of construction firms in the u-City construction market.