• 한국지반공학회논문집
• /
• 제33권12호
• /
• pp.21-33
• /
• 2017

본 연구에서는 항타시공성(BPM, blow per meter)을 고려하여 대구경 항타강관말뚝을 시공하였을 때 발생하는 폐색효과를 분석하였다. Coupled Eulerian-Lagrangian(CEL)해석 시 적용된 항타에너지는 파동방정식을 이용하여 산정하였고, CEL 대변형 3차원 유한요소 해석을 수행하여 말뚝 항타시공 과정을 모사하였다. 본 연구 결과, 말뚝 직경이 증가함에 따라 목표 깊이까지 소요되는 항타에너지는 증가(일정한 BPM인 경우에 해당함) 하였으며, 그 결과 soil plugging index(SPI)는 서로 유사하게 나타나지만 폐색효과는 감소함을 알 수 있었다. 또한, 말뚝의 근입 깊이가 증가할수록 SPI는 서로 유사한 값을 나타냈으나 관내토에서 발생하는 수평토압이 증가하게 되어 폐색효과는 오히려 증가하는 것으로 나타났다. 본 연구결과, 폐색효과의 대표적 영향인자인 말뚝 직경, 말뚝 근입 깊이, 지반 탄성계수, BPM에 따른 관내토의 수평토압계수 분포 경향을 제안하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.435-440
• /
• 2000

It is important to pay careful attention to construction backfill for the structural integrity of concrete box culvert. The stability of the surrounding soil is important to the structural performance of most culverts. Good compaction by the dynamic compaction roller with big capacity is as effective as good backfill materials to increase the structural integrity of culvert. However structural distress of the culvert could be occur due to the excessive earth pressure by dynamic compaction load. In this study, 16 box culverts were constructed with various compaction materials and construction methods. Three types of on-site soils such as subbase, subgrade and roadbed materials were used as backfill materials in the test program. Compaction methods were adapted based on the site conditions. In most cases, dynamic compaction rollers with 10 to 16 ton weights were used and vibration speed were applied from 2400 to 2500 rpm for the great compaction energy. Some backfill compactions with good quality soils were carried out to examine the effect of EPS(Expanded Polystyrene) panels with changes of compaction thickness. This paper presents the main results of the research conducted to access the engineering performance of the backfill materials. The characteristics of earth pressures are discussed. It is observed that subgrade and roadbed materials are needed more careful compaction than subbase materials. It is shown that EPS panels are effective to mitigate dynamic lateral earth pressure on the culverts. It is also obtained that the dynamic pressure depends on the soil properties. In addition, the coefficient of dynamic earth pressure (K$\sub$dyn/=ΔP$\sub$H/ ΔP$\sub$V/) during compaction is discussed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.703-710
• /
• 2002

In the design of cut and cover tunnels, the structural analysis has been used for its simplicity. Contrarily to the geotechnical analysis, this technique could not account for the geological and geometric factors. In this study, the dominant factors influencing the behavior of cut and cover tunnel such as interface element, cut slope, distance between cut slope and tunnel lining, berm, coefficient of lateral earth pressure, were investigated and compared by geotechnical numerical analysis. Based on the results, the variations of earth pressure, bending moment, shear stress, axial load, and displacements were evaluated and analyzed for each factor.

• Geomechanics and Engineering
• /
• 제32권1호
• /
• pp.97-110
• /
• 2023

The coefficient of lateral earth pressure at rest in loose sand during virgin loading, K₀ , and during unloading, K'₀ , have been determined from laterally confined load-unload tests. The tests included measurement of lateral pressure with null pressure gauges, side wall friction with newly designed friction meters and applied pressure and base pressure with load cells. The importance of accounting for side-wall friction when evaluating the distribution of vertical pressure over the height of the soil specimen was demonstrated. Relatively uniform friction was observed during loading, but this was not the case during unloading unless friction reduction measures were employed. While the measured value of K₀ was found to be close to, if slightly higher than the value commonly estimated on the basis of friction angle, φ', the ratio of K'₀ to K₀ was found to reasonably fit an expression of the form K'₀/K₀ = 1 + C·log(OCR), with C equal to 1 in the present tests.

• Geomechanics and Engineering
• /
• 제23권1호
• /
• pp.71-83
• /
• 2020

Cantilever sheet pile walls are subjected to surcharge loading located on the backfill soil and at different distances from the top of the wall. The response of cantilever sheet pile walls to surcharge loadings at varying distances under seismic conditions is scarce in literature. In the present study, the influence of uniform surcharge load on cantilever sheet pile wall at varying distances from the top of the wall under seismic conditions are analyzed using finite difference based computer program. The results of the numerical analysis are presented in non-dimensional form like variation of bending moment and horizontal earth pressure along the depth of the sheet pile walls. The numerical analysis has been conducted at different magnitudes of horizontal seismic acceleration coefficient and vertical seismic acceleration coefficients by varying the magnitude and position of uniform surcharge from the top of the wall for different embedded depths and types of soil. The parametric study is conducted with different embedded depth of sheet pile walls, magnitude of surcharge on the top of the wall and at a distance from the top of the wall for different angles of internal friction. It is observed that the maximum bending moment increases and more mobilization of earth pressure takes place with increase in horizontal seismic acceleration coefficients, magnitude of uniform surcharge, embedded depth and decrease in the distance of surcharge from the top of the wall in loose sand.

• 한국산림과학회지
• /
• 제17권1호
• /
• pp.29-34
• /
• 1973

$C_{\small{OULOMB}}$과 $R_{\small{ANKINE}}$의 토압론(土壓論)에 기초(基礎)하여 중력식구조물(重力式構造物)이나 deflection 성구조물(性構造物)에 흔히 발생(發生)한 B형변위(型變位)에 대하여 연구고찰(硏究考察)함으로써 식(式) $$E=1/2\;H^2\frac{sin(u-{\varepsilon})cos({\alpha}+{\varepsilon})}{cos(u+{\alpha})}{\cdot}cot(u+{\rho})$$을 얻었는데 이식(式)은 토압재분배(土壓再分配)를 고찰(考察)한 식(式)이므로 실용도(實用度)가 높으리라 생각되며 본식(本式)에 의(依)하여 다음과 같은 결론(結論)을 얻었다. 1. 토압(土壓)은 벽고(壁高)의 자승(自乘)에 직비례(直比例)한다. 2. 토압(土壓)은 지표(地表)의 경사도(傾斜度)에 정비례(正比例)하며 벽체(壁體)의 변위(變位)에 반비례(反比例)한다. 3. 토압선도(土壓線圖)는 이차포물선(二次抛物線)으로 분포(分布)한다(그림 5의 b). 4. 토압강도(土壓强度)는 정수압적분포(靜水壓的分布)를 한다(그림 5의 c).

• 한국지반공학회논문집
• /
• 제17권6호
• /
• pp.163-171
• /
• 2001

콘크리트 구조물과 토공의 인접부인 구조물 뒷채움의 구조적 연속성을 위해서는 뒷채움 시공이 중요하다. 뒷채움부의 구조적 연속성을 증가시키기 위해서는 양질의 뒷채움재 사용과 대형 진동다짐장비에 의한 정밀다짐이 효과적이다. 그러나 정밀다짐시에 발생하는 과도한 토압에 의해 암거 구조물에 구조적 결함이 발생할 수 있다. 본 연구에서는 다짐재와 다짐방법을 변화시키면서 2개소의 암거를 건설하였다. 뒷채움재로는 선택층재와 노상토재를 사용하였다. 뒷채움 다짐시에 큰 다짐에너지를 얻기 위하여 대부분의 경우 총중량 11~12톤의 다짐롤러를 2000rpm 에서 2400rpm의 주파수로 적용하였다. 노상토를 사용하여 뒷채움 시공을 하는 경우에는 충격완화재를 설치하여 동적 수평하중에 미치는 영향을 분석하였다. 충격완화재로는 EPS재와 타이어 칩을 사용한 패널들을 사용하였으며, 뒷채움 시공시에 이들 충격완화재를 암거의 외벽체에 부탁하였다. 본 논문에서는 콘크리트 암거의 뒷채움 시공시에 발생하는 동적지응력 특성을 기술하였다. 계측 결과, 다짐하중에 의한 수직토압과 수평토압의 크기는 다짐재료, 다짐 측정깊이 및 다짐방법에 의존하고 있었다. 뒷채움 다짐시에는 정적토압계수 보다 큰 동적토압계수$(\DeltaK_{dyn}=\DeltaK\sigma_h\DeltaK\sigma_v)$를 나타내고 있어 동적토압에 의해 암거에 유해한 영향을 줄 수 있다. 충격완화재 EPS(t=10cm)와 고무계(t=5cm)는 암거 벽체에 작용하는 동적 수평토압을 경감시키는데 효과적인 것을 알았다.

• 한국지반공학회논문집
• /
• 제31권1호
• /
• pp.25-35
• /
• 2015

서남해안 지역의 중간조밀한 실트질모래 지반에서 버켓기초 스커트벽체의 압입저항력을 원심모형실험을 통하여 분석하였다. 압입저항력은 석션을 작용하지 않고 버켓기초를 지반에 관입시킬 때 발생하는 저항력으로서 자중관입 깊이와 직접적으로 관계된다. 스커트벽체의 주면저항력에 의한 지반의 응력증가 효과를 고려하는 방법(Houlsby and Byrne, 2005) 을 기반으로 실험 결과와 유사한 압입저항력을 산정할 수 있었다. 압입저항력 산정에 이용되는 수평토압계수, 스커트 벽체와 지반간의 경계면 마찰각 등의 주요 물성값의 산정 방법에 대하여 기술하였다. 또한, 응력증가 효과의 고려 여부와 물성값의 변화가 압입저항력 산정 결과에 미치는 영향과 실험을 통해 계측된 압입시 지반거동에 대하여 분석하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1125-1131
• /
• 2008

In this study, Calibration Chamber Tests for cast-in-place piles in sand were performed for measuring behavior properties of piles. These tests were examined effects of various parameters of soil conditions including the relative density($D_R$), the coefficient of earth pressure, and investigated differences between cylindrical pile and taper-shaped pile with the same volumes. The important effect factors of foundation behavior were investigated by considering embedded depth of piles and shapes of piles, and inspected details of lateral behavior of piles. These results were verified reliabilities of each methods for comparing the results estimated with tests and the results by proposed estimating solutions in the past.

• Geomechanics and Engineering
• /
• 제24권6호
• /
• pp.531-543
• /
• 2021

Freezing and thawing of pore water within backfill can affect the stability of retaining wall as the phase change of pore water causes changes in the mechanical characteristics of backfill material. In this study, the effects of freezing and thawing on the mechanical performance of retaining wall with granular backfill were investigated for various temperature and groundwater level (GWL) conditions. The thermal and mechanical finite element analyses were performed by assigning the coefficient of lateral earth pressure according to phase change of soil for at-rest, active and passive stress states. For the at-rest condition, the mobilized lateral stress and overturning moment changed markedly during freezing and thawing. Active-state displacements for the thawed condition were larger than for the unfrozen condition whereas the effect of freezing and thawing was small for the passive condition. GWL affected significantly the lateral force and overturning moment (Mo) acting on the wall during freezing and thawing, indicating that the reduction of safety margin and wall collapse due to freezing and thawing can occur in sudden, unexpected patterns. The beneficial effect of an insulation layer between the retaining wall and the backfill in reducing the heat conduction from the wall face was also investigated and presented.