• Publications of The Korean Astronomical Society
• /
• v.21 no.2
• /
• pp.67-74
• /
• 2006

We have developed a control electronics system for an infrared detector array of KASINICS (KASI Near Infrared Camera System), which is a new ground-based instrument of the Korea Astronomy and Space science Institute (KASI). Equipped with a $512{\times}512$ InSb array (ALADDIN III Quadrant, manufactured by Raytheon) sensitive from 1 to $5{\mu}m$, KASINICS will be used at J, H, Ks, and L-bands. The controller consists of DSP(Digital Signal Processor), Bias, Clock, and Video boards which are installed on a single VME-bus backplane. TMS320C6713DSP, FPGA(Field Programmable Gate Array), and 384-MB SDRAM(Synchronous Dynamic Random Access Memory) are included in the DSP board. DSP board manages entire electronics system, generates digital clock patterns and communicates with a PC using USB 2.0 interface. The clock patterns are downloaded from a PC and stored on the FPGA. UART is used for the communication with peripherals. Video board has 4 channel ADC which converts video signal into 16-bit digital numbers. Two video boards are installed on the controller for ALADDIN array. The Bias board provides 16 dc bias voltages and the Clock board has 15 clock channels. We have also coded a DSP firmware and a test version of control software in C-language. The controller is flexible enough to operate a wide range of IR array and CCD. Operational tests of the controller have been successfully finished using a test ROIC (Read-Out Integrated Circuit).

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.322-335
• /
• 2019

Objectives: The goal of this study is to standardize industry, process, and job within work environment measurement information. Methods: We selected 180 work environment measurement reports on 30 industries from a database monitored from 2014 to 2016 by the Korea Industrial Health Association. Ten industrial hygienists, each with over five years of experience in measurement, conducted a primary standardization of 180 reports. Two professional industrial hygienists with more than 20 years of experience each reviewed and revised the results of the primary standardization. We also examined the validity on the usefulness of the standardized database by the two industrial hygienists. Results: The final standardization results were classified into eight major categories, 23 sub-major categories, 39 minor categories, 53 unit categories and 70 sub-unit categories in the Korean Standard Industrial Classification (KSIC) 10th revision. A total of 161 processes were standardized, and there were 148 processes with K2B codes. Standard job was coded into 13 job groups including operator, automobile maintenance, nurse, maintenance, manager, excavating machine operator, forklift driver, radiologist, clinical pathologist, signer, researcher, kitchen assistant, and concrete reinforcement ironworker. Conclusions: Although the standardized information in this study may be only a part of the total information, it can be useful for improvement of the K2B system. Additional research is needed for an ongoing clean-up of data in the K2B and re-calibration and reclassification of standard processes until the future national exposure monitoring system is fully established.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.1
• /
• pp.93-100
• /
• 2012

Objective: This study is to review the current state of services offered to pharmacy users, and develop a service design converging a prescription service and a smart phone application service in order to enhance patients' experience at pharmacies and home. Background: Under the new medical system; separation of prescribing and dispensing drugs, a doctor writes a prescription to their patients and patients have their prescription filled at the pharmacy. As the number of flue, allergy and atopy patients has increased, waiting lines have been longer at pharmacies. Besides, the current medical service system lacks of providing proper information on prescribed pills to patients. There are already services offered during waiting times such as offering free drinks, magazines or suggesting general drugs which you can buy without prescription, however they neither cover the current medical service's shorts nor shorten the waiting time. Method: I researched objective and perceived waiting times reduction methods, the current service status at pharmacies, and the government's policy direction in a medical service. Also, I observed a patient's journey from the hospital to pharmacy and then home. I examined the circumstance at pharmacies, patients' behaviors and their thoughts during their journey, and extracted three main goals to design a service in order to help patients have positive perception during the waiting time; (1) to reduce the perceived time by the way of visualizing time and offering readings about what patients consider necessary, (2) to educate patients what they are into and how to get through, (3) to establish trust among patients, doctors and pharmacists. Based on three goals, I designed a structure and a wireframe for a new service application of smart phones. Results: With a new service design for pharmacy users, users can track their medical record and visit the information about their current medical treatments anytime. Also the service helps patients build reliable relationships with doctors and pharmacists. Conclusion: Experience is not just an activity but series of multiple activities. The serving range of a medical service should not be determined by stakeholders but user's holistic experience. By approaching a service design with a holistic vision, it can enrich not only a temporary experience but also a whole life well being. Application: Since there are already many service applications advising patients about their illness and finding right doctors, this service design is focused on the experience from getting a prescription till feeling better. The next move is to combine those two parts medical services and design an integrated service application. As a prescription is going to be coded in numbers, we might consider to design an un-attended pharmacy which can shorten huge amount of time for filling prescriptions.

• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.362-369
• /
• 2014

This study aimed to propose an accurate diagnostic method for osteoporosis by realizing a computer-aided diagnosis system with the application of the statistical analysis of texture features using digital images of lateral lumbar spine of patients with osteoporosis and providing reliable supplementary diagnostic information by model experimental research for early diagnosis of diseases. For these purposes, digital images of lateral lumbar spine of normal individuals and patients with osteoporosis were used in the experiments, and the values of statistical texture features on the set ROI were expressed in six parameters. Among the texture feature values of the six parameters of osteoporosis, the highest and lowest recognition rates of 95 and 80% were shown in average gray level and uniformity, respectively. Moreover, all the six parameters showed recognition rates of over 80% for osteoporosis: 82.5% in average contrast, 90% in smoothness, 87.5% in skewness, and 87.5% in entropy. Therefore, if a program developing into a computer-aided diagnosis system for medical images is coded based on the results of this study, it is considered possible to be applied to preliminary diagnostic data for automatic detection of lesions and disease diagnosis using medical images, to provide information for definite diagnosis of diseases, to diagnose by limited device, and to be used to shorten the time to analyze medical images.

• Journal of Korean Academy of Nursing
• /
• v.21 no.3
• /
• pp.365-382
• /
• 1991

This study was designed to measure the physical, mental-emotional and social health status of elderlies according to rural areas, medium - small cities, and large city environment. Data collection was done from July 18 to August 17 1990. The subjects were a convenience sample after their place of residence was stratified into large, medium- small cities and rural areas. Those who attended elderly centers in Seodaemun, Mapo, and Kangnam districts in Seoul were considered to be residents of a large city and interviewed by trained research assistants and student nurses. Elderlies living in Chungju, Jinju, Chuncheon, and Jeonju cities were coded as residents of medium-small cities and were interviewed by professors of nursing colleges. Rural residents were interviewed by the community health practioners working in community health clinics in North and South Kyongsang, North and South Jeolla, and Kyonggi provinces. The tool used in this study was the health assessment tool developed by Choi, Young Hee in 1990. This tool was organized into 20 physical health status, 17 mental - emotional health status, and 37 social health ststus items. Physical health status items consisted of six factors - personal hygiene activity ability, external activity utilizing traffic, mass media, and spare time ability, sexual ability, digestive system related ability, sexual ability, sensory ability, and elimination ability. Mental - emotional health status items consisted of two factors - mental health factor and emotional health factor. Social health status items consisted of seven factors -grandparental role ability, parental role ability, spoused role ability, friendship role ability, kinship role ability, group member role ability, and religious believer role ability. Data Analysis included frequencies, percentage, mean, standard deviation, ANOVA, and chi - square test. The results of the analysis are as follows : 1. The mean physical health status score for large city residents was 4.1132, for rural residents 4.0787, and for medium and small city residents 3.9565. There were significant differences according to residential area for personal hygiene activity ability, external activity ability, sexual ability, and digestive system related ability items 2. The mean mental -emotional health status score for rural residents was 3.8291, for medium and small city residents 3.7967, and for large city residents 3.7807. There was a significant difference according to residential area in the mental health ability item. 3. The mean social health status score for medium and small city residents was 3.0000, for rural residents 2.9362, and for large city residents 2.8960. There were significant differences according to residential area for kinship role ability and religious believer role ability items. The following conclusion was derived from the above results 1. The physical health status of elderlies residing in medium - small cities and in rural areas was lower than that of those residing in Seoul, a large urban area. Therefore, more medical facilities are needed in rural area so as to monitor their health, prevent disease, and promote their health. 2. The mental -emotional ststus and social health status of elderlies residing in the large city were lower than that of those residing in medium - small cities and rural areas. This may reflect weakening of the strong traditional family bond that may happen with urbanization. Continued support for elderly parents is essential and education should emphasize the traditional cultural norm and value of filial piety. 3. Facilities and programs for elderly are needed so that they may spend their time more valuably in their urban environment.

• Journal of Navigation and Port Research
• /
• v.32 no.6
• /
• pp.459-464
• /
• 2008

In this paper, we present the model-based fuzzy controller for container cranes which effectively performs set-point tracking control of trolley and anti-swaying control under system parameter and disturbance changes. The first part of this paper focuses on the development of Takagi-Sugeno (T-S) fuzzy modeling in a nonlinear container crane system. Parameters of the membership functions are adjusted by a RCGA to have same dynamic characteristics with nonlinear model of a container crane. In the second part, we present a design methodology of the model-based fuzzy controller. Sub-controllers are designed using LQ control theory for each subsystem in fuzzy model and then the proposed controller is performed with the combination of these sub-controllers by fuzzy IF-THEN rules. In the results of simulation, the fuzzy model showed almost similar dynamic characteristics compared to the outputs of the nonlinear container crane model. Also, the model-based fuzzy controller showed not only the fast settling time for the change in parameter and disturbance, but also stable and robust control performances without any steady-state error.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.663-670
• /
• 2020

In the present study, we assessed the accuracy of aerial triangulation using a UAV (Unmanned Aerial Vehicle) capable of network RTK (Real-Time Kinematic) survey in a disaster situation that may occur in a semi-urban area mixed with buildings. For a reliable survey of check points, they were installed on the roofs of buildings, and static GNSS (Global Navigation Satellite System) survey was conducted for more than four hours. For objective accuracy assessment, coded aerial targets were installed on the check points to be automatically recognized by software. At the instance of image acquisition, the 3D coordinates of the UAV camera were measured using VRS (Virtual Reference Station) method, as a kind of network RTK survey, and the 3-axial angles were achieved using IMU (Inertial Measurement Unit) and gimbal rotation measurement. As a result of estimation and update of the interior and exterior orientation parameters using Agisoft Metashape, the 3D RMSE (Root Mean Square Error) of aerial triangulation ranged from 0.153 m to 0.102 m according to the combination of the image overlap and the angle of the image acquisition. To get higher aerial triangulation accuracy, it was proved to be effective to incorporate oblique images, though it is common to increase the overlap of vertical images. Therefore, to conduct a UAV mapping in an urgent disaster site, it is necessary to acquire oblique images together rather than improving image overlap.

• The Korean Journal of Franchise Management
• /
• v.9 no.1
• /
• pp.27-39
• /
• 2018

Purpose - Recently, the mobile application field has been receiving astronomical attention from the past few years due to the growing number of mobile app downloads and withal due to the revenues being engendered. Especially delivery apps by mobile service market is experiencing rapid growth and competition is intensifying. Therefore, delivery apps' choice attributes has become important as a strategy for survival of franchise firms. Based on previous studies, this research proposed the theoretical framework about the structural relationships among customer satisfaction, trust and revisit intention on delivery apps' choice attributes. Research design, data, and methodology - This study examines the structural relationship between choice attributes of using the delivery app, satisfaction, trust, and revisit intention. More specifically, this study has been examined from the perspective of Generation Y who is enjoying electronic commerce and shopping with mobile phone. In this model, choice attributes of delivery app consists of three sub-dimensions such as service quality, system quality, interaction quality. So as to test the purposes of this study, research model and hypotheses were developed. After excluding 24 invalid respondent questionnaires, 201 valid questionnaires were coded and analyzed using frequency, confirmatory factor analysis, correlations analysis, and structural equation modeling with SPSS 21 and SmartPLS 3.0. Result - The results of the study are as follows. First, service quality and interaction quality had positive effects on satisfaction, and interaction quality had positive effects on trust, but system quality did not have a significant effect on both satisfaction and trust. Second, satisfaction had positive effects on both trust and revisit intention. Third, trust had positive effects on revisit intention. Conclusions - The implications of this study are following as: From the theoretical perspective, this study confirms the effect of delivery apps' choice attributes on satisfaction, trust, and revisit intention. In addition, it is significant that we examined the influence of choice attributes of delivery apps on their attitudes and behaviors of Generation Y familiar with mobile environment. Through this study, we hypothesized that the attributes of service quality and interaction quality of delivery apps have a significant effect on customer satisfaction, and this can be expected to provide meaningful implications for the development of franchise restaurant industry. To encourage continuous repurchase through customer satisfaction, franchise companies need to establish various strategic alliances with delivery app companies and new growth engines by providing diverse and high-quality services to customers in the smart age.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.5
• /
• pp.5-12
• /
• 2012

Antibiotics have been considered emerging compounds due to their continuous input and persistence in environment. Due to the limited biodegradability and widespread use of these antibiotics, an incomplete removal is attained in conventional wastewater treatment plants and relative large quantities are released into the environment. In this study, it was determined the adsorption and photocatalysis kinetics of antibiotics (Sulfamethoxazole, SMX) with various catalyst (Titanium dioxide; $TiO_2$, Hydroxyapatite; HAP) conditions under UV/$TiO_2$/HAP system. In addition, the statistical analysis of response surface methods (RSM) was used to determine the effects of operating parameters on UV/$TiO_2$/HAP system. $TiO_2$/HAP adsorbent were found to follow the pseudo second order reaction in the adsorption. In the result of applied intrapaticle diffusion model, the constants of reaction rate were $TiO_2$=$0.064min^{-1}$, HAP=$0.2866min^{-1}$ and $TiO_2$/HAP=$0.3708min^{-1}$, respectively.The result of RSM, term of regression analysis in analysis of variance (ANOVA) showed significantly p-value (p<0.05) and high coefficients for determination values($R^2$=96.2%, $R^2_{Adj}$=89.3%) that allowed satisfactory prediction of second order regression model. And the estimated optimal conditions for Y(Sulfamethoxazole removal efficiency, %) were $x_1$(initial concentration of Sulfamethoxazole)=-0.7828, $x_2$(amount of catalyst)=0.9974 and $x_3$(reation time)=0.5738 by coded parameters, respectively. According to the result of intraparticle diffusion model and photocatalysis experiments, it was shown that the $TiO_2$/HAP was more effective system than conventional AOPs(advanced oxidation processes, UV/$TiO_2$ system).

• Journal of the Korean Geographical Society
• /
• v.41 no.1 s.112
• /
• pp.106-120
• /
• 2006

Natural or man-made disaster has been expected to be one of the potential themes that can integrate human geography and physical geography. Typhoons like Rusa and Maemi caused great loss to insurance companies as well as public sectors. We have implemented a natural disaster management system for a private insurance company to produce better estimation of hazards from high wind as well as calculate vulnerability of damage. Climatic gauge sites and addresses of contract's objects were geo-coded and the pressure values along all the typhoon tracks were vectorized into line objects. National GIS topog raphic maps with scale of 1: 5,000 were updated into base maps and digital elevation model with 30 meter space and land cover maps were used for reflecting roughness of land to wind velocity. All the data are converted to grid coverage with $1km{\times}1km$. Vulnerability curve of Munich Re was ad opted, and preprocessor and postprocessor of wind velocity model was implemented. Overlapping the location of contracts on the grid value coverage can show the relative risk, with given scenario. The wind velocities calculated by the model were compared with observed value (average $R^2=0.68$). The calibration of wind speed models was done by dropping two climatic gauge data, which enhanced $R^2$ values. The comparison of calculated loss with actual historical loss of the insurance company showed both underestimation and overestimation. This system enables the company to have quantitative data for optimizing the re-insurance ratio, to have a plan to allocate enterprise resources and to upgrade the international creditability of the company. A flood model, storm surge model and flash flood model are being added, at last, combined disaster vulnerability will be calculated for a total disaster management system.