• 한국시뮬레이션학회논문지
• /
• 제14권2호
• /
• pp.35-43
• /
• 2005

Feedwater heaters of many nuclear power plants have recently experienced wall thinning damage, which will increase as operating time progresses. As it is judged that the wall thinning damages have generated due to local fluid behavior around the impingement baffle installed in downstream of the high pressure turbine extraction steam line to avoid colliding directly with the tubes, numerical analyses using PHOENICS code were performed for two models with original clogged impingement baffle and modified multi-hole impingement baffle. To identify the relation between wall thinning and fluid behavior, the local velocity components in x-, y-, and z-directions based on the numerical analysis for the model with the clogged impingement baffle were compared with the wall thickness data by ultrasonic test. From the comparison of the numerical analysis results and the wall thickness data, the local velocity component only in the y-direction, and not in the x- and z-direction, was analogous to the wall thinning configuration. From the result of the numerical analysis for the modified impingement baffle to mitigate the shell wall thinning, it was identified that the shell wall thinning may be controlled by the reduction of the local velocity in the y-direction.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.124-130
• /
• 2004

수치법을 검증하고 번형률과 연료농도가 무중력 확산화염 구조에 미치는 영향을 파악하기 위해, 무중력에서의 비예혼합 메탄-공기 대향류 화염의 구조를 FDS의 축대칭 모사로 조사하였다. 연료 중의 메탄 몰분율 $X_m$=20, 50, 80%와 각각의 몰분율에서 변형률 $a_g$=20, 50, $90s^{-1}$의 계산결과를 1차원 화염코드인 OPPDIF의 결과와 비교하였다. 축대칭 모사로 계산한 온도와 축방향 유속의 분포가 1차원 모사 결과와 잘 일치하였다. 화염의 두께와 위치, 정체점을 잘 예측함으로써 FDS를 넓은 범위의 변형률과 연료농도의 대향류 화염에 적응할 수 있음을 확인하였다.

• 한국정보통신학회논문지
• /
• 제11권6호
• /
• pp.1083-1088
• /
• 2007

본 논문에서는 한글 인덱스를 구현할 때 글자 단위를 기본으로 하는 경우 적용될 수 있는 검색 유형 (search pattern) 들은 어떠한 것들이 존재할 수 있는지에 대해 살펴보고, 검색 알고리즘에 적용시켜 본다. 이때 부호계와의 연관성과 효율성을 따져보기 위해서 KS X 1001의 두 바이트 조합형과 두 바이트 완성형, 그리고 유니코드 3.0의 조합형 부호계와 완성형 부호계 등 여러가지 부호계를 사용할 때에 대해 기본 검색 알고리즘을 적용해 본다.

• Structural Engineering and Mechanics
• /
• 제27권3호
• /
• pp.277-292
• /
• 2007

Based on the composite finite element simulation and a series of hydrostatic pressure and burst tests, autofrettage effects on strength and deformation of fiber reinforced pressure vessel with metallic liners have been studied in the paper (autofrettage: during the course of one pressure taking effect, the increasing internal stress in metallic liner can surpass the yielding point and the plastic deformation will happen, which result in that when there is no internal pressure, there are press stress in liner while tensile stress in fiber lamination). By making use of a composite finite element Ansys code and a series of experiments, the autofrettage pressure is determined in order to make the aluminium liner be totally in elastic state, under given hydrostatic test pressure. The stress intensity factors of the longitudinal crack in aluminum liner end under internal pressure and thermal loads have been computed and analyzed before and after the autofrettage processing. Through numerical calculation and experiment investigations, it is found that a correct choice for autofrettage pressure can improve the gas-tightness and fatigue strength of FRP vessel.

• 한국자기공명학회논문지
• /
• 제26권1호
• /
• pp.1-9
• /
• 2022

There are two distinct approaches to improving the quality of protein NMR structures during refinement: all-atom force fields and accumulated knowledge-assisted methods that include Rosetta. Mao et al. reported that, for 40 proteins, Rosetta increased the accuracies of their NMR-determined structures with respect to the X-ray crystal structures (Mao et al., J. Am. Chem. Soc. 136, 1893 (2014)). In this study, we calculated 32 structures of those studied by Mao et al. using all-atom force field and implicit solvent model, and we compared the results with those obtained from Rosetta. For a single protein, using only the experimental NOE-derived distances and backbone torsion angle restraints, 20 of the lowest energy structures were extracted as an ensemble from 100 generated structures. Restrained simulated annealing by molecular dynamics simulation searched conformational spaces with a total time step of 1-ns. The use of GPU-accelerated AMBER code allowed the calculations to be completed in hours using a single GPU computer-even for proteins larger than 20 kDa. Remarkably, statistical analyses indicated that the structures determined in this way showed overall higher accuracies to their X-ray structures compared to those refined by Rosetta (p-value < 0.01). Our data demonstrate the capability of sophisticated atomistic force fields in refining NMR structures, particularly when they are coupled with the latest GPU-based calculations. The straightforwardness of the protocol allows its use to be extended to all NMR structures.

• 한국정보처리학회논문지
• /
• 제6권4호
• /
• pp.932-940
• /
• 1999

객체 지향 기법은 일반적으로 소프트웨어의 재사용성을 향상시킨다고 알려져 있다. 그러나 실제 객체 지향 소프트웨어를 재사용하기 위해서는 재구조화 과정이 필요하다는 사실이 점차 인식되고 있다. Refactoring은 객체 지향 소프트웨어의 재사용성과 유연성을 향상시키기 위하여 소프트웨어 시스템의 구조를 정제하는 과정이다. 본 논문에서는 이러한 Refactoring 기법을 기존에 구현된 바 있는 객체 지향 CASE(Computer Aided Software engineering) 도구인 OODesigner 버전 1.x에 적용한 연구 결과를 제시한다. 버전 1.x는 Rumbaugh의 OMT(Object Modeling Technique) 모델 중에서 객체 모델을 지원하며, 객체도표 작성, 클래스 자원에 대한 문서화, 자동적인 C++ 코드생성, 클래스 재사용을 위한 정보 저장소, C++코드의 역공학 기능들을 지원한다. 비로 버전 1.x가 요구되는 기능과 신뢰성에 문제가 없었으나 구조적인 관저에서 문제를 가지고 있었기 때문에 새로운 기능을 추가하고 유지 보수하는데 많은 어려움이 있었다. 그러므로 본 연구에서는 기존의 버전 1.x를 재구조화하여 보수 유지가 용이한 시스템 구조로 만들었다 본 논문에서는 재구조화의 필요성, 재구조화 과정, 재구조화 내용 그리고 재구조화 효과에 대해 기술하고, 기존의 OODesigner 버전 1.x 와 재구조화된 OODesigner 버전2.x를 소프트웨어 메트릭(metric)를 통해 비교 분석한 결과와 이 과정에서 얻은 경험들을 제시한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.7-12
• /
• 2007

본 연구에서는 선행연구에 의해 설계되어진 20인승급 소형 위그선의 주날개 구조를 엔진 및 프로펠러에 의해 유발되는 진동을 가진력으로 하여 강제진동 해석을 수행하였다. 대상 위그선은 왕복엔 진을 날개에 장착하여 프로펠러에 의한 추력으로 비행하며， 미는 형식(Pusher Type)의 엔진 배열을 취하고 있다. 유한요소해석을 위해서 구조해석 상용프로그랩인 MSC/NASTRAN을 사용하였으며， 엔진의 주요 진동 특성인 X-mode 와 Y-mode 그리고 Z-mode를 특정 가진 주파수로 하여 주파수 응답 해석을 수행하였고, 엔진의 추력방향 진동 모드인 X-mode를 프로펠러의 회전에 의해 진동을 수반하는 가진 추력으로 가정하여 과도응답 해석을 수행한 후 날개의 진동 특성을 살펴보았다.

• Journal of Biosystems Engineering
• /
• 제38권2호
• /
• pp.87-94
• /
• 2013

Purpose: Pineapple is now the third most important tropical fruit in world production after banana and citrus. Phytosanitary irradiation is recognized as a promising alternative treatment to chemical fumigation. However, most of the phytosanitary irradiation studies have dealt with physiochemical properties and its efficacy. Accurate dose calculation is crucial for ensuring proper process control in phytosanitary irradiation. The objective of this study was to optimize phytosanitary irradiation treatment of pineapple in various radiation sources using Monte Carlo simulation. Methods: 3-D geometry and component densities of the pineapple, extracted from CT scan data, were entered into a radiation transport Monte Carlo code (MCNP5) to obtain simulated dose distribution. Radiation energy used for simulation were 2 MeV (low-energy) and 10 MeV (high-energy) for electron beams, 1.25 MeV for gamma-rays, and 5 MeV for X-rays. Results: For low-energy electron beam simulation, electrons penetrated up to 0.75 cm from the pineapple skin, which is good for controlling insect eggs laid just below the fruit surface. For high-energy electron beam simulation, electrons penetrated up to 4.5 cm and the irradiation area occupied 60.2% of the whole area at single-side irradiation and 90.6% at double-side irradiation. For a single-side only gamma- and X-ray source simulation, the entire pineapple was irradiated and dose uniformity ratios (Dmax/Dmin) were 2.23 and 2.19, respectively. Even though both sources had all greater penetrating capability, the X-ray treatment is safer and the gamma-ray treatment is more widely used due to their availability. Conclusions: These results are invaluable for optimizing phytosanitary irradiation treatment planning of pineapple.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1734-1741
• /
• 2023

This work presents the synthesis and preparation of a new glass system described by the equation of (70-x) B₂O₃-5TeO₂ -20SrCO₃-5ZnO -xBi₂O₃, x = 0, 1, 5, 10, and 15 mol. %, using the melt quenching technique at a melting temperature of 1100 ℃. The photon-shielding characteristics mainly the linear attenuation coefficient (LAC) of the prepared glass samples were evaluated using Monte Carlo (MC) simulation N-particle transport code (MCNP-5) at gamma-ray energy extended from 59 keV to 1408 keV emitted by the radioisotopes Am-241, Ba-133, Cs-137, Co-60, Na-22, and Eu-152. Furthermore, we observed that the Bi₂O₃ content of the glasses had a significantly stronger impact on the LAC at 59 and 356 keV. The study of the lead equivalent thickness shows that the performance of fabricated glass sample with 15 mol.% of Bi₂O₃ is four times less than the performance of pure lead at low gamma photon energy while it is enhanced and became two times lower the perforce of pure lead at high energy. Therefore, the fabricated glasses special sample with 15 mol.% of Bi₂O₃ has good shielding properties in low, intermediate, and high energy intervals.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.247-256
• /
• 2024

The glass series modified by tungsten oxide was created using the compounds (75-x) B₂O₃- 10SrCO₃- 8TeO₂- 7ZnO - xWO₃, where x = 0, 1, 5, 10, 22, 27, 34, and 40% mole percentage. A UV-visible spectrophotometer and thermogravimetric-differential thermal analysis (TG-DTA) methods were employed to characterize the specimen's optical and phase transition attributes, respectively. The mass-attenuation coefficient (AC) of all created glasses from BSTZW0 to BSTZ7 was estimated using Geant4 code from 0.05 to 3 MeV and compared to the XCOM software results, with a relative difference of less than 2% between the two results. The increase of WO₃ percentage lead to an increase in the Linear-AC at each studied energy, and this is mainly due to the fact that the higher the percentage of WO₃ in the glass increases its density which causes an increase in the Linear-AC, so an energy of 0.06 MeV, as an example, the values of the Linear-AC was 4.009, 4.509, 5.442, 6812, 8.564, 9.856, 10.999 and 11.628 cm^-1 form BSTZW0 too BSTZW7, respectively. The Half-VL (value layer), Mean-FP (free path), Tenth-VL, and Radiation attenuation performance (RAP) were also calculated for the current BSTZW-glass samples and revealed that BSTZW7 had the best gamma ray attenuation performance at all discussed energies when compared to other studied glass samples.