• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2218-2229
• /
• 2006

A conservative finite-volume numerical method for unstructured grids with the cell-centered method has been developed for computing flow and heat transfer by combining the attractive features of the existing pressure-based procedures with the advances made in unstructured grid techniques. This method uses an integral form of governing equations for arbitrary convex polyhedra. Care is taken in the discretization and solution procedure to avoid formulations that are cell-shape-specific. A collocated variable arrangement formulation is developed, i.e. all dependent variables such as pressure and velocity are stored at cell centers. For both convective and diffusive fluxes the forms superior to both accuracy and stability are particularly adopted and formulated through a systematic study on the existing approximation ones. Gradients required for the evaluation of diffusion fluxes and for second-order-accurate convective operators are computed by using a linear reconstruction based on the divergence theorem. Momentum interpolation is used to prevent the pressure checkerboarding and a segregated solution strategy is adopted to minimize the storage requirements with the pressure-velocity coupling by the SIMPLE algorithm. An algebraic solver using iterative preconditioned conjugate gradient method is used for the solution of linearized equations. The flow analysis code (PowerCFD) developed by the present method is evaluated for its application to several 2-D structured-mesh benchmark problems using a variety of unstructured quadrilateral and triangular meshes. The present flow analysis code by using unstructured grids with the cell-centered method clearly demonstrate the same accuracy and robustness as that for a typical structured mesh.

• 한국해양공학회지
• /
• 제30권2호
• /
• pp.84-90
• /
• 2016

In this study, a six degree-of-freedom motion analysis of a wind-wave hybrid platform equipped with numerous wave energy converters (WECs) was carried out. To examine the effect of the WECs on the platform, an analysis of one-way coupling was carried out, which only considered the power take-off (PTO) damping of the static WECs on the platform. The equation of motion of a floating platform with mooring lines in the time domain was established, and the responses of the one-way coupled platform were then compared with the case of a platform without any coupling effects from the WECs. The hydrodynamic coefficients and wave exciting forces were obtained from the 3D diffraction/radiation pre-processor code WAMIT based on the boundary element method. Then, an analysis of the dynamic responses of the floating platform with or without the WEC effect in the time domain was carried out. All of the dynamics of a floating platform with multiple wind turbines were obtained by coupling FAST and CHARM3D in the time domain, which was further extended to include additional coupled dynamics for multiple turbines. The analysis showed that the PTO damping effect on platform motions was negligible, but coupled effects between multiple WECs and the platform may differentiate the heave, roll, and pitch platform motions from the one without any effects induced by WECs.

• Structural Engineering and Mechanics
• /
• 제66권4호
• /
• pp.505-513
• /
• 2018

Steam flooding is widely used in heavy oil reservoir with coupling effects among the formation temperature change, fluid flow and solid deformation. The effective stress, porosity and permeability in this process can be affected by the multi-physical coupling of thermal, hydraulic and mechanical processes (THM), resulting in a complex interaction of geomechanical effects and multiphase flow in the porous media. Quantification of the state of deformation and stress in the reservoir is therefore essential for the correct prediction of reservoir efficiency and productivity. This paper presents a coupled fluid flow, thermal and geomechanical model employing a program (MATLAB interface code), which was developed to couple conventional reservoir (ECLIPSE) and geomechanical (ABAQUS) simulators for coupled THM processes in multiphase reservoir modeling. In each simulation cycle, time dependent reservoir pressure and temperature fields obtained from three dimensional compositional reservoir models were transferred into finite element reservoir geomechanical models in ABAQUS as multi-phase flow in deforming reservoirs cannot be performed within ABAQUS and new porosity and permeability are obtained using volumetric strains for the next analysis step. Finally, the proposed approach is illustrated on a complex coupled problem related to steam flooding in an oil reservoir. The reservoir coupled study showed that permeability and porosity increase during the injection scenario and increasing rate around injection wells exceed those of other similar comparable cases. Also, during injection, the uplift occurred very fast just above the injection wells resulting in plastic deformation.

• 지질공학
• /
• 제11권3호
• /
• pp.255-267
• /
• 2001

지하 50m의 화강암반내 단층지역에 위치한 지하 방사성폐기물 처분장 인접지역에서의 열, 수리, 및 역학적 연성거동을 비교하고 분석하였다. 해석에는 2차원 해석코드인 UDEC을 사용하였다. 해석모델은 화강암반, 처분공내의 압축 벤토나이트로 둘러싸인 PWR 사용후 핵연료 처분용기, 및 처분동굴내에 채워진 혼합 벤토나이트를 포함한다. 수리-역학적, 열-역학적, 및 열-수리-역학적 연성거동을 비교 및 분석하였다. PWR 사용후 핵연료내의 방사성 물질로부터 나오는 시간의존 방사성 붕괴열이 처분장 및 인접지역에 미치는 영향을 분석하였다. 수리해석에는 steady state flow 알고리즘을 사용하였다.

• Structural Engineering and Mechanics
• /
• 제70권4호
• /
• pp.479-497
• /
• 2019

In the current code design, the use of a uniform internal pressure coefficient of cooling towers as internal suction cannot reflect the 3D characteristics of flow field inside the tower body with different ventilation rate of shutters. Moreover, extreme weather such as heavy rain also has a direct impact on aerodynamic force on the internal surface and changes the turbulence effect of pulsating wind. In this study, the world's tallest cooling tower under construction, which stands 210m, is taken as the research object. The algorithm for two-way coupling between wind and rain is adopted. Simulation of wind field and raindrops is performed iteratively using continuous phase and discrete phase models, respectively, under the general principles of computational fluid dynamics (CFD). Firstly, the rule of influence of 9 combinations of wind speed and rainfall intensity on the volume of wind-driven rain, additional action force of raindrops and equivalent internal pressure coefficient of the tower body is analyzed. The combination of wind velocity and rainfall intensity that is most unfavorable to the cooling tower in terms of distribution of internal pressure coefficient is identified. On this basis, the wind/rain loads, distribution of aerodynamic force and working mechanism of internal pressures of the cooling tower under the most unfavorable working condition are compared between the four ventilation rates of shutters (0%, 15%, 30% and 100%). The results show that the amount of raindrops captured by the internal surface of the tower decreases as the wind velocity increases, and increases along with the rainfall intensity and ventilation rate of the shutters. The maximum value of rain-induced pressure coefficient is 0.013. The research findings lay the basis for determining the precise values of internal surface loads of cooling tower under extreme weather conditions.

• 대한전자공학회논문지SD
• /
• 제37권1호
• /
• pp.44-51
• /
• 2000

Series Coupler Access Encodler(SCAE)와 Series Coupler Access Decoder(SCAD)를 이용한 광CDMA(Code Division Multiple Access)시스템에서 광정합필터 특성을 삼차신호까지 고려하여 분석하였다. 기존의 연구에서는 SCAE 및 ACAD를 평가할 때, 일차신호만을 고려하여 시스템의 성능을 분석하여 성능평가가 정확하지가 않았다. SCAE 및 SCAD는 커플러 수를 증가함에 따라 여러 형태의 간섭신호들을 가지므로, 이러한 신호들이 자기상관과 상호상관 세기를 변화시킨다. 그러므로 좀 더 정확한 시스템 성능을 분석하기 위해서는 간섭신호들의 특성을 연구할 필요성이 있다. 본 논문에서는 복호화 되는 광신호를 삼차신호까지 수학적으로 해석하였고, 시스템의 자기상관과 상호상관에 미치는 영향을 모의실험을 통해 분석하였다. 커플러 수 증가에 따라 나타나는 삼차신호들이 간섭신호 형태가 되어 peak to side-lobe ratio를 감소키기는 요인으로 작용됨을 정량적으로 확인하였다. 간섭신호들의 크기는 ${\alpha}$(coupling coefficient)값이 커질수록 증가하였으며, 커플러 개수(N)=5, ${\alpha}$=0.5인 조건에서 삼차신호까지 고려한 peak to side-lobe ratio는 3.75 dB까지 열화됨을 밝혔다. 또한, 일차신호의 main-lobe세기에 의해 수신기의 임계레벨을 결정한다면, 삼차신호에 의해 증가된 side-lobes세기 때문에 SCAE와 SCAD를 이용한 광 CDMA system에 다중 접속할 수 있는 사용자 수가 제한됨을 알 수 있었다.

• 대한조선학회논문집
• /
• 제42권4호
• /
• pp.330-340
• /
• 2005

Compressible two-phase flow is analyzed based on the arbitrary Lagrangian-Eulerian (ALE) formulation. For water, Tamman type stiffened equation of state is used. Numerical fluxes are calculated using the ALE two-phase Godunov scheme which assumes only that the speed of sound and pressure can be provided whenever density and internal energy are given. Effects of the approximations of a material interface speed are Investigated h method Is suggested to assign a rigid body boundary condition effectively To validate the developed code, several well-known problems are calculated and the results are compared with analytic or other numerical solutions including a single material Sod shock tube problem and a gas/water shock tube problem The code is applied to analyze the refraction and transmission of shock waves which are impacting on a water-gas interface from gas or water medium.

• Journal of Radiation Protection and Research
• /
• 제10권1호
• /
• pp.41-49
• /
• 1985

1,300 MWe 가압경수로 공동내에서 중성자의 흐름해석이 수행되었다. 중성자의 흐름을 해석하는데는 1차원 수송코드인 ANISN, 2차원 수송코드인 DOT3.5, 3차원 Monte Carlo 코드인 TRIPOLI-02와 이들을 접속시켜주는 DOTTRI 등의 전산코드가 이용되었고, 본 계산에 사용된 전산기는 IBM 3033형이었다. 계산된 선속 및 선량율은 900 MW 가압경수로의 공동내에서 측정한 측정치와 비교검토 되었고, 그 결과 중성자 군별로 약간의 오차는 있었으나 전체적으로 큰 오차는 없었다. 이 결과는 대용량의 원자로 차폐설계, 원자로보수시, 기타 원자로 공동내에 출입할 경우에 방사선방어상 필요한 방어수단을 제공하는데 기여하였다.

• 대한기계학회논문집B
• /
• 제29권9호
• /
• pp.1049-1056
• /
• 2005

A conservative pressure-based finite-volume numerical method has been developed for computing flow and heat transfer by using an unstructured grid system. The method admits arbitrary convex polyhedra. Care is taken in the discretization and solution procedures to avoid formulations that are cell-shape-specific. A collocated variable arrangement formulation is developed, i.e. all dependent variables such as pressure and velocity are stored at cell centers. Gradients required for the evaluation of diffusion fluxes and for second-order-accurate convective operators are found by a novel second-order accurate spatial discretization. Momentum interpolation is used to prevent pressure checkerboarding and the SIMPLE algorithm is used for pressure-velocity coupling. The resulting set of coupled nonlinear algebraic equations is solved by employing a segregated approach, leading to a decoupled set of linear algebraic equations fer each dependent variable, with a sparse diagonally dominant coefficient matrix. These equations are solved by an iterative preconditioned conjugate gradient solver which retains the sparsity of the coefficient matrix, thus achieving a very efficient use of computer resources.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.7-13
• /
• 2011

The fluid-structure interaction of a towed body is simulated using a developed code, which is based on the flux-difference splitting scheme on the hybrid Cartesian/immersed boundary method. To improve the stability in the coupling between the fluid and structure domains, a scheme is used, in which the effects of structure deformation are treated implicitly. The developed code is validated for the fluid-structure interaction problem through comparisons with other results on the vortex-induced vibration of elastically mounted cylinders. To simulate behavior of a towed body, an asymmetric tension modelling for a towing cable is suggested. In the suggested model, the tension is proportional to the elongation of the cable, but the cable has no effect on the body motion whenever the distance between the endpoints of the cable is smaller than the original length of the cable. The fluid-structure interactions of a towed body are simulated on the basis of different parameters of the towing cables. It is observed that the suggested tension model predicts the snapping for a shorter towing cable, which is in accordance with the reported results.