• Restorative Dentistry and Endodontics
• /
• v.41 no.4
• /
• pp.246-254
• /
• 2016

Objectives: The aim of this investigation was to give insights into the impact of carbohydrate-electrolyte drinks on the likely capacity of enamel surface dissolution and the influence of human saliva exposure as a biological protective factor. Materials and Methods: The pH, titratable acidity (TA) to pH 7.0, and buffer capacity (${\beta}$) of common beverages ingested by patients under physical activity were analyzed. Then, we randomly distributed 50 specimens of human enamel into 5 groups. Processed and natural coconut water served as controls for testing three carbohydrate-electrolyte drinks. In all specimens, we measured surface microhardness (Knoop hardness numbers) and enamel loss (profilometry, ${\mu}m$) for baseline and after simulated intake cycling exposure model. We also prepared areas of specimens to be exposed to human saliva overnight prior to the simulated intake cycling exposure. The cycles were performed by alternated immersions in beverages and artificial saliva. ANOVA two-way and Tukey HDS tests were used. Results: The range of pH, TA, and ${\beta}$ were 2.85 - 4.81, 8.33 - 46.66 mM/L and 3.48 - $10.25mM/L{\times}pH$, respectively. The highest capacity of enamel surface dissolution was found for commercially available sports drinks for all variables. Single time human saliva exposure failed to significantly promote protective effect for the acidic attack of beverages. Conclusions: In this study, carbohydrate-electrolyte drinks usually consumed during endurance training may have a greater capacity of dissolution of enamel surface depending on their physicochemical proprieties associated with pH and titratable acidity.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.456-459
• /
• 2011

Among the various activated carbons available in the market, an optimum mixing method of two kind activated carbons with different adsorbability was investigated in this study. The representative adsorption behaviors of the activated carbon are the adsorption isotherm plots obtained by the BET-Analysis which suggests also basic information of adsorption filter design. So we have tested three cases with certifications, the one was the extreme case of coal cokes based activated carbon with highest BET-model and coconut-shell based activated carbon with the lowest Langmuir-model, the other middle and cross case were applied this method to two kinds of activated carbons with higher and lower specific surface areas which are not available but supplied as research samples by an authority of an Korean Research Institute.

• Journal of Environmental Health Sciences
• /
• v.35 no.6
• /
• pp.500-509
• /
• 2009

Passive samplers have been used for many years for the sampling of organic vapors in work environment atmospheres. Currently, all passive samplers used in domestic occupational monitoring are foreign products. This study was performed to evaluate variable parameters for the development of passive organic samplers, which include the geometry of the device and diffusive length for the sampler design. Four prototype diffusive lengths; A-1(4.5 mm), A-2(7.0 mm), A-3(9.5 mm), A-4(12.0 mm) were tested for adsorption performances to a chemical mixture (benzene, toluene, trichloroethylene, and n-hexane) according to the US-OSHA's evaluation protocol. A dynamic vapor exposure chamber developed and verified by related research was used for this study. The results of study are as follows. The results in terms of sampling rate and recommended sampling time test indicate that the most suitable model was A-3 (9.5 mm diffusive lengths on both sides) for passive sampler design in time weighted average (TWA) assessment. Sampling rates of this A-3 model were 45.8, 41.5, 41.4, and 40.3 ml/min for benzene, toluene, trichloroethylene, and n-hexane, respectively. The A-3 models were tested on reverse diffusion and conditions of low humidity air (35% RH) and low concentrations (0.2 times of TLV). These conditions had no affect on the diffusion capacity of samplers. In conclusion, the most suitable design parameters of passive sampler are: 1) Geometry and structure - 25 mm diameter and 490 $mm^2$ cross sectional area of diffusion face with cylindrical form of two-sided opposite diffusion direction; 2) Diffusive length - 9.5 mm in both faces; 3) Amount of adsorbent - 300 mg of coconut shell charcoal; 4) Wind screen - using nylon net filters (11 ${\mu}m$ pore size).

• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.24-29
• /
• 2017

In this paper, we have developed the nano carbon tile and chip which is based on a reducing process of oxidation and the viscous fluid control, after hardening to the stylene monomer and methylol acrylamide monomer using an acrylic emulsion junction material. Then we can obtain the sphere form structure of diagonal 1~3 mm, they have mixture the acrylic emulsion junction material(45%) and the coconut carbon powder(55%) of size 300~500 mesh for 25~30 min. Finally, if we have dry for the formated carbon including 30~90 minute at $90{\sim}300^{\circ}C$, then be obtained for pure carbon formation of 95%. In order to identify the safety of the friendly circumstance carbon formation, we have tested the far-infrared ratio, energy analysis, gas density and anti-disease germs experiment.

• Journal of Environmental Science International
• /
• v.11 no.3
• /
• pp.241-246
• /
• 2002

One of the Musty and earthy smell compounds in raw water is generally attributed to 2-methylisoborneol (2-MIB). It is well known that activated carbon and oxidants such as $O_3$, Cl $O_2$, are effective ways to control 2-MIB. In isotherm equilibrium experiments, 2-MIB in distilled water was much more adsorbed to the activated carbon(A/C) than raw water containing dissolved organic carbon (DOC). The Freundlich constants(k) of distilled water and raw water were 3.36 and 0.049, and 1/n values were 0.80 and 0.42, respectively. The 2-MIB residual rate were Y = $e^{-0}$.55x/~ $e^{-0}$.54x/ with Ozone( $O_3$) dose by 5 minutes contact time at the 241 and 353 ng/L initial concentrations. The 2-MIB residual rate were Y = $e^{-0}$.32x/~ $e^{-0}$.35x/ with Chlorine dioxide(Cl $O_2$) dose by 15 minutes contact time at the 89 and 249 ng/L initial concentrations. 2-MIB was decreased from 1911 ng/L to 569ng/L by post-ozonation(70%removal efficiency) and removal efficiencies of 2-MIB by the following 4 kinds Granular Activated Carbon(GAC) process such as coal base, coconut base, wood base and zeolite＋carbon base were 95.8, 89.5, 88.4, and 93.7% respectively.ely.

• Plant Biotechnology Reports
• /
• v.3 no.3
• /
• pp.259-266
• /
• 2009

A plantlet regeneration protocol was developed on pot-grown mature plants of Elaeocarpus robustus Roxb. cv. Dwarf from nodal and leaf explants. The best yield of adventitious shoots was achieved from the leaf-derived calli in a modified MS ($MMS_1$, half strength of major salts, full strength of minor salts, and vitamins) medium containing $4.0{\mu}M$ BA + $4.0{\mu}M$ Kn + $0.5{\mu}M$ NAA + 15% coconut water (CW). The shoot multiplication rate was amplified about twofold per culture after the addition of 15% CW to the medium. The rate of shoot multiplication reached maximum at the 5th subculture, and it maintained this rate throughout the 3 subsequent subcultures. The best rooting in vitro was investigated by subculturing the microcuttings in an $MMS_2$ (half strength of both major salts and minor salts and full strength of vitamins) medium containing $1.0{\mu}M$ IBA in the dark for one initial week at $30^{\circ}C$, followed by subculturing them in a plant-growth regulator (PGR)-free medium in the light. The plantlets raised in vitro were successfully established under ex vitro conditions.

• Korean Journal of Pharmacognosy
• /
• v.36 no.3 s.142
• /
• pp.229-234
• /
• 2005

Nelumbo nucifera Gaertner leaf (NNL) has been known that is effective to lowering blood pressure and hyperlipidemic levels. But, its pharmacological actions have not been demonstrated. Therefore, the present research was performed to find the effect of NNL on hyperlipidemic actions in Bio F1B hamster as a model for hyperlipidemia and atherosclerosis. The hyperlipidemic hamster were induced by basal diet containing 10% coconut oil and 0.05% cholesterol with high fat atherogenic diet(HFAD). A control group and treated groups NNL100, 200, 400 mg/kg/day were fed a HFAD, but a normal group was fed a basal diet only. In conclusion, the serum total cholesterol levels were significantly declined on day 40 in F1B hamster given the NNL extracts (200, 400 mh/kg/day) with p<0.05, when compared with a control value of HFAD fed hamsters. The hepatic TC level was significantly lower in NNL 200 and 400 mg/kg/day group than of control hamster on day 40. But, the HDL levels were not changed between control and treated NNL groups. The TG levels of NNL treated groups showed a decrease tendency compare to the control value. In addition, accumulation of fatty level showed a slight decline to NNL treated groups in aortic arch.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.5
• /
• pp.418-425
• /
• 1991

This study was designed to observe the effects of the fish oil and some seed oils on the improvement of the fatty acid compositions of liver and brain tissue in rats. In order to induce the hypertriglyceridemia in the rats of the Sprague-Dawley, 12% coconut oil and 3% each of olive oil, lard, fish oil, perilla oil, corn oil, red pepper seed oil and evening primrose oil were administered to the rats for 4 weeks. In the fatty acid composition of liver lipid, n-3 PUFA contents were most in the fish oil and perilla oil groups of phospholipid fraction, and n-6 PUFA contents were most in the corn oil, red pepper seed oil and evening primrose oil groups of triglyceride fractions. Fatty acid composition of liver lipid fractions were influenced from the fatty acid composition of the test lipids. In the fatty acid composition of brain phospholipid, n-3 PUFA contents (8.8~17.2%) were most in the fish oil group, and n-6 PUFA (34.6~38.2%), though it contains high percentage, showed little difference between groups.

• Journal of Plant Biotechnology
• /
• v.45 no.4
• /
• pp.347-356
• /
• 2018

Chionanthus retusus is a small deciduous tree that is widely used in landscaping due to its beautiful white spring flowers and ornamental value. Conventional propagation through seeds requires one to two years of breaking dormancy. The objective of this study was to determine the conditions of in vitro germination in C. retusus. In vitro embryo culture was carried out to investigate the effects of six factors: basal media (McCown Woody Plant Medium (WPM) and Murashige and Skoog (MS)); plant growth regulators (different combinations and concentrations of naphthaleneacetic acid (NAA), 6-Benzylaminopurine (BA), and gibberellic acid ($GA_3$)); embryo age (collected weekly beginning 36 days after fruit setting); low temperature pretreatment (storing $4^{\circ}C$ for 1, 2, 3, and 4 weeks); coconut additives (100, 200, and $300ml{\cdot}L^{-1}$); and genotype (grouping plants depending on their flowering nature). The basal medium used in this study was WPM with $2mg{\cdot}L^{-1-1}\;GA_3$, $20g{\cdot}L^{-1}$ sucrose, and $6g{\cdot}L^{-1}$ Agar. WPM medium mixed with $GA_3$, resulted in higher germination rate as compared to when using a combination of auxin and cytokinin. $GA_3$ at $2mg{\cdot}L^{-1}$ was the most effective of all combinations and concentrations of PGRs. WPM medium with $2mg{\cdot}L^{-1}GA_3$ resulted in better and faster germination (75.93%). Embryos collected at 57 days after fruit setting had the highest percent of germinated seeds (87.04%) while low-temperature pretreatment of fruits at $4^{\circ}C$ for two weeks produced the highest germination (95.37%). These results of this study could be an open ground for development of an efficient protocol for commercial production of the ornamental tree.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.55-55
• /
• 2019

Strawberry which is the genus Fragaria under family Rosaceae is one of the most important fruit plants for both fresh consumption and food processing in the temperate and subtropical countries. Propagation of strawberry is achieved either through runners or by in vitro micropropagation. Meristem tips, generally obtained from runners of virus-free plants, are commonly used to establish in vitro cultures, which are employed for mass propagation or as a source of plant material for regeneration and transformation experiments. This study was conducted to determine the optimal natural additives strength to improve sprouting shoot rate of apical meristem of strawberry 'Seolhyang'. Strawberry apical meristem at size (0.2 mm to 0.3 mm) with leaf primordials were cultured on the 1/3MS(Murashige & Skoog) medium supplemented with five natural additives such as coconut milk, maple sap, banana powder and peptone. The sprouting ratio and growth characteristics were evaluated after eight weeks after in vitro culture. Shoot ratio of 'Seolhyang' apical meristem was 72.9% in 1/3MS medium supplemented with maple sap. On the other hand, the low shoot ratio was observed 47.7% in 1/3MS medium supplemented with banana powder. Shoot length was different as natural additives but numbers of leaf was not significantiy different among the natural additives. As a result, the sprouting ratio and plant growth were enhanced effectively in 1/3MS medium with maple sap compared to the others.