• 한국주조공학회지
• /
• 제23권2호
• /
• pp.86-93
• /
• 2003

It has been a major concern in the foundry that steel castings manufactured by the evaporative pattern casting process encounter the carbon pick-up problem. A carbon rich layer at the evaporative pattern cast surface is a result of interactions between the gaseous products from foamed polystyrene and the molten metal. The carburized layer with a high hardness makes it difficult to machine the casting. In this study, the influence of the density of EPS pattern and coatings on carbon pick-up phenomena of S25C and S45C commercial carbon cast steel were investigated. As the density of EPS pattern is increased, the carbon concentration of decomposed pattern is increased and the thickness of carburized layer at the surface of steel castings is increased. Also as the density of coatings is increased, the permeability of coatings is decreased and the thickness of carburized layer at the surface of steel castings is increased. S25C steel which has lower original carbon content compared to S45C steel exhibited severe carburization.

• 콘크리트학회논문집
• /
• 제26권3호
• /
• pp.299-306
• /
• 2014

콘크리트 구조물의 철근 부식 문제를 해결하기 위하여 코팅철근이 사용된다. 에폭시 코팅 철근에 비해 아연코팅철근의 콘크리트 보의 휨 거동 영향에 대한 자료는 거의 없는 실정이다. 이 연구의 목적은 아연코팅철근이 콘크리트 보의 휨 거동에 미치는 영향을 파악하는 데 있다. 아연코팅철근을 사용한 부재와 일반철근을 사용한 부재의 구조실험을 통하여 휨 거동 특성을 비교하였다. 실험변수로써 철근의 아연코팅 유무, 사용 철근비와 피복 두께를 고려하였다. 아연코팅철근 콘크리트 보의 균열패턴, 균열폭, 처짐 및 변형률 특성을 파악하였다. 아연코팅철근 콘크리트 보의 휨강도는 일반철근 콘크리트 보의 휨강도와 거의 차이가 나지 않는다. 철근표면의 아연코팅은 처짐, 균열폭 비교 결과에도 뚜렷한 영향을 미치지 않는다. 또한, 아연코팅철근 보와 일반철근 보의 하중-변형률 곡선은 비슷한 결과를 나타낸다. 따라서, 전반적으로 아연코팅철근의 사용은 일반철근을 사용할 때에 비해 콘크리트 보의 휨 거동에 악영향을 미치지는 않는 것으로 나타난다.

• 전기학회논문지P
• /
• 제65권2호
• /
• pp.142-150
• /
• 2016

This paper developed new manufacture process technology of slim type flexible flat lighting product used lower power white LED. Flexible flat lighting is applied to letter sign lighting, traffic lighting, interior wall lighting, flat lighting, aquarium back lighting, wreath light etc. Main manufacture process technology were developed drawing software for electronics circuit, inkjet electronic circuit pattern and inkjet white ink coating. For pattern printing it was utilized for piezoelectonic inkjet head printing technology. Also high vacuum pressure laminating technology was waterproofing for LED flat lighting protection. Hence, form process technology we were manufactured for flexible flat lighting product of the power 12 W, input voltage 48 V and plane size $480{\times}480mm$. It acquired a these validity from experiment results.

• 대한한의학회지
• /
• 제32권2호
• /
• pp.42-62
• /
• 2011

Objective: This study was designed to identify and explore the pathological patterns of functional dyspepsia (FD) patients. We also evaluated the usefulness of the Pattern Identification Questionnaire by comparing it with other assessment tools for FD. Methods: We recruited 97 FD patients based on the Rome III criteria for FD diagnosis. The pathological patterns of the subjects were determined by the Pattern Identification Questionnaire. Their dyspepsia-related symptoms were assessed using the Gastrointestinal Symptom Questionnaire (GIS) and the Pyeongwi-san (Pingwei-san) Patternization Questionnaire. Depressive symptoms were evaluated with the Beck Depression Inventory (BDI) and quality of life with the Functional Dyspepsia-Related Quality of Life (FD-QoL) Questionnaire. Tongue coating was measured by the Digital Tongue Diagnosis System (DTDS). Results: The male to female ratio was 1:1.1, and the forties and fifties age groups were largest in number. The spleen deficiency and phlegm-dampness pattern was the most common pattern found among the FD patients. No significant differences in the GIS, BDI, FD-QoL, and DTDS scores were found among the five pattern types. All pattern types showed significant correlation with GIS, Pyeongwi-san Patternization Questionnaire, and FD-QoL scores. Conclusions: Pattern Identification Questionnaire can not only identify the pathological pattern types of FD patients but also evaluate the severity of their symptoms. Compared to conventional assessment tools for FD, it could enable a more dynamic evaluation of FD patients reflecting the severity of dyspeptic symptoms and the quality of life. Further studies on the Pattern Identification of FD patients are anticipated in order to improve the diagnosis and therapy for Korean FD patients.

• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.61-70
• /
• 2012

In this study the effect of heartwood-coating (HCO), vapor-dam (VD), bark-remaing (BR) and bark-remaining- coating (BRC) treatments were evaluated during air circulating oven-drying of hollowed round-post of Korean red pine. Hollowed round-post could be dried from the green condition to approximately 6% MC within 84 to 156 hours for the UC, HCO and VD specimens and it took 72 to 240 hours to about 8% MC, which is recommended as the indoor in-use MC. The temperatures in the hole of the Control (UC) and HCO specimens constantly showed a higher-leveled distribution pattern than those inside wood. The vapor pressure in the hole of the UC, HCO and BR specimens was higher than that inside wood and showed difference as highest value of about 20 mbar. The surface checks of all specimens were mild and were observed in increasing order of BRC, BR, UC, VD and HCO specimens.

• 한국전기전자재료학회논문지
• /
• 제28권11호
• /
• pp.727-730
• /
• 2015

In this paper, we fabricated organic compounds detector using the MWCNT/PMMA (multi-walled carbon nanotube / polymethylmethacrylate) composite film. We used polymer film as a matrix material for the device framework, and introduced CNTs for reacting with the organic compounds resulting in changing electrical conductivity. Spray coating method was used to form the MWCNT/PMMA composite film detector, and pattern formation of the detector was done by shadow mask during the spray coating process. We investigated changes of electrical conductivity of the detector before and after the organic compounds exposure. Electrical conductivity of the detector tended to decrease after the exposure with various organic compounds such as acetone, tetrahydrofuran (THF), toluene, and dimethylformamide (DMF). Finally we conclude that organic compounds detection by the MWCNT/PMMA composite film detector was possible, and expect the feasibility of commercial MWCNT/PMMA composite film detector for various organic compounds.

• 한국전기전자재료학회논문지
• /
• 제22권11호
• /
• pp.987-991
• /
• 2009

We report growth of vertically well-aligned zinc oxide (ZnO) nanorods on indium-tin oxide (ITO)/glass substrates using a simple aqueous solution method at low temperature via control of the ZnO seed layer morphology. ZnO nanoparticles acting as seeds are pre-coated on ITO-coated glass substrates. by spin coating to control distribution and density of the ZnO seed nanoparticles. ZnO nanorods were synthesized on the seed-coated substrates in a dipping process into a main growth solution. It was found that the alignment of ZnO nanorods can be effectively manipulated by the spin-coating speed of the seed layer. A grazing incidence X-ray diffraction pattern shows that the ZnO seed layer prepared using the higher spin-coating speed is of uniform seed distribution and a flat surface, resulting in the vertical growth of ZnO nanorods aligned toward the [0001] direction in the main growth process.

• 한국주조공학회지
• /
• 제15권6호
• /
• pp.604-615
• /
• 1995

Austenitic stainless steel castings using expandable polystylene(referred to hereafter as EPS) patterns are often affected by distinctive defects associated with incomplete decomposition of the EPS as the molds are filled with metal. The quality of the castings, with particular reference to carbon pick-up in austenitic stainless steel is further influenced to a significant extent by such factors as reduced pressure, the additive by adding $Na_2CO_3$ in coating. The steel composition and microstructure were examined at the surface layer of castings, at depths of 1mm, by taking successive layers of swarf and analysis. In experiments, the carburizing atmosphere was neutralized, showing that the coating performed efficiently by decomposing almost instantly on heating and liberating $CO_2$. The upper parts of castings obtained using EPS patterns were slightly higher in carbon pick-up than other parts. Comparing the 316L and 304 stainless steel castings, qualitative and quantative differences could be found between the carbon pick-up behaviours as influence of the carbon content and alloying elements. Carbide former such as Cr makes carbon more soluble in the steel. This must make carbon pick-up in the surface layer but at the same time richer in carbon especially in the 304 stainless steel castings.

• Transactions on Electrical and Electronic Materials
• /
• 제15권3호
• /
• pp.159-163
• /
• 2014

More accurate CD (Critical Dimension) control is required for the nanometer-scaled devices. However, since the reflectivity between substrate and PR (Photoresist) becomes higher, the CD (Critical Dimension) swing curve was intensified. The higher reflectivity also causes PR notching due to the pattern of sub-layer. For this device requirement, it was optimized for the thickness, refractive index(n) and absorption coefficient(k) in the bottom anti-reflective coating(BARC; SiON) and photoresist with the minimum reflectivity. The computational simulated conditions, which were determined with the thickness of 33 nm, n of 1.89 and k of 0.369 as the optimum condition, were successfully applied to the experiments with no standing wave for the 0.13um-device. At this condition, the lowest reflectivity was 0.44%. This optimum condition for BARC SiON film was applied to the process for 0.13um-device. The optimum SiON film as BARC to PR and sub-layer could be formed with the accurate CD control and no standing waver for the nanometer-scaled semiconductor manufacturing process.

• 동력기계공학회지
• /
• 제1권1호
• /
• pp.70-79
• /
• 1997

Ni-base self-fluxing alloy powder particles were flame sprayed onto the SS400 mild steel substrate surface. The effects of both substrate temperature and spraying distance on the splat behavior of sprayed particles were examined. The results obtained are summarized as follows: 1) In the splat behavior of Ni-base self-fulxing alloy particles sprayed onto the SS400 mild steel substrate, splashing was observed under the room temperature condition. On the contrary, it showed circular plate pattern in the substrate temperature range over 373K. 2) It was cleared that there was close relationship between mechanical properties of coating layer and splat behavior of sprayed particles. 3) From the experimental results, optimum spraying conditions showed excellent mechanical properties in the case of Ni-base self fluxing alloy sprayed onto the SS400 mild substrate were 473K of substrate temperature and 250mm of spraying distance.