• 한국수소및신에너지학회논문집
• /
• 제29권1호
• /
• pp.105-110
• /
• 2018

The flow boiling heat transfer of water was experimentally investigated on plain and sintered microporous surfaces in a mini-channel. The effects of microporous coating on flow boiling heat transfer of subcooled water were investigated in a 300 mm long mini-channel with a cross section of $20{\times}10mm^2$. The test section has sufficiently long entrance length of 300 mm which provides a fully-developed flow before the channel inlet. The bottom side of the channel was heated by a copper block assembled with a high-density cartridge heater and other sides of the channel were insulated. The microporous surface was fabricated by sintering copper particles with the average particle size of $50{\mu}m$ on the top side of the copper block. Heat transfer measurement was conducted at the mass flux of $208kg/m^2s$ and the heat flux up to $500kW/m^2$. Microporous coated surface showed an earlier boiling incipience compared with plain surface regardless of the mass flux. Microporous coating were significantly attributed to local wall temperature and local heat transfer coefficient for flow boiling.

• Korean Chemical Engineering Research
• /
• 제49권3호
• /
• pp.314-319
• /
• 2011

본 연구에서는 전산유체모사기인 Fluent를 활용하여 slot 다이 내부에서 Newtonian과 non-Newtonian 코팅액의 동적 거동을 고찰함으로써 최적 다이 설계를 위한 방법론을 구축하고자 하였다. 다이 출구에서 코팅액의 속도분포를 일정하게 하기 위해 chamber 구조를 변화시킴으로써 최적 하이브리드 다이의 설계가 가능하였다. 특히, non-Newtonian 유체의 경우, 전단담화 정도와 chamber의 coat-hanger 최적 길이의 상관관계를 도출하였다.

• 설비공학논문집
• /
• 제17권2호
• /
• pp.183-190
• /
• 2005

In the process of ice-slurry making, ice adhesion on cooling wall or in narrow flow Path disturbs continuous ice formation. In this study, the effect on the ice adhesion to cooling surface by some freezing experiments was investigated, quantitatively. Three types of solutions were frozen in various coating vessels with stirring. In the experiment, the ice adhesion between cooling wall and Ice-slurry was evaluated by measuring stirring power. From the result, the stirring power of slurry mixture in PTFE-coating vessel was smaller than those in PE-coating, PFA-coating and bare SUS vessel. Especially, in EG H PG 1.S/ HD 1.5 mass$\%$ solution, the stirring power in the PE-coating vessel was smaller than that in the PFA-coating or SUS vessel.

• 반도체디스플레이기술학회지
• /
• 제2권1호
• /
• pp.25-29
• /
• 2003

The fluid flow, mass transfer, heat transfer and film thickness variation during the spin coating process are numerically studied. The model is said to be I-dimensional because radial variations in film thickness, concentration and temperature are ignored. The finite difference method is employed to solve the equations that are simplified using the similarity transformation. In early time, the film thinning is due to the radial convective outflow. However that slows during the first seconds of spinning so the film thinning due to evaporation of solvent becomes sole. The time varing film thickness is analyzed according to the wafer spin speed, the various solvent fraction in the coating liquid, and the various solvent vapor fraction in the bulk of the overlying gas during the spin coating is estimated.

• 대한기계학회논문집A
• /
• 제39권7호
• /
• pp.687-692
• /
• 2015

자동차 암레스트의 사출성형과 코팅을 동시에 구현하기 위하여 인몰드 코팅 금형을 설계하였다. 개발된 금형은 하나의 코어와 두개의 캐비티를 포함하고 있으며, 캐비티는 기재 캐비티와 코팅 캐비티로 이루어진다. 코어는 가동측 형판에 부착되었으며, 두개의 캐비티는 고정측 형판에서 슬라이딩하는 평판위에 설치되었다. 2 단계 공정으로 이루어지며 가장 먼저 사출성형된 제품은 슬라이딩 평판에 의하여 2 번째 캐비티로 전달되었다. 기재에 적용된 소재는 PC/ABS 이며, 코팅제로는 2 액형 폴리우레탄이 사용되었다. 코팅제의 토출유량을 변경하면서 실험을 수행하였으며, 주제와 경화제의 믹싱특성을 고찰하였다. 토출유량이 증가함에 따라 믹싱이 더욱 향상되었으며, 주입된 코팅제의 중량이 증가할수록 기재 표면에 발생하는 기포가 감소하였다.

• Kyungpook Mathematical Journal
• /
• 제57권4호
• /
• pp.651-665
• /
• 2017

Some computational fluid dynamics problems concerning the thin films flow of viscous fluid with a free surface and draining or coating fluid-flow problems can be delineated by third-order ordinary differential equations. In this paper, the aim is to introduce the numerical solutions of the boundary value problems of such equations by variational iteration method. In this paper, it is shown that the third-order boundary value problems can be written as a system of integral equations, which can be solved by using the variational iteration method. These solutions are gleaned in terms of convergent series. Numerical examples are given to depict the method and their convergence.

• 한국표면공학회지
• /
• 제34권2호
• /
• pp.115-124
• /
• 2001

Gas wiping process of continuously hot-dip galvanized coating on steel strip has noise and coating problems. To improve the qualify of product, characteristics of air flow on the steel surface must be investigated. In this paper, fluid dynamic model of the gas flow is setup and solved numerically using STAR-CD. The effects of edge baffle, distance between steel plane edge and baffle, inlet pressure, and gap between air knife and strip steel surface are investigated, and it is concluded that edge baffle can reduce over-coating and edge built-up.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.88.2-88.2
• /
• 2005

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 1986년도 Priceedings Of The Third Korea-Japan Seminar On New Ceramics
• /
• pp.211-225
• /
• 1986

Silicon carbide coating has been studied using a graphite substrate, a mixture of tetramethylsilane and hydrogen or argon at deposition temperature (T) of 950 to $1200^{\circ}C$ total pressure of 20 to 50 torr and carrier gas flow rate of 0 to 901/h. Deposition kinetic study has shown that a transition, from a surface reaction limited process to a diffusion limited one, takes place near $1100^{\circ}C$. Deposition rate depends directly upon the experimental parameters. The influence of the main process parameters is also discussed to relate the physiochemical properties of the coating to the deposition conditions.

• 한국분말재료학회지
• /
• 제2권3호
• /
• pp.201-207
• /
• 1995

In general, the characteristics of plasma spray coating are strongly dependent on process conditions. In this paper, Mo and Co alloy coating layers were made by plasma spraying with different spray parameters and characterized using X-ray diffraction, scanning electron microscopy(SEM), hardnass test, and wear test. It was found that the coating characteristics were mainly affected by phase composition of the powder, spray distance, arc current, and gas flow rate.