• 한국전기전자재료학회논문지
• /
• 제17권12호
• /
• pp.1356-1361
• /
• 2004

High temperature superconducting coated conductor has a structure of ///. The buffer layer consists of multi-layer, this study reports the deposition method and optimal deposition conditions of YSZ(Yttria-stabilized zirconia) layer which plays a important part in preventing the elements of substrate from diffusing into the superconducting layer. YSZ layer was deposited by DC reactive sputtering technique using water vapor for oxidizing deposited elements on substrate. To investigate optimal thickness of YSZ film, four YSZ/CeO$_2$/Ni samples with different YSZ thickness(130 nm, 260 nm, 390 nm, and 650 nm) were prepared. The SEM image showed that the surface of YSZ layer was getting to be rougher as YSZ layer was getting thicker and the growth mode of YSZ layer was columnar grain growth. After CeO$_2$ layer was deposited with the same thickness of 18.3 nm on each four samples, YBCO layer was deposited by PLD method with the thickness of 300 nm. The critical currents of four samples were 0, 6 A, 7.5 A, and 5 A respectively. This shows that as YSZ layer is getting thicker, YSZ layer plays a good role as a diffusion barrier but the surface of YSZ layer is getting rougher.

• 한국세라믹학회지
• /
• 제47권1호
• /
• pp.82-85
• /
• 2010

Recently, thin film processes for oxides and metal deposition, such as physical vapor deposition (PVD) and chemical vapor deposition (CVD), have been widely adapted to fabricate solid oxide fuel cells (SOFCs). In this paper, we presented two research area of the use of such techniques. Gadolinium doped ceria (GDC) showed high ionic conductivity and could guarantee operation at low temperature. But the electron conductivity at low oxygen partial pressure and the weak mechanical property have been significant problems. To solve these issues, we coated GDC electrolyte with a nano scale yittria-doped stabilized zirconium (YSZ) layer via atomic layer deposition (ALD). We expected that the thin YSZ layer could have functions of electron blocking and preventing ceria from the reduction atmosphere. Yittria-doped barium zirconium (BYZ) has several orders higher proton conductivity than oxide ion conductor as YSZ and also has relatively high chemical stability. The fabrication processes of BYZ is very sophisticated, especially the synthesis of thin-film BYZ. We discussed the detailed fabrication processes of BYZ as well as the deposition of electrode. This paper discusses possible cell structure and process flow to accommodate such films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.960-964
• /
• 2004

[ $Ba_2NaNb_5O_{15}$ ](BNN) thin films have been prepared by the ion beam sputter deposition (IBSD) method on Pt coated Si substrate at temperature as low as $600^{\circ}C$ XRD, SEM were used to investigate the crystallization and microstructure of the films. It was found that the films were crack-free and uniform in microstructure. The electric properties of thin films were carried out by observation of D-E hysteresis loop, dielectric constant and leakage current. It was found the deposition rate strongly influenced the phase formation of the films, where the phase of $BaNb_2O_6$ was always formed when the deposition rate was high. However, the single phase (tungsten bronze structure ) BNN thin film was obtained with the deposition rate as low as $22{\AA}/min$. The remanent polarization Pr and dielectric constant are about 1-2 ${\mu}C/cm^2$ and $100\sim200$, respectively. It was also founded the electric properties of thin films were influenced by the deposition rate. The Pr and dielectric constant of films increased with the decrease of deposition rate. The effects of annealing temperature and annealing time to the crystallization behavior of films were studied. The crystallization of thin film started at about $600^{\circ}C$. The adequate crystallization was gotten at the temperature of $650^{\circ}C$ when the annealing time is 0.5 hour or at the temperature of $600^{\circ}C$ when the annealing time is long as 6 hours.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.193-197
• /
• 2004

The organic light emitting diode (OLED) is proposed as the novel source in the microchip because it has ideal merits (various wavelengths, thin-film structure and overall emitting) for the integration. In this paper, we fabricated the finger-type pin photodiodes for fluorescence detection and the advanced microchip with OLED integrated pn the microchannel. The finger-type in the diode design extended the depletion region and reduced the internal resistance about 31.2% than rectangular-type. The photodiodes had a 100pA leakage current and a 8720 sensitivity $(I_{Light}/I_{Dark})$ at -1 V bias. The interference filter with 32 layers ($SiO_2$, $TiO_2$) was directly deposited on the photodiode. The OLED was fabricated on the ITO coated glass and was bonded with LOC. The application of thin-film OLED increased the excitation efficiency and simplified the integration process extremely. The prototype device of this application had a superior sensitivity of 100nM-LOD in the fluorescence detection.

• 콘크리트학회논문집
• /
• 제15권4호
• /
• pp.522-528
• /
• 2003

콘크리트는 내구성이 우수하여 반영구적인 구조재료로 인식되어 왔으나, 최근에 들어 환경오염으로 인해 콘크리트 구조물의 내구성이 저하되어 사회적 문제가 되고 있다. 이러한 콘크리트 구조물의 성능저하 방지를 위하여 무기질 도료 및 표면처리 시스템을 이용하여 콘크리트 내구성능의 하나인 염해의 열화 방지에 대한 평가와 콘크리트 내구성 평가를 실시하였다. 이온확산 실험결과 도포된 모르타르시편에서 $Cl^-$ 이온의 용출을 억제하여 $Cl^-$ 이온의 투과량, 이온확산계수 및 겉보기계수가 도포되지 않은 모르타르시편보다 작게 나타났다.

• 대한전자공학회논문지SD
• /
• 제45권7호
• /
• pp.1-8
• /
• 2008

본 논문에서는 플라스틱 기판에 OTFT를 스위칭 소자로 사용하여 유연한 EPD 패널을 제작하였다. OTFT의 채널 폭과 길이의 비(W/L)는 EPD의 응답속도를 고려하여 15이상으로 설계를 하였다. 게이트전극은 Al, 절연층은 cross-linked PVP, 반도체층은 펜타센, 중간층은 PVA/Acryl를 사용하였다. 플라스틱 기판은 보호층 처리를 통하여 열처리 공정 시 발생하는 입자를 제거하였고, 거친 표면을 평탄화하였다. 반도체층의 크기는 게이트 전극 보다 작도록 제한하여 누설전류를 줄일 수 있었다. EPD-상판과 OTFT-하판 사이에 픽셀전극을 삽입하고 또한 OTFT-하판을 보호하기 위하여 PVA/Acryl로 구성된 중간층을 상빙하였다. 완성된 OTFT-하판에서 OTFT의 이동도는 $0.21cm^2/V.s$, 전류점멸비(Ion/Ioff)는 $10^5$ 이상의 성능을 보였다.

• Current Optics and Photonics
• /
• 제3권6호
• /
• pp.590-596
• /
• 2019

To improve the color gamut of a liquid-crystal display (LCD), we propose a bandpass filter that is added to the backlight unit to optimize the backlight spectrum. The bandpass filter can only transmit red, green and blue light in the visible range, while reflecting the unwanted light. We study the optical properties of the bandpass filter using the transfer-matrix method, and the effect of the bandpass filter on the color gamuts of LCDs is also investigated. When a bandpass filter based on a 5-layer configuration comprising low and high refractive indices ((HL)²H) is used in phosphor-converted white-light-emitting diode (pc-WLED), K₂SiF₆:Mn⁴⁺ (KSF-LED), and quantum-dot (QD) backlights, the color gamuts of the LCDs improve from 72% to 95.3% of NTSC, from 92% to 106.7% of NTSC, and from 104.3% to 112.2% of NTSC respectively. When the incident angle of light increases to 30°, the color gamuts of LCDs with pc-WLED and KSF-LED backlights decrease by 2.9% and 1% respectively. For the QD backlight, the color gamut almost does not change. When the (HL)²H structure is coated on the diffusion film, the color gamut can be improved to 92.6% of NTSC (pc-WLED), 105.6% of NTSC (KSF-LED), and 111.9% of NTSC (QD). The diffusion film has no obvious effect on the color gamut. The results have an important potential application in wide-color-gamut LCDs.

• 한국재료학회지
• /
• 제23권4호
• /
• pp.211-214
• /
• 2013

The effects of a Ni coating on the sensing properties of nano ZnO:Ni based gas sensors were studied for $CH_4$ and $CH_3CH_2CH_3$ gases. Nano ZnO sensing materials were prepared by the hydrothermal reaction method. The Ni coatings on the nano ZnO surface were deposited by the hydrolysis of zinc chloride with $NH_4OH$. The weight % of Ni coating on the ZnO surface ranged from 0 to 10 %. The nano ZnO:Ni gas sensors were fabricated by a screen printing method on alumina substrates. The structural and morphological properties of the nano ZnO : Ni sensing materials were investigated by XRD, EDS, and SEM. The XRD patterns showed that nano ZnO : Ni powders with a wurtzite structure were grown with (1 0 0), (0 0 2), and (1 0 1) dominant peaks. The particle size of nano ZnO powders was about 250 nm. The sensitivity of nano ZnO:Ni based sensors for 5 ppm $CH_4$ gas and $CH_3CH_2CH_3$ gas was measured at room temperature by comparing the resistance in air with that in target gases. The highest sensitivity of the ZnO:Ni sensor to $CH_4$ gas and $CH_3CH_2CH_3$ gas was observed at Ni 4 wt%. The response and recovery times of 4 wt% Ni coated ZnO:Ni gas sensors were 14 s and 15 s, respectively.

• 한국재료학회지
• /
• 제9권7호
• /
• pp.707-714
• /
• 1999

형광등으로 사용되는 전기 에너지의 40%를 절약할 수 있는 방법으로서 그 반사값을 특수 은 반사박막으로 처리하여 고효율 및 내구성을 갖는 기술이 최근에 알려지고 있다. 이 박막들은 sputtering법을 이용한 것으로 주로 미국에서 생산되어지고 있다. 한편. evaporation 법으로 제작된 은 박막들은 일반적으로 반사효율에는 별문제가 없으나 부착력이 떨어지는 단점이 있다. 우리는 수년간 polyester를 기판으로 하고 몇가지 PVB 방법을 동원하여 고 반사율 및 부착력을 갖는 은경 박막을 확보하기 위해 연구를 해왔다. 그 결과, evaporation 법으로 제작된 은 박막은 96.4%의 반사율을 보이나 부착력은 $12 Kg/\textrm{cm}^2$에 불과함을 확인하였고. sputter 법으로 제작한 시편들의 반사율은 96.3 %로 비슷하였으나 부착력이 /$20 Kg\textrm{cm}^2$로 거의 두배로 뛰어올라 sputter법의 공정조건이 그 결과박막들의 물리적 특성에 미치는 긍정적 영향을 확인할 수 있었다. X-선 회절 분석결과 sputter의 경우에 (111)면이 우선성장함을 알 수 있었고, 시편의 단면으로부터 관찰된 치밀한 columnar 구조가 부착력을 향상시키고 있음이 확인되었다.

• 공업화학
• /
• 제18권4호
• /
• pp.386-390
• /
• 2007

본 연구에서는 분자량이 각각 530, 830, 1000, 1250 그리고 2000인 폴리카프로락톤디올(PCD) 및 분자량이 300과 900인 폴리카프로락톤트리올(PCT)과 헥사메틸렌디이소시아네이트(HMDI)를 이용하여 폴리우레탄 프리폴리머를 중합하였다. 이 프리폴리머들을 2단계 현탁 중합반응을 통하여 폴리우레탄 비드들을 제조하였다. 비드들의 입도는 입도분석기를 이용하여 분석 하였으며, 비드들의 입자직경은 $10{\sim}30{\mu}m$이었다. 중합된 폴리우레탄 비드들의 구조는 FT-IR 스펙트럼 분석으로 확인하였고, TGA를 이용하여 열적 특성을 분석하였다. $T_g$는 $-23{\sim}-53^{\circ}C$ 범위이고, PCD의 분자량이 증가할수록 폴리우레탄 비드의 $T_g$는 다소 감소하였다. 폴리우레탄의 비드의 응집방지를 위해 테트라에톡시실란(TEOS)로 코팅하여 폴리우레탄 비드/실리카 복합물을 제조하였다.