• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.435-442
• /
• 2021

This study was conducted to determine an appropriate coating method for mechanized sowing of small and light Italian ryegrass seeds. In the case of manufacturing coated seeds, 2% PVA was superior as an adhesive compared to PVP and Tween80. Calcium carbonate + talc adhered to the seeds smoothly and well and the seed weight was higher than that of the other coating materials. The germination percentage of seeds coated with calcium carbonate + talc was 95.8%, which was not significantly different from 96.5% of the control group, but the mean daily germination was the highest. As the coverage ratio of calcium carbonate + talc increased, the strength tended to increase when coated at 1.5 times the seed weight. There was no difference in the germination rate and plant height compared to the control group according to the coverage ratio.

• Korean Journal of Plant Taxonomy
• /
• v.53 no.2
• /
• pp.102-109
• /
• 2023

The basic information of ovule and seed characteristics was investigated for five monotypic and endemic genera in the Korean peninsula as categorized by the Flora of Korea category. The carpels and seeds were sectioned with a rotary microtome. Mature seeds were coated with platinum using an ion sputter and observed using a scanning electron microscope. As a result, Abeliophyllum was found to be anatropous and a unitegmic ovule, with a slightly colliculate seed surface and exotestal seed coat type. The ovule of Coreanomecon was anatropous and bitegmic, having a distinct echinate seed surface, and exo-endotestal seed coat type with a prismatic crystal in the mesotesta. The ovule of Hanabusaya was anatropous and a unitegmic, with a long reticulate seed surface sculpture, and distinct exotestal seed coat type. In addition, a wing developed at the opposite side of the raphe bundle. Megaleranthis was an anatropous and bitegmic ovule, having a small pentagonal disk shape, a concave seed surface and exotestal seed coat type. Finally, Pentactina was also anatropous and a unitegmic ovule, reticulate seed sculpture, and endotestal seed coat type. These data will be proving to be a source of good information for securing bio-sovereignty in the near future.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.16 no.1
• /
• pp.17-24
• /
• 2014

The experiment was conducted at the growth chamber to determine germination, seedling growth and fresh weight between the untreated control and iron-coated seeds in germination test of the rice seeds. There was of 95% germination in rice seeds regardless of treatments and days for seedling emergence was relatively 13-14days. Seedling height was 4.9cm of the iron-coated seeds but 0.4cm of the untreated control and there was 6.S roots of seedling in iron-coated seeds and 5.5 roots of seedling in the untreated control, respectively. The fresh weight of seedling was 107mg of the iron-coated seeds and 66mg of the untreated control at 35days after sowing.

• Journal of Korean Society of Forest Science
• /
• v.109 no.1
• /
• pp.41-49
• /
• 2020

In this study, the effect of seed pre-treatments and pellet coating materials to enhance the efficiency of large-scale propagation of Aster koraiensis seeds were investigated. Seeds were immersed in water for one day, and only those that sank were used for pre-treatment to use filled seeds. Pre-treatments were divided into hormone treatments, with gibberellic acid (GA₃; 200 and 500 ppm) and 24-epibrassinolide (10^-6, 10^-7, and 10^-8M), and priming with potassium nitrate (100 mM of KNO₃). To produce pellet-coated seeds, pellet materials (DTCS or DTK) were applied to control (unprimed) and primed seeds with binders (PVA or CMC). The maximum germination percent (GP) of seeds before pellet coating was 65% (with the priming treatment), and there was no difference in the GP of seeds among hormone treatments. For seeds sown in a growth chamber on filter paper, GP was 41% for control (unprimed/uncoated) seeds, 65% for uncoated primed seeds, 71% for DTCS/PVA-pellet-coated seeds, and 42% for DTK/CMC-pellet-coated seeds. Seeds that were primed first and then pellet-coated showed greatly improved GP, mean germination time (MGT), and germination rate than seeds that were only pellet-coated. For seeds sown in commercial soil in a greenhouse, control seeds had a GP of 27%, whereas primed seeds had the highest GP (58%), and their MGT and GT were 9.4 days and 7.0%·day, respectively. In addition, DTK/PVA-pellet-coated seeds (40%) also had a GP higher than the control (27%), and their MGT was 15-27 days. For seeds sown in sandy-loam soil in a greenhouse, unprimed-pellet-coated seeds and primed-pellet-coated seeds both had GPs ranged of 39%, which were lower than that of control seeds. In general, the seeds that were pellet-coated with DTK had a higher GP than those pellet-coated with DTCS. Furthermore, the MGT of unprimed-pellet-coated seeds was 15.0-19.8 days, which was longer than the MGT of primed-pellet-coated seeds. These results suggest that priming enhances seedling emergence of Aster koraiensis seeds. Moreover, when priming is combined with pellet coating, DTK is a more suitable pellet material than DTCS, and PVA and CMC are equally suitable adhesives.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.29-32
• /
• 2015

Two-dimensional electrophoresis (2-DE) was executed to separate the seed storage proteins from the buckwheat. The proteins extracted from the whole seed proteins were better separated and observed in the use of lysis buffer. Using this method, the highly reproducible isoelectric focusing (IEF) can be obtained from polyacrylamide gels, and IEF from the polyacrylamide gel at all the possible pH range (5.0-8.0) was more easily separated than IPG (immobilized pH gradient) gels. The polyacrylamide gels in the first dimension in 2-DE was used to separate and identify a number of whole seed proteins in the proteome analysis. In this new apparatus using 2-DE, 27cm in length of plate coated with polyacrylamide gel was used and the experiment was further investigated under the various conditions.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.432-434
• /
• 2009

Metal nano-wire arrays on Cu-coated seed layers were fabricated by aqueous solution method using sulfate bath at room temperature. The seed layers were coated on Anodic aluminum oxide (AAO) bottom substrates by electrochemical deposition technique, length and diameter of metal nano-wires were dominated by controlling the deposition parameters, such as deposition potential and time, electrolyte temperature. Anodic aluminum oxide (AAO) was used as a template to prepare highly ordered Ni, Fe, Co and Cu multilayer magnetic nano-wire arrays. This template was fabricated with two-step anodizing method, using dissimilar solutions for Al anodizing. The pore of anodic aluminum oxide templates were perfectly hexagonal arranged pore domains. The ordered Ni, Fe, Co and Cu systems nano-wire arrays were characterized by Field Emission Scanning Electron Microscopy (FE-SEM) and Vibrating Sample Magnetometer (VSM). The ordered Ni, Fe, Co and Cu systems nano-wires had different preferred orientation. In addition, these nano-wires showed different magnetization properties under the electrodepositing conditions.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1240_1241
• /
• 2009

In this paper, sol-gel-spin coated $Pb(ZrTi)O_3$ thin film with $ZrO_2$ buffer-layer and $PbTiO_3$ seed-layer was investigated for vibration MEMS energy harvester to scavenge power from ambient vibration via d33 piezoelectric mode. Piezoelectric thin film deposition techniques on insulating layer is the important key for $d_{33}$ mode of piezoelectric vibration energy harvester. $ZrO_2$ buff-layer was utilized as an insulating layer. $PbTIO_3$ seed-layer was applied as an inter-layer between PZT and $ZrO_2$ layer to improve the crystalline of PZT thin film. The fabricated PZT thin film had a remanent polarization of 5.3uC/$cm^2$ and the coercive field of 60kV/cm. The fabricated energy harvester using PZT thin film with PTO seed-layer generated 1.1uW of electrical power to $2.2M{\Omega}$ of load with $4.4V_{pvp}$ from vibration of 0.39g at 528Hz.

• Food Science and Preservation
• /
• v.7 no.1
• /
• pp.12-18
• /
• 2000

As am economical and effective way of antimicrobial film fabrication , antimicrobial agents were coated on the LDPE film with a binder mediu. the fabricated films were then applied tomodified atmosphere packaging of fresh strawberries. A binder of polyamide was selected for the coating medium, based on the stability in water. 1% grapefruit seed extract-coated film showed the antimicrobial activity on the plate media against EScherichia coli, Staphylococcus aureus, bacillus subtilis , Bacillus cereus, Leuconostoc mesenteroides, Micrococcus flavus, Saccharomyces cerevisiae, while one with 10% Coptis chinesis extract inhibited only M. 림편 and one coated with 10% rheum palmatum extract did not inhibit any of 10 strains tested. The packages of fresh strawberries by using antimicrobial agents-coated films created the gas compositions of O2 1.4-5.5% and CO2 5.7-7.9%, and contributed to reduced growth of total aerobic bacteria and yeast/molds on the produced. However, their lower microbial count was not correlated directly with the reduced decay of the fruits.

• Journal of Radiation Industry
• /
• v.8 no.3
• /
• pp.141-146
• /
• 2014

Nickel (Ni) electroplating was implemented by using a metal Ni powder in order to establish a $^{63}Ni$ plating condition on the PN junction semiconductor needed for production of beta-voltaic battery. PN junction semiconductors with a Ni seed layer of 500 and $1000{\AA}$ were coated with Ni at current density from 10 to $50mA\;cm^{-2}$. The surface roughness and average grain size of Ni deposits were investigated by XRD and SEM techniques. The roughness of Ni deposit was increased as the current density was increased, and decreased as the thickness of Ni seed layer was increased. The results showed that the optimum surface shape was obtained at a current density of $10mA\;cm^{-2}$ in seed layer with thickness of $500{\AA}$, $20mA\;cm^{-2}$ of $1000{\AA}$. Also, pure Ni deposit was well coated on a PN junction semiconductor without any oxide forms. Using the line width of (111) in XRD peak, the average grain size of the Ni thick firm was measured. The results showed that the average grain size was increased as the thickness of seed layer was increased.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.13 no.1
• /
• pp.19-26
• /
• 2011

The machine transplanted rice has highly extended in the Republic of Korea due to a wage rise since 1976 and thus rice seedling raising nursery method has shifted from field into polyethylene film house. The rice seedling grown under a polyethylene film house was weak and tall because of limited sunlight and wind and so there was so complained among rice growing farmers in terms of missing hill and broken seedling after machine transplanting. In recent iron-coated seedling has reported on healthier and stronger than that of polyethylene film house. These seedlings were more stiff and thus more easy to handle during transplanting and less missing hills. The Iron-coated seed was proven to more stiff like seedling height, root growth and weight of shoot and root growth. This was more convenient during transfer of seedling raising box im machine transplanting. Thus, this study was carried out to grow a stiff and healthy seedling growth and development for machine transplanting. There were a normal seed germination and sprouting after iron-coated seeds treatment and this seedling was smaller and stiffer than that of untreated control. The leaf number and root growth of seedling which was iron-coated seeds would be better and total seedling fresh weight was greater than that of untreated control.