• 대한치과보철학회지
• /
• 제45권3호
• /
• pp.303-309
• /
• 2007

Statement of problem. The effect of gold electroforming on gold alloy was not studied. Purpose. This in vitro study investigate the effect of gold electroforming on gold-silver-palladium alloy. Material and methods. Three pieces of gold strips had undergone the electroforming procedures on one side and then half of the side again electroformed. The set mode for this study was program 1 ($200{\mu}m$). And the processing time was 15min (1/20 time to form $200{\mu}m$ coping). The confocal laser scanning microscope (PASCAL 5, Carl Zeiss, Bernried, Germany) was used to measure the thickness of the pure gold layer electroformed on the gold strips. Half of the gold strip was coated two times with electroformed gold, and the other half one time. The data from the cone focal laser system was processed to get the vertical profile of the strips and the difference of the vertical height between the double coated and single coated layer was regarded as the thickness of the gold coating. The layer thickness value to built 3D image of the cone-focal laser was set $0.5{\mu}m$. Next to the measurement of the thickness of the coating, the Vicker's hardness test was done. It was performed on the double coated surface, single coated surface and non-coated surface (back side) three times each. Results. The mean thickness value gained from gold electroforming technique was measured to be $22{\mu}m$ for sample 1, $23{\mu}m$ for sample 2, $21{\mu}m$ for sample 3. In the same condition of time, power and the amount of electrolyte, the data showed no difference between samples. According to the results of variance analysis, the differences among the variations in number of coating were statistically insignificant (p>0.05), meaning that the two times of gold electroforming coating did not change the hardness of gold-silver-palladium alloy. Conclusion. The test of thickness of gold coating proved the coherency of the gold electroforming procedure, in other words, when the power, the exposed surface area, processing time and the amount of electrolytes were set same, the same thickness of gold would be coated on. The hardness test showed that the electroformed gold coating did not change the hardness of the gold-silver-palladium alloy when it is coated not more than $45{\mu}m$.

• 비파괴검사학회지
• /
• 제19권3호
• /
• pp.189-199
• /
• 1999

산화막이 피복된 원전 연료봉의 원통형 쉘에 대한 공명산란 해석을 수행하고 원주파 전파 특성을 연구하였다. 피복 쉘에 대한 산란 음압의 정규 모우드 해를 구하였고 최근에 새롭게 제안된 고유 배경음압 계수를 이용하여 피복 쉘의 순수 공명 신호를 분리하였다. 12%의 상대 두께를 갖는 원통형 피복 쉘에 대하여 산화막 두께 증가에 따른 공명 원주파의 전파 특성을 해석하였다. 산화막의 존재와 그 두께가 증가할 때 정규 모우드의 차수에 따라 원주파의 전파 특성이 크게 변화한다. 제 1차 반대칭 ($A_1$) 원주파에서 특정 부분파의 위상속도는 산화막이 존재하고 그 두께가 증가함에도 불구하고 위상속도가 일정 한 특성을 보인다. 공명신호를 분리하고 공명 모우드를 확인하는 실험을 수행하여 $A_1$ 원주파의 전파 특성을 확인하였다. $A_1$ 원주파의 위상속도 일정 특성을 이용함으로써 산화막의 두께를 상대적으로 측정 할 수 있는 새로운 비파괴 평가방법을 제안하였다.

• 한국물환경학회지
• /
• 제26권3호
• /
• pp.454-459
• /
• 2010

This study investigated the applicability of manganese coated media such as manganese coated sand (MCS), manganese coated sericite (MCSe) and manganese coated starfish material calcined at $550^{\circ}C$ (MCSf) to remove Mn(II) in synthetic wastewater. Manganese coated media prepared at different pH was applied in the treatment of soluble Mn(II) in batch and column experiments at various Mn(II) concentrations. The amount of Mn coated on three different media was approximately 800~1100 mg/kg. From the stability test, negligible dissolution of Mn was observed above pH 3.0. In batch test, more than 40% of Mn(II) was removed by all sand media at various manganese concentrations. In order to see the effect of additional oxidant for the removal of Mn(II), 4 mg/L of hypochlorite was added in Mn(II) solution during column experiment. Breakthrough of Mn(II) was greatly retarded in the presence of hypochlorite in all column reactors packed with different media. Among the manganese coated media, MCSf prepared at pH 4 indicated the highest removal capacity. The removal efficiency of Mn(II) was also increased in the multi-layer system (0.5 g of MCS, MCSe, and MCSf each).

• 펄프종이기술
• /
• 제43권3호
• /
• pp.30-34
• /
• 2011

This study was carried out in order to evaluate the effect of coated weight and calender pressure on conductivity of printed RFID tags. The printed RFID tags have been manufactured with gravure printing and it has been well known that the efficiency of printed RFID tags is influenced by surface properties of substrate. In this study, coated paper was prepared with four different coated weight and three different calender pressure. After printing conductivity ink on coated paper, surface resistance was measured to evaluate the efficiency of the printed RFID tag. It was found that, with increasing of coated weight and calender pressure, the paper gloss, smoothness, brightness and gravure printability were improved while the surface resistance of the printed RFID tag was decreased.

• 수산해양교육연구
• /
• 제22권4호
• /
• pp.501-507
• /
• 2010

The ceramic contained paint was made to replace the lead sinker for gill-net with coated lead sinker. The ceramic contained paints were coated in various conditions on the lead sinker with 19g of weight and the optimal coating condition was studied. The adaptability of the coated lead sinker was checked through the anti durability test and fishing operation with gill-net. The case of "Main material 70 wt% + Urethane thinner 30 wt% (Main material 700 $m{\ell}$ + Thinner 300 $m{\ell}$)" showed the best in the coating characteristics depending on the combination ratio of the ceramic paint contained. The coated lead sinker dried at $100^{\circ}C$ inside oven was superior to the drying in the room temperature in its surface glossiness and anti durability and faster drying time than the one dried in normal temperature. The quadruple layers of coating on lead sinker with 4 times of dipping and drying application showed the super anti durability in the coating characteristics depending on the frequency of dipping. When press is applied to the coated lead sinker, the coated layer is not detached from the sinker. In addition, the coated lead sinker was not damaged or peeled at the fishing operation about 2 months in various depths within 50m and by the materials at the bottom (sand, stone and gravel stone) and it was in good condition.

• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.289-293
• /
• 2010

To investigate the corrosion behavior of tools steel surface in various coating film, the surface of hard coated Ti-Zr-N film on the tool steel by using magnetron-sputtering methods was researched using various experimental methods. STD 61 steels were manufactured by using vacuum furnace and solutionized for 1hr at $1050^{\circ}C$. Steel surface was coated with Ti-Zr-N film at $150^{\circ}C$ and 100W for 1h by using DC-sputtering equipment. Surface characteristics of Ti-Zr-N film coated specimens were investigated by OM, XRD, FE-SEM and nano-scratch tester. And corrosion behaviors of the coated specimen were investigated by polarization test and electrochemical impedance spectroscopy(EG&G Co, PARSTAT 2273. USA). It was found that Ti-Zr-N film coated sample had a thick coated layer and showed a good wear resistance and corrosion resistance of surface compared with ZrN and TiN coated sample. The corrosion resistance and mechanical property of Ti-Zr-N film coated STD 61 alloy increased as sputtering time increased.

• 한국결정성장학회지
• /
• 제16권3호
• /
• pp.116-120
• /
• 2006

반도체 드라이 에처 시스템의 웨이퍼 정전기 척에 적용하기 위해 플라즈마 스프레이 방법으로 Al-60 계열 기판에 코팅한 $Al_2O_3$ 코팅 막의 특성을 조사하였다. 시편 뒷면에 냉각봉이 장착되었을 때와 없을 때, 용사거리와 분말공급량을 변형하면서 $Al_2O_3$ 막 코팅을 하여 시편을 제작 하였다. 시편 뒷면에 냉각봉이 없을 때는 크랙과 기공이 많이 발생하였다. 시편 뒷면에 냉각봉을 장착하고 분말공급량을 15g/min로 한 경우에 용사거리 60, 70, 80mm에 따른 $Al_2O_3$ 코팅에서는 크랙과 기공은 거의 찾아볼 수 없었다. 용사거리 변화에 따른 $Al_2O_3$ 막 코팅의 표면형태 변화는 없었다. 같은 공정조건에서 분말 공급량을 20g/min로 한 경우에도 크랙은 볼 수 없었으나 약간의 기공이 생겼고, 분말공급량을15g/min로 하였을 때 보다 작은 입자들이 많이 증착되었다. 시편 뒷면에 냉각봉이 없을 때가 시편 뒷면에 냉각봉이 장착된 경우에 비하여 증착 속도가 빨랐다.

• Transactions on Electrical and Electronic Materials
• /
• 제17권3호
• /
• pp.159-162
• /
• 2016

We studied an electrolyte-dielectric metal (EDM) device based on a Si₃N₄ layer-coated anodic aluminium oxide (AAO) template for chemical sensors. The AAO templates were fabricated using a two-step anodization procedure at 0℃ and 70 V in 0.3 M oxalic acid, after which the Si₃N₄ was deposited on them using plasma enhanced chemical vapor deposition (PECVD). The average pore size was approximately 106 nm and the depth of the AAO templates was 24.6 nm to 86.5 nm. The Si₃N₄ layer-coated AAO is more stable than a single AAO template.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.671-676
• /
• 1998

This study deals with the effect on penetration properties of siliceous ion througth the mortar applicated by the waterproofing coating materials of siliceous seler liquid type. The tests of properties for reinforcing effect in mortar substrate surface layer are five kinds of water permeability, absorption, compressive strength, surface layer strength, pH content and chemical attack effect. Water permeability of mortar coated siliceous sealer in very than that of plane mortar. compressive strength of mortar coated siliceous sealer in larger than that of plane mortar about 10%.

• 한국표면공학회지
• /
• 제30권3호
• /
• pp.167-174
• /
• 1997

WC-C0 base cemented carbides were plasma nitrided to obtain more hadened surface layer. The surface hardness of Hv1338 which is higher than a non-treated ane by 30%, and the hardened layer thickness of about 50$\mu\textrm{m}$ were obtained by the treatment of 3hrs under the conditions of $550^{\circ}C$, and 5torr of gas pressure of which composition was 1:1 of $N_2:H_2$. The nitrided surfaces has WIN and W2N phases in the non-coated samples and AIN phase in the alumina coated sampled as the results of X-ray results, and showed surface roughnness of 5$\mu\textrm{m}$ which were caused by the sputtering action of the plasma gasee. The hardenened layer exihibits an enhanced wear resistance the cuttability test.