• 펄프종이기술
• /
• 제34권2호
• /
• pp.13-21
• /
• 2002

A new method for measuring fiber length and fiber coarseness was developed using image analysis technique. Measured fibers were transferred to a glass slide on a filter paper placed on a wire of the laboratory paper machine. After staining the fibers on the slide, mean fiber lengths and coarseness were measured by a commercial image analysis software, named KS400. The resultant data obtained from the image analysis displayed a close correlation with those from FS-200 and also showed excellent reproducibility as well as those from FS-200. The length of synthetic fibers over 10 mm long could be readily measured by this new analysis technique. Finally, a substantial improvement in precision for measuring fiber length and coarseness was made with less operator's effort for a given time.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.202-208
• /
• 2003

This study carried out a cutting experiment on Duralumin A16061-76, which is light but strong and highly anticorrosive, so recently popular as a lightweight material, by changing cutting conditions and alternating 4 insert tips, and examined the effect of each insert tip on cutting force at certain cutting conditions, the measurements of the coarseness of processed surfaces roughness, and the chip workability. The 1311owing conclusions were drawn from the results. Cutting force for cutting tool is when insert tips were alternated at each cutting condition, the cutting force of cutting tools was highest then CBN tools were use(1 next by Ceramic tools, Cermet tools, and WC tools. Therefore, WC tools are considered most suitable for cutting Duralumin A16061-T6. Surface roughness as for the coarseness of surfaces according to insert tips applied to Duralumin A16061-T6 under the cutting condition of depth of cut below 1mm, feed rate below 0.24mm/rev and cutting speed over 100m/min the coarseness of material surface roghness appeared to be finest when WC tools were used, next by Ceramic tools, Cermet tools, and CBN tools.

• 한국축산식품학회지
• /
• 제38권3호
• /
• pp.606-614
• /
• 2018

It is important to understand how marbling traits and tenderness differ among beef steaks from the carcass grading site and other regions within the longissimus thoracis (LT) muscle, as these characteristics are closely associated with consumer acceptability and willingness to purchase. Thus, the aim of this study was to compare the marbling fleck traits and objective tenderness parameters in the groups classified by the coarseness index (CI) of marbling fleck (high and low groups) at the carcass grading site ($13^{th}$ thoracic vertebra; 13T) and three different locations (13T, 9T, and 6T) within the LT muscle from well-marbled (marbling score 7 to 9) Hanwoo steer. Image analysis showed that the longitudinal locations had a significant effect on marbling fleck traits. The total area of large marbling fleck divided by the total marbling area (coarseness) was higher at the central region (13T to 12T) compared to the front thoracic region (6T to 5T) in the high CI group (0.23 vs. 0.17, p<0.05), whereas no significant differences were observed in the total number of marbling fleck within the LT muscle in the high or low CI groups (p>0.05). Location effect on objective tenderness parameters within the LT muscle was somewhat limited, although the high CI group had a lower Warner-Bratzler shear force (WBS) value than did the low group (p<0.05). Taken together, the degree of coarseness of marbling fleck decreased from the carcass grading site to the front thoracic site, whereas the objective tenderness parameters, including WBS and hardness, of the grading site did not differ from the other regions within the LT muscle.

• 한국인쇄학회지
• /
• 제18권1호
• /
• pp.95-102
• /
• 2000

This paper presents the second part of a study of deinking using wort. Physical properties of deinked pulps such as tensile strength, bursting strength and tearing resistance were investigated. In order to analyze the properties, the fiber length and coarseness of deinked pulp was also measured. Results of deinking experiments showed that the deinking efficiency of enzyme treatments was higher than that of chemical treatments in strength properties such as tensile strength, bursting strength and tearing resistance on the the whole. we think that the reason why is that the fiber length and coarseness of deinked pulp with wort are more increased and decreased than those of deinked pulp with chemicals individually.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.149-152
• /
• 1999

A new process for deinking of colored offset newsprint, i.e. enzyme treatment in cooperation with ultrasonic wave was developed in the present study. The physical characteristics such as fiber length, coarseness, crystallinity index of the deinked pulps were investigated and the sugar residues released from the treatment were analyzed. It was found that colored offset newsprint could be deinked effectively by cellulase treatment when ultrasonic wave was applied. The brightness increased by 5% ISO over that of control experiment and the pigment content was reduced markedly. Though the ultrasonic wave had little effect on the strength and crystallinity of the pulp, the treatment of enzyme combined with ultrasonic wave reduced the coarseness and fiber length to some extent. It was also found that ultrasonic wave could accelerate the hydrolysis of cellulose and hemicellulose during the cellulase treatment.

• 대한의용생체공학회:의공학회지
• /
• 제21권4호
• /
• pp.419-431
• /
• 2000

본 논문에서는 디지털 스캔 컨버터(DSC, digital scan converter)에 의한 왜곡이 근본적으로 발생하지 않는 새로운 초음파 영상 방법으로서 표시장치의 화소에 직접 수신 집속하는 기법(DPBF, display-pixel-based focusing)과 이를 구현하기 위한 초음파 영상 장치의 구조를 제안한다. 제안한 기법은 극 좌표에 위치하는 샘플링 점들 대신에 직각좌표상의 화소들에 직접 수신 집속 함으로써 DSC의 역할을 제거하였다. DPBF 기법을 적용한 영상에는 DSC에 의한 허상 및 구획화 현상 등이 나타나지 않으며, 일반적인 방법에 의한 영상에 비해 보다 세밀한 영상을 제공한다는 사실을 검증할 수 있었다. 본 논문은 DSC에 의한 보간 효과가 두 개의 비교 영상 A, B 간에 미치는 정도를 정량적으로 평가하기 위해서 영상거침 비(ICRA/B, Image Coarseness Ratio)를 새로운 성능 측정 방법으로 정의하였다. 이 ICRA/B를 이용하여 비교 영상간 거친 정도를 정량적으로 측정하였다.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.105-113
• /
• 2016

OBJECTIVES : This study is to develop the optimum mixing proportions for cement concrete pavement with using recycled aggregates. METHODS : The mixture varied recycled coarse aggregates content from 50 % to 100 % to replace the natural coarse aggregates by weight. Tests for fundamental properties as a cement concrete pavement were conducted before and after hardening of the concrete. RESULTS : It was found that the variation in the amount of the recycled aggregate affected the compressive and flexural strength development, as well as the chloride ion penetration resistance. As the amount of the recycled aggregate content increased the compressive and flexural strength and the resistance to chloride ion penetration decreased. However, the resistance to freeze-thaw reaction was affected significantly. In addition, the gradation of the aggregate became worse and hence so did the coarseness factor as the recycled aggregate amount increased. CONCLUSIONS : The fundamental properties of the concrete with recycled aggregate does not seem to be appropriate when the recycled aggregate quality is not guaranteed up to a some level and its replacement ratio is over 50%. The optimized gradation of the aggregates should also be sought when the recycled aggregate is used for the cement concrete pavement materials.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 추계학술대회
• /
• pp.52-57
• /
• 1994

간 기능 진단에 초음파 영상이 가장 많이 이용되고 있다. 간이 나빠지면 간 표면의 입자가 굵어지고 이것이 영상에서는 밝기(intensity)와 입자의 거칠기(Coarseness)가 높아지는 등의 특성이 나타난다. 진단에 사용되는 인자는 표면의 거칠기와 밝기 외에도 소엽의 크기와 모양 그리고 문맥 혈관의 크기 등도 고려가 된다. 초음파상으로 이러한 크기와 모양의 구분은 그렇게 어렵지 않다. 그러나, 영상의 밝기와 거칠기의 미세한 변화는 구분하기가 어렵다. 본 연구는 밝기와 거칠기를 나타내는 변수를 제시하고 이를 기준으로 간 질환을 분류하였다. 간 조직의 거칠기에 따라 크게 정상(Normal), 만성 간염(Chronic), 간경변증(Cirrhosis) 세단계로 질환의 상태를 진단하고 영상의 밝기에 따라 다른 간질환과 지방간(fat liver)을 구별해 낸다. 본 분석에 이용된 임상 영상은 주로 만성 간염과 간경변증을 갖고 있는 환자들의 것과 약간의 지방간 영상들이다.

• 대한기계학회논문집B
• /
• 제20권9호
• /
• pp.3015-3029
• /
• 1996

The notion of effective transport property of a heterogeneous medium implies that the medium is large enough that the ergodic theorem holds and local fluctuation of the property can be neglected. In case that the medium is not large enough compared to its characteristic microstructure length scale, the effective property fluctuates and differs from the value of the medium being large enough. As a representative transport phenomenon, diffusion was considered and the fluctuation of varying effective diffusion property, diffusion coarseness $C_k$, was defined as a quantifying parameter. Scaled effective diffusion property, $^*$>/k$_1$ and $C_k$ were computed for the two phase random media consisting of matrix of diffusion coefficient k$_1$ and spheres of diffusion coefficient k$_2$. Numerical simulations were performed by use of the so-called first passage time technique and data were collected for existing microstructure models of hard spheres(HS), overlapping spheres(OS) and penetrable concentric shells(PCS).

• 펄프종이기술
• /
• 제38권3호
• /
• pp.29-37
• /
• 2006

To use bamboo in the pulp industry, the anatomical characteristics of 60-day-old, 1-year-old, 2-year-old, and 3-year-old moso bamboo (Phyllostachys pubescens Mazel), and the characteristics of fiber and sheet of alkali pulp made of moso bamboo were investigated. Moso bamboo is composed of metaxylens and parenchyma cells in the inner part of the wall, and thick-walled small bundle sheathes near the outer walls. Moso bamboo showed the heterogeneity in anatomical structure. The longest fibers were shown in the middle part, and the widest width in the inner part. The lignin contents were 14.4% in 60-day-old bamboo, which was not lignified yet. The lignin contents in bamboo above 1 year were approximately 35%. The yields of alkali pulp of moso bamboo were in the range between 41 and 47%, and the yields tend to decrease with the increase of ages. The lignin contents of 60-day-old bamboo were 2.1% and those of bamboo above 1 year showed approximately 4% to 5% increment. The length, width, and curl index of fiber in alkali pulp appeared to be similar in all ages. However, coarseness increased slightly with the increase of bamboo ages. The distribution of long fiber was shown much in 60-year-old bamboo. The optical and mechanical properties of moso bamboo tended to decrease with the increase of bamboo age.