• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.168-175
• /
• 2008

The method of reinforced earth walls has grown remarkably and the frequency of utilization has been increased on a national scale thereafter introduced in the middle 1980s in Korea. Furthermore the construction case of the extensive Geosynthetic-Reinforced Segmental Retaining Walls had been increased. Currently, the design criterion of FHWA and NCMA mainly used in Korea suggest determining the horizontal distance of the upper/lower retaining wall based on the study results of the internal stability and the external stability of Segmental Retaining Walls but in many cases are not suitable for the actual situation in Korea. Therefore, in this study reviewed the design criterion of Geosynthetic-Reinforced Segmental Retaining Walls, performed the internal and external stability in Paju, Gyeonggi-do based on the design criterion of FHWA and NCMA, suggested the modified design criterion of FHWA with analyzing the results, and performed the stability analysis for the internal and external stability and the compound failure. Moreover for the confirmation of the modified FHWA design standard, the suggestion and the analysis of the numerical analysis approaching method using shear strength reduction technique were performed and the design cases utilized the modified FHWA design standard based on the study analysis were introduced.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권5호
• /
• pp.440-446
• /
• 1997

This research has been performed for the fabrication of high quality ferrite plastic magnet. The magnetic properties of S $r_{5.9}$F $e_2$ $O_3$ ferrite bonded magnets by injection moulding with a variety of applied magnetic field were investigated. 0.3wt% CaCO3, 0.2wt% $SiO_2$, 0.5wt% $Al_2$ $O_3$and 0.5wt% N $a_2$ $SiO_3$are added in order to improve the magnetic properties of Sr-ferrite plastic magnets during the powder fabrication. For carbon coating on chemical compound specimen, 5wt% polyvinyl alcohol is added, and then calcinated under $N_2$ environment of 12$25^{\circ}C$. The particle size is distributed from 0.9~1.2${\mu}{\textrm}{m}$ which approximates to the single domain. The obtained Sr ferrite powder is well mixed with silane coupling and calcium stearate of 1wt%. Nest, the specimen is pelleted after kneading each of them with polyamidel2 as a binder. When the temperature of injection and mould were 25$0^{\circ}C$ and 8$0^{\circ}C$ respectively at injection pressure of 200kgf/$\textrm{cm}^2$, the degree of orientation was 85.3% under the applied magnetic field of 12kOe. As the results, when the packing density of Sr ferrite powder was 90wt%, the magnetic properties of Sr ferrite bonded magnet were follows : $_{B}$ $H_{c}$=2.41kOe, Br=3.1kG, (BH)$_{max}$=2.21MgOe. Especially, the Sr-ferrite bonded magnet with 10wt% N $d_2$F $e_{14}$B additive were as follows : $_{B}$ $H_{c}$=2.57kOe, Br=3.14kG and (BH)$_{max}$=2.39MGOe.GOe.GOe.GOe.e.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.189-192
• /
• 2004

To improvement life-time of the organic light emitting diodes(OLEDs). We investigate the inorganic composite film based on MgO and $SiO_2$ to protect from the moisture and oxygen. The inorganic composite films are added the base materials to the co-operate materials using the mixed process and it is deposited on plastic substrate by e-beam evaporator. In order to analyze as kinds of inorganic materials, Water Vapor method of Transmission Rate (WVTR) and Oxygen Transmission Rate (OTR) are measured by Permatran equipment(MOCON Corp.). For comparison. an MgD- and $SiO_2$-based composite film has lower values of WVTR and OTR than inorganic composite/compound films of ones. The results obtained here shows that this film is suitable for passivation layer to extend the life-time of OLEDs.

• ALGAE
• /
• 제34권2호
• /
• pp.163-175
• /
• 2019

To compare the nutritional quality of TPG (Teleaulax / Plagioselmis / Geminigera) clade species of cryptomonads with that of RHO (Rhodomonas / Rhinomonas / Storeatula) clade species 6 Teleaulax amphioxeia (TA) and 1 Rhinomonas sp. strains were mass-cultured in newly designed 500-L photobioreactors to the end of exponential growth phase. Intraspecific variations (IVs) in terms of one standard deviation among the 6 TA strains in the compositions of the three macronutrients were 41.5 (protein), 89.8 (lipid), and 15.6% (carbohydrate) of the mean. When harvested from stationary growth phase mean compositions of essential amino acids (EAAs, 47.3%) and non-EAAs (52.7%) of the 2 TA strains, CR-MAL07 and CR-MAL08-2, were similar to those of a Chroomonas strain. The IVs between the 2 TA strains in the composition of EAAs (10.3 and 2.4) and non-EAAs (8.5 and 2.1% of the mean) were rather smaller than those of saturated fatty acids (30.3 and 26.1) and unsaturated fatty acids (UFAs, 12.0 and 12.5% of the mean) in f/2-Si and urea-based compound fertilizer (UCF) culture media, respectively. Mean compositions of eicosapentaenoic acid (EPA, 17.9%) and docosahexaenoic acid (DHA, 12.7%) of total fatty acids of the 2 TA strains were higher than those that of a Chroomonas strain. EPA and DHA compositions exhibited similar level of IVs between the 2 TA strains in f/2-Si (14.6 and 11.0) and UCF media (12.6 and 13.5% of the mean). Thus, the nutritional quality in terms of amino acids, UFAs, EPA, and DHA in a TPG clade species, T. amphioxeia was comparable to those of RHO clade species with notable IVs. Practically, biotechnological targets for TPG clade cryptomonad strains might be subspecies or clone level.

• 한국재료학회지
• /
• 제16권9호
• /
• pp.584-591
• /
• 2006

To enhance the machinability of the austenite stainless alloys, Mn and S were added to form MnS in the austenite matrix. Recently, Ca is also added to increase machinability. The alloying elements, such as C, Mn, S, Ca, and Al, are known to affect machinability, but those roles are not well understood. In this study, the ingots, controlled of alloying elements, C, Mn, S, Ca, Al, were prepared in the 304 stainless steel. The relationship between microstructure and machinability was compared to understand the role of alloying elements. It was proved that Mn and S enhanced machinability but C reduced it by analyzing cutting force on machining in the lathe. The alloying elements, Ca and Al, made a complex oxide compound of Mn-S-Ca-Al-Si-O, which results in increasing tool life. The ferrite volume fraction was changed with alloying elements and the effect of the ferrite fraction on machining was also discussed.

• 대한치과보철학회지
• /
• 제45권2호
• /
• pp.169-181
• /
• 2007

Statement of problem: Titanium is well known as a proper metal for the dental restorations, because it has an excellent biocompatibility, resistance to corrosion, and mechanical property. However, adhesion between titanium and dental porcelains is related to the diffusion of oxygen to the reaction layers formed on cast-titanium surfaces during porcelain firing and those oxidized layers make the adhesion difficult to be formed. Many studies using mechanical, chemical and physical methods to enhance the titanium-ceramic adhesion have been actively performed. Purpose: This study meant to comparatively analyse the adhesion characteristics depending on different titanium surface coatings after coating the casts and wrought titanium surfaces with Au and TiN. Material and method: In this study, the titanium specimens (CP-Ti, Grade 2, Kobe still Co. Japan) were categorized into cast and wrought titanium. The wrought titanium was cast by using the MgO-based investment(Selevest CB, Selec). The cast and wrought titanium were treated with Au coating($ParaOne^{(R)}$., Gold Ion Sputter, Model PS-1200) and TiN coating(ATEC system, Korea) and the ultra low fusing dental porcelain was fused and fired onto the samples. Biaxial flection test was done on the fired samples and the porcelain was separated. The adhesion characteristics of porcelain and titanium after firing and the specimen surfaces before and after the porcelain fracture test were observed with SEM. The atomic percent of Si on all sample surfaces was comparatively analysed by EDS. In addition, the constituents of specimen surface layers after the porcelain fracture and the formed compound were evaluated by X-ray diffraction diagnosis. Result: The results of this study were obtained as follows : 1. The surface characteristics of cast and wrought titanium after surface treatment(Au, TiN, $Al_2O_3$ sandblasting) were similar and each cast and wrought titanium showed similar bonding characteristics. 2. Before and after the biaxial flection test, the highest atomic weight change of Si component was found in $Al_2O_3$ sandblasted wrought titanium(28.6at.% $\rightarrow$ 8.3at.%). On the other hand, the least change was seen in Au-Pd-In alloy(24.5at.% $\rightarrow$ 9.1at.%). 3. Much amount of Si components was uniformly distributed in Au and TiN coated titanium, but less amount of Si's was unevenly dispersed on Al2O3 sandblasting surfaces. 4. In X-ray diffraction diagnosis after porcelain debonding, we could see $Au_2Ti$ compound and TiN coating layers on Au and TiN coated surfaces and $TiO_2$, typical oxide of titanium, on all titanium surfaces. 5. Debonding of porcelain on cast and wrought titanium surface after the biaxial flection is considered as a result of adhesion deterioration between coating layers and titanium surfaces. We found that there are both adhesive failure and cohesive failure at the same time. Conclusion: These results showed that the titanium-ceramic adhesion could be improved by coating cast and wrought titanium surfaces with Au and TiN when making porcelain fused to metal crowns. In order to use porcelain fused to titanium clinically, it is considered that coating technique to enhance the bonding strength between coating kKlayers and titanium surfaces should be developed first.

• 한국자원식물학회지
• /
• 제25권2호
• /
• pp.285-292
• /
• 2012

본 연구는 사과의 자가불화합성 현상에 효과적인 저해제와 활력제를 탐색하기 위해 여러 종류의 물질을 조사하였다. 후지 사과의 화주조직에서 분비되는 S RNase에 대한 저해효과를 조사하기 위해 $In$ $vitro$ 상에서 효소 저해제를 넣어 효소활성을 측정한 결과, Iron(II) Sulfate에서 현저하게 활성이 24.3% 감소되어 저해효과가 뛰어난 것으로 나타났다. $In$ $vitro$ 상에서 후지 사과의 화분관 신장 억제 효과를 분석한 결과, 후지 사과의 화분은 2% Sucrose 신장배지 보다 10% Sucrose 신장배지에서 약 90% 이상의 높은 발아율을 나타났다. 또한 저해제와 첨가제 처리에 의한 안동지역과 영주지역의 Field에서 후지 사과 착과율 조사 결과, 안동지역에서는 $A^+$+V6 2회 처리가 86.1%로 중심화착과율이 가장 높았으며, 영주지역에서는 $A^+$+V1 1회 처리가 91.9%로 중심화 착과율이 가장 높은 것으로 나타났다.

• 대한화장품학회지
• /
• 제44권3호
• /
• pp.211-218
• /
• 2018

즉각 리프팅 화장품은 피부 표면에 주름을 펴주는 다양한 필름 형성제를 함유하고 있다. 그러나 대부분의 필름 형성 고분자는 점착성이 있으며, 피부에 문지르면 밀려 나오는 현상이 있다. 본 연구에서는 신속한 박막 형성 효과가 있는 규산나트륨이 피부 표면에 미치는 영향 및 즉각적인 주름 감소 효과에 초점을 두었다. 물유리 또는 가용성 유리로도 알려진 규산나트륨은 산화나트륨과 실리카를 함유한 화합물이다. 규산나트륨은 물에 쉽게 용해되어 알칼리성 용액을 생성하는 흰색 분말이다. 규산나트륨은 중성 및 알칼리성 용액에서 안정적이며, 규산나트륨 용액은 공기 중에서 건조되어 경화되고 박막을 신속하게 형성한다. 해당 용액을 피부에 도포할 경우, 물 증발 및 이온 결합 재형성에 의해 얇은 막이 형성된다. 또한 피부 표면에 강한 실록산(Si-O) 결합을 형성한다. 이러한 고착성을 화장품에 적용하면 탁월한 피부 수축 효과를 나타낼 수 있다. 규산나트륨 용액은 적절한 농도로 배합될 경우, 피부에 필름을 형성하여 리프팅 효과를 제공할 수 있다. 그러나 높은 농도의 규산나트륨이 적용될 경우, 피부 자극을 일으킬 수 있다. 본 연구에서는 끈적임이 없고, 밀림 현상이 없는 피부 탄력 관리 제형을 개발하기 위해 규산나트륨의 농도 및 다른 고정제와의 바람직한 조합을 연구했다. 규산나트륨과 다양한 증점 시스템을 사용하여 즉각적인 리프팅 효과가 있는 젤 제형을 개발했다. 다양한 증점제 중에서 알루미늄 마그네슘 실리케이트는 단시간에 느껴지는 리프팅 효과를 위해 규산나트륨과 가장 우수한 상용성을 지닌다. 즉각적인 물리적 리프팅 젤은 피부 임상 시험을 통해 낮은 자극성을 지니고 있음을 확인했다.

• 전기화학회지
• /
• 제8권4호
• /
• pp.172-176
• /
• 2005

차세대 5V급 양극활물질로 각광받고 있는 $LiNi_{0.5}Mn_{1.5}O_4$는 기존의 $LiMn_2O_4$ spinel 물질의 $Mn^{3+}$을 $Ni^{2+}$으로 치환하여 5V 영역에서 $Ni^{2+}/Ni^{4+}$ 산화/환원 반응이 가능하게 한 물질이다. 기존의 $LiMn_2O_4$는 낮은 초기 용량과 충 방전에 따른 빠른 용량감소를 보이는 단점을 가지고 있어 이 문제를 극복하기 위해 Mn의 일부를 다른 금속으로 치환하여 $LiM_yMn_{2-y}O_4$ (M=Cr, Al, Ni, Fe, Co, Cu, Ca)을 만드는 방법이 활발히 연구되고 있다. 본 연구에서는 기계 화학적 합성법을 이용하여 합성한 $LiNi_{0.5}Mn_{1.5}O_4$의 전기화학적 특성에 대해 연구하였다. 이 물질은 기존의 $LiMn_2O_4$보다 에너지 밀도가 높으며 저가 및 친환경성 등으로 앞으로 HEV 등에서 그 활용성이 크게 기대된다. 볼밀을 이용하여 여러가지 조건(출발물질 조건, 볼밀조건, 열처리조건 등)에서 $LiNi_{0.5}Mn_{1.5}O_4$을 합성한 결과 기계화학적 방법으로는 $Ni^{2+}$가 $Mn^{3+}$를 완전히 치환하지 못하여 $4.0{\sim}4.1V$의 전압에서 $Mn^{3+}/Mn^{4+}$의 산화/환원과 관련된 peak가 발생하였다. Ni 원료 물질로써 수산화 물질을 사용하고 열처리 온도를 $800^{\circ}C$로 하였을 때 최상의 성능을 나타내었다.

• 한국방사선학회논문지
• /
• 제5권2호
• /
• pp.93-96
• /
• 2011

현재 광도전체 물질을 이용한 직접변환방식의 방사선 검출기 연구가 활발히 진행되고 있다. 이러한 광도전체 물질 중 상용화된 비정질 셀레늄(a-Se)에 비해 요오드화수은($HgI_2$) 광도전체 화합물은 고에너지에 대한 높은 흡수율과 민감도를 가지는 것으로 보고되고 있다. 또한 이러한 광도전체 필름은 발생된 신호의 검출효율은 상하부 전극크기에 의한 전기장의 세기 및 기하학적 분포에 많은 영향을 미치는 것으로 보고되고 있다. 이에 본 연구는 $HgI_2$ 광도전체 필름에서 상하부 전극의 크기에 따른 X선 검출특성을 조사하였다. 시편제작은 기존의 진공 증착법이 두꺼운 대면적 필름제조가 어렵다는 문제점을 해결하고자 페이스트 인쇄법을 이용하여 인듐전극이 코팅된 유리기관위에 제작하였으며, 시편의 두께를 $150{\mu}m$, 면적크기를 $3cm{\times}3cm$ 크기로 제조하였다. 상부전극은 마그네틱 스퍼터링법을 이용하여 $3cm{\times}3cm$, $2cm{\times}2cm$, $1cm{\times}1cm$의 크기로 ITO(indium-tin-oxide)를 진공 증착하였다. 특성평가를 위해 X선 선량에 대한 민감도와 누설전류, 신호대잡음비를 측정하여 필름의 전기적 검출 특성을 정량적으로 평가하였다. 그 결과 상부전극의 크기가 증가함에 따라 검출된 신호의 크기가 다소 증가하는 경향을 보였다. 하지만, 전극크기의 증가에 따른 누설전류 또한 증가함으로써 신호대잡음비는 오히려 감소하는 것을 확인할 수 있었다. 이러한 결과로부터 향후 광도전체를 적용한 X선 영상검출기 개발에 있어 상부전극의 최적크기와 구조설계가 고려되어야 할 것으로 사료된다.