• 제목/요약/키워드: CoAl

검색결과 2,556건 처리시간 0.034초

Characteristics of Hydraulic Lime using Low-grade Dolomitic Limestone

  • Moon, Ki-Yeon;Choi, Moon-Kwan;Cho, Jin-Sang;Cho, Kye-Hong;Ahn, Ji-Whan
    • 한국세라믹학회지
    • /
    • 제53권2호
    • /
    • pp.206-214
    • /
    • 2016
  • This study aims to produce dolomitic hydraulic lime (D-NHL) using domestic low grade dolomitic limestone and to determine the effect of adding blast furnace slag (BFS) and gypsum as part of an investigation of the hydration properties of D-NHL to increase the mechanical properties. The main mineral phases of D-NHL as a hydraulic lime binder were $Ca(OH)_2$, $Mg(OH)_2$, $C_2S$, $C_3S$, and MgO residues. $Ca(OH)_2$ transformed into $CaCO_3$ in D-NHL paste over the period of 28 days, but the carbonation of $Mg(OH)_2$ and the hydration of $C_2S$ did not occur until hydration, after 28 days. Through an investigation of the hydration properties of D-NHL pastes mixed with BFS and gypsum, Al-based compounds such as calcium aluminate hydrates ($C_4AH_{13}$) and ettringite were observed at early hydration time. The compressive strength was improved due to the increased quantities of these hydration products. These results show that good performance results from the application of dolomitic hydraulic lime and that a high value product can be made from domestic waste materials.

유기발광소자 특성에 미치는 PTFE 버퍼층의 영향 (Effect on the Characteristics of Organic Light-Emitting Devices due to the PTFE buffer layer)

  • 정준;오용철;정동희;정동관;김상걸;이수원;홍진웅
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
    • /
    • pp.1070-1073
    • /
    • 2003
  • We have studied the characteristics of organic light-emitting diodes(OLEDs) with the PTFE buffer layer. The OLEDs have been based on the molecular compounds, N,N'-diphenyl-N,N'-bis (3-methylphenyl)-1, 1'- biphenyl-4, 4'-diamine (TPD) as a hole transport, tris(8-hydroxyquinolinoline) aluminum (III) ($Alq_3$) as an electron transport and the Polytetrafluoroethylene (PTFE) as a buffer layer. The devices of structure were fabricated ITO/PTFE/TPD(40nm)/$Alq_3$(60nm)/Al( 150nm) to see the effects of the PTFE buffer layer in organic EL devices. The thickness of the PTFE layer varied from 0.5 to 10[nm]. We were measured Current-Voltage-Luminance Characteristics and Luminance efficiency due to the variation of PTFE thickness. the PTFE layer was reported that helped to enhance the hole tunneling injection and effectively impede induim diffusion from the ITO electrode. We have obtained an improvement of luminance efficiency when the PTFE thickness is 0.5[nm] is used. The improvement of efficiency of is expected due to a function of hole-blocking of PTFE in OLEDs.

  • PDF

탄소나노튜브의 저온성장을 위한 합성가스의 최적화 연구 (Optimization of Growth Gases for the Low-temperature Synthesis of Carbon Nanotubes)

  • 김영래;전홍준;이한성;곽정춘;황호수;공병윤;이내성
    • 한국전기전자재료학회논문지
    • /
    • 제22권4호
    • /
    • pp.342-349
    • /
    • 2009
  • This study investigated the growth characteristics of carbon nanotubes (CNTs) by changing a period of annealing time and a $C_{2}H_{2}/H_2$ flow ratio at temperature as low as $450^{\circ}C$ with inductively coupled plasma chemical vapor deposition. The 1-nm-thick Fe-Ni-Co alloy thin film served as a catalyst layer for the growth of CNTs, which was thermally evaporated on the 15-nm-thick Al underlayer deposited on the 50-nm-thick Ti diffusion barrier. The annealing at low temperature of $450^{\circ}C$ brought about almost no granulation of the catalyst layer, and the CNT growth was not affected by a period of annealing time. A study of changing the flow rate of $C_{2}H_{2}$ and $H_2$ showed that as the ratio of the $C_{2}H_{2}$ flow rate to the $H_2$ flow rate was lowered, the CNTs were grown to be longer With further decreasing the flow ratio, the length of CNTs reached the maximum and then became shorter. Under the optimized gas flow rates, we successfully synthesized CNTs with a uniform length over a 4-inch Si wafer at $450^{\circ}C$.

부영양 신갈지에서 천연물질 혼합제(PMC)의 수질개선능: 현장수온의 영향 (Effect of Temperature on Water Quality Improvement of Natural Plant-Mineral Composites (PMC) in a Eutrophic Lake, Lake Shingal, Korea)

  • 변정환;황수옥;문선기;황순진;김백호
    • 생태와환경
    • /
    • 제46권2호
    • /
    • pp.225-233
    • /
    • 2013
  • 부영양호 신갈지의 수질개선을 위하여 이미 개발된 천연물질 혼합제(PMC)의 수질개선능(WQI)에 수온변화가 어떠한 영향을 미치는지 현장실험을 실시하였다. 실험결과 식물플랑크톤, BOD, 총인 등은 $20^{\circ}C$ 이하에서는 70% WQI 이상을 보였으나 $25^{\circ}C$ 이상에서는 40% WQI 이하로 오히려 감소하였다. 한편 수온의 증가에 따라 남조류에 대해서는 WQI는 감소하였고, 규조류는 수온변화에 상관없이 90% 이상 높은 WQI를 나타냈으며, 박테리아와 총 질소는 수온과 상관없이 매우 낮은 WQI를 보였다. 이상의 결과들은 PMC의 수질개선능이 수온과 밀접한 관계를 가지며, $25^{\circ}C$ 이상의 고온기에 Microcystis aeruginosa가 우점하는 남조대발생보다 겨울철 저온기에 우점하는 규조류에 더 효과적일 것으로 판단되었다.

추부지역 흑색셰일 및 점판암 분포지역에서의 잠재적 독성원소들의 분산과 부화 (Dispersion and Enrichment of Potentially Toxic Elements in Chubu Area Covered with Black Shales and Slates in Korea)

  • 김종신;전효택
    • 자원환경지질
    • /
    • 제30권2호
    • /
    • pp.89-103
    • /
    • 1997
  • The purpose of this research is to investigate the enrichment and distribution patterns of naturally occurring potentially toxic elements in soils derived from black shales and slates. Soil samples were collected from the Chubu area covered with uranium-enriched black shales and slates of the Changri Formation of the Okchon Super Group, and analysed for multiple-elements using INAA, ICP-AES and AAS. Soil pH and loss-an-ignition were also measured. Trace element contents in black shale and slate of the Chubu area are relatively lower than those in black shales, and higher than those in black slates reported elsewhere (Chon, Jung, 1991; Chon et al., 1996). Soil pH values range from 3.5 to 6.5, and loss-an-ignition values are in the range from 3 to 10%. Potentially toxic elements including As, Ba, Cr, Cu, Mo and U are highly enriched in residual soils with maximum content of $540{\mu}g/g$, $35,000{\mu}g/g$, $280{\mu}g/g$, $300{\mu}g/g$, $240{\mu}g/g$ and $860{\mu}g/g$, respectively. Significant concentrations of those elements were found in soils taken from the Tojangkol, the Chubu tunnel and the Meokti areas. Soils derived from black shales and slates, calcareous and phyllitic rocks, and intrusions were discriminated in terms of As, Ba, Co, Cr, Cu, Mo, Sc and U contents. Enrichment index was calculated using the concentrations of As, Ba, Cr and Mo, and enrichment index map shows very similar trend with U distribution in soils.

  • PDF

인삼(人蔘)이 허혈성 중추신경 손상으로 발현 증가된 CD81 및 GFAP에 미치는 영향 (The Effect of the Radix Ginseng on Expression of CDSI and GFAP Following Hypoxic Injury on Central Nervous System)

  • 서중훈;송봉근;류영수;강형원;김태헌
    • 동의신경정신과학회지
    • /
    • 제20권1호
    • /
    • pp.177-197
    • /
    • 2009
  • Objectives : Gliosis disturbs recovery of damaged astrocytes following central nervous system(CNS) injury. Gliosis relates to up-regulation of CD81 and GFAP. In glial cells at injured CNS, the expression of CD81 and GFAP is increased. It is possible that when the gliosis formation is suppressed, regeneration of oxons can occur. According to the recent study, the treatment with anti CD81 antibodies enhanced functional recovery in rats with spinal injury. So, the author studies the effect of water extract of Radix Ginseng on regulation of CD81 and GFAP with CNS injury. Methods : In the cell study, hypoxic damage was induced by CoC12. And according to Longa et al, cerebral ischemia was made by middle cerebral artery occlusion in the rat. Cross sections of rat brain were examined under microscope. MTT analysis was performed to examine cell viability, cell based ELISA, Western Blot and PCR were used to detect the expression of CD81 and GFAP. Results : The following results were obtained. 1. We found that CD81 and GFAP were decreased in hypoxic injured cells following Radix Ginseng administration. 2. We injected the extract of Radix Ginseng to the middle cerebral artery occlusion in rats, and the immunohistochemistry analysis showed that CDS1 and GFAP were decreased. Conclusions : These results show that the extract of Radix Ginseng could suppress the gliosis formation and prevent cell death, by controlling the expression of CDS1 and GFAP. Therefore, Radix Ginseng could be a useful to regenerate CNS injury.

  • PDF

Assessment of bovine blood sample stability for complete blood count and blood gases and electrolytes analysis during storage

  • Espiritu, Hector M.;Faruk, Shohel Al;Lee, Gyeong-jae;Lopez, Bryan Irvine M.;Lee, Sang-suk;Cho, Yong-il
    • 한국동물위생학회지
    • /
    • 제42권4호
    • /
    • pp.265-274
    • /
    • 2019
  • Delayed arrival of blood samples from the field and a large number of samples delivered often causes delay in sample analysis leading to inaccurate measurements. Therefore, this study aimed to assess whether prolonged storage in refrigerator could influence the stability of cattle blood samples and to establish an optimal time limit for complete blood count (CBC) parameters and blood gas and electrolyte (BGE) parameters analyses. Samples collected from healthy cows were tested immediately for CBC and BGE using automated hematology, blood gas and electrolyte analyzers. Samples were kept in refrigerator at 4℃ and analyzed after 6 h, 12 h, 24 h, 48 h, 72 h, 120 h, and 192 h of storage. Mean differences between observations were assessed at 5% significance level using ANOVA and Duncan's multiple range test. Total CBC parameters and the platelet profile remained stable for 192 h, except for MCHC. Among leukocyte-related counts, NEU and EOS remained stable for 192 hours. WBC and LYM, and MONO values produced inconsistent measurements which recovered its initial measurement after 12 h and 24 h of storage, respectively, then remained stable until 120 h. Among the blood gas indices, PCO2, PO2, tCO2, and BE showed declining and significant changes over time, but pH, tHb, and SO2 remained stable for 192 h. Electrolyte status in the blood showed that ions are unstable and tend to change in as early as 6 h of storage. This study established that cattle blood specimens for CBC analysis can be stored for 120 h at 4℃, but specimens for BGE analyses must be tested within 6 to 24 h.

전자빔 증발법에 의한 박막형 고온초전도체의 $CeO_2$ 버퍼층 증착 연구 (Research for Deposition of $CeO_2$ Buffer Layer on Coated Conductor by Electron Beam Evaporation)

  • 이종범;박신근;김혜진;문승현;이희균;홍계원
    • Progress in Superconductivity
    • /
    • 제11권2호
    • /
    • pp.123-127
    • /
    • 2010
  • The properties of buffer layer for thermal and chemical stability in coated conductor is a very important issue. $CeO_2$ has desirable thermal and chemical stability as well as good lattice match. In this study, $CeO_2$ was deposited by electron beam deposition. The MgO(001) single crystal and LMO buffered IBAD substrate(LMO/IBAD-MgO/$Y_2O_3/Al_2O_3$/Hastelloy) were used as substrates, which have $\Delta\phi$ values of ${\sim}8.9^{\circ}$. The epitaxial $CeO_2$ films was deposited with high deposition rate of $12{\sim}16\;{\AA}/sec$. During deposition, the change of oxygen partial pressure(${\rho}O_2$) does not cause change in c-axis texture. In case of $CeO_2$ on MgO single crystal, the substrate temperature was optimized at $750^{\circ}C$ with superior $\Delta\phi$ and $\Delta\omega$ value. Otherwise, In case of LMO buffered IBAD substrate, It was optimized at $650^{\circ}C$ with increasing its deposition thickness of $CeO_2$, which was finally obtained with best $\Delta\phi$ value of $5.5^{\circ}$, $\Delta\omega$ value of $2^{\circ}$ and Ra value of 2.2 nm.

스텐실 프린트법으로 인쇄한 Sn-1.8Bi-0.7Cu-0.6In 솔더의 고온 시효 특성 (Aging Characteristics of Sn-1.8Bi-0.7Cu-0.6In Solder)

  • 이재식;조선연;이영우;김규석;전주선;정재필
    • 마이크로전자및패키징학회지
    • /
    • 제12권4호통권37호
    • /
    • pp.301-306
    • /
    • 2005
  • 새로 개발된 Sn-1.8Bi-0.7Cu-0.6In 솔더의 리플로우 후 고온시효 특성을 전당강도 및 미세구조 분석을 통하여 평가하였다. 범프 형성을 위하여 스텐실 프린트법을 사용하였다. Sn-1.8Bi-0.7Cu-0.6In 솔더의 전단강도가 초기 및 고온시효 후에도 가장 높았고, 생성된 계면 금속간화합물은 리플로우 초기뿐만 아니라 시효 후 동일 하게 $(Cu,\;Ni)_6Sn_5$가 형성되었다. 또한, 500시간 시효 이전에 솔더의 분리 현상이 관찰되었다.

  • PDF

파랑 중 오일붐 성능 예측을 위한 2차원 입자법 시뮬레이션 (2-Dimensional Moving Particle Simulation for Prediction of Oil Boom Performance in Waves)

  • 남정우;박지인;황성철;박종천;정세민
    • 한국해양공학회지
    • /
    • 제27권4호
    • /
    • pp.90-97
    • /
    • 2013
  • Oil booms are one of the most widely used types of equipment for the protection of coastal areas against oil spills. In some situations, however, there are several types of oil leaks from the oil boom. Important factors regarding these phenomena include the surrounding ocean environment, such as waves, the density and viscosity of oil, the length of the oil boom skirt, etc. To estimate the performance of the oil boom, it is necessary to predict the behavior of the spilled oil and oil boom. In the present study, the prediction of oil boom performance in waves was carried out using the Pusan-National-University-modified Moving Particle Semi-implicit (PNU-MPS) method, which is an improved version of the original MPS proposed by Koshizuka and Oka (1996). The governing equations, which consist of continuity and Navier-Stokes equations, are solved by Lagrangian moving particles, and all terms expressed by differential operators in the governing equations are replaced by the particle interaction models based on a kernel function. The simulation results were validated through a comparison with the results of Violeau et al. (2007)..