• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.05a
• /
• pp.60-63
• /
• 2005

After 20th century, Data tend to important in a sphere of architecture. In this study such tendency was christened a Data architecture. And The purpose of the study is to define data architecture and to find out of data architecture's merits from a communicational point of view. Above-mentioned Communication means that exchange all kinds of something between each other.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.335-338
• /
• 2004

In this study has developed analysis system for automatic inspection of FPD(Flat Panel Display) characteristic, such as brightness, view angle, color ratio in the manufacturing process. Developed system consists of inspection-sensor part, acquiring a data by 3-CCD Color CCD camera and Inspection-stage part, driving a FPD holder to rotation and tilt direction. In experiment results, we could have ensured easily brightness distribution, available view angle, color reproduce and could expect to improve the quality, productivity, and yield.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.5
• /
• pp.574-582
• /
• 1999

Computer Supported Cooperative Work(CSCW) systems for cooperaton in distributed computing environment are used in many fields such as on-line approval, co-authoring, co-decision making, and so on. There have been many researches on co-drawing tools of the CSCW system, because they can be used in communication, co-design, and education. However, the existing tools are not flexible in system architecture and concurrency control. In this paper, we present "autonomous object," which includes concurrency control policy and information about its view. And we developed a new CSCW system with flexible system architecture.

• Journal of Power System Engineering
• /
• v.17 no.4
• /
• pp.58-63
• /
• 2013

This paper presents the new cascade liquefaction cycles using $CO_2-C_2H_6-N_2$ and $CO_2-N_2O-N_2$. The performance of the cascade liquefaction cycles with respect to temperature differences in the LNG heat exchangers is analyzed using HYSYS software and then compared the performance of these cycles with phillips optimized cascade liquefaction cycle. The coefficient of performance of the new liquefaction cycles considered in this study decreases with the temperature differences in the LNG heat exchangers, but the compressor work, expander work and heat capacity in the LNG heat exchanger increases, respectively. From the comparison of performance of three cycles, the cascade liquefaction cycles using $CO_2-C_2H_6-N_2$ showed the highest COP. And the cycles using $CO_2-C_2H_6-N_2$ and $CO_2-N_2O-N_2$ presented the second and third highest COP, respectively. In the view of performance, the optimized cascade liquefaction cycle using $C_3H_8-C_2H_4-C_1H_4$ yields much better COP. But, in the environment view, it is found that the cascade liquefaction cycle using $CO_2-C_2H_6-N_2$ shows favorable characteristics.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.1
• /
• pp.75-81
• /
• 2023

In this study, we design an optimized Graphics Processing Unit (GPU)-based GNSS signal processing technique with the goal of designing and implementing a GNSS Software Defined Receiver (SDR) that can operate in real time all-in-view mode under multi-constellation and multi-frequency signal environment. In the proposed structure the correlators of the existing GNSS SDR are processed by the GPU. We designed a memory structure and processing method that can minimize memory access bottlenecks and optimize the GPU memory resource distribution. The designed GNSS SDR can select and operate only the desired GNSS or desired satellite signals by user input. Also, parameters such as the number of quantization bits, sampling rate, and number of signal tracking arms can be selected. The computing capability of the designed GPU-based GNSS SDR was evaluated and it was confirmed that up to 2400 channels can be processed in real time. As a result, the GPU-based GNSS SDR has sufficient performance to operate in real-time all-in-view mode. In future studies, it will be used for more diverse GNSS signal processing and will be applied to multipath effect analysis using more tracking arms.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.431-434
• /
• 2005

LabVIEW를 사용하여 광섬유에서의 극초단 펄스 전파의 특성에 관한 연구를 수행하였다. 수치해석을 위해 1550nm의 극초단 광원을 Silica재질의 광섬유에 도파시키고 Split Step Fourier 방법을 이용하여 전파특성을 계산하였다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1565-1573
• /
• 2007

This research was aimed to investigate the effect of $K_2CO_3$ instead of NaOH on retting of the kenaf bast. We examined the relationship between separation of fiber bundle and tensile strength besides observing the color, handle and cross sectional view for the kenaf fiber retted with various concentration(100, 150, 200, 250, 500, 1000mmol) of $K_2CO_3$ and double retted with 0.5% pectinase after $K_2CO_3$ retting. The one retted on low $K_2CO_3$ concentration, $150{\sim}200mmol$, showed the best result on color, handle and luster. The separation of fiber bundle started even at the low $K_2CO_3$ concentration, 100mmol, and as the $K_2CO_3$ concentration was higher, the size of the fiber bundle was smaller. In the case of 1000mmol, the fiber bundle became irregular, but they were breaking up into certain way. Regardless of $K_2CO_3$ concentration, the thinner the diameters of the kenaf fiber bundle, the stronger tensile strength have appeared. This result corresponds with the result of cross sectional view. Retting on $150{\sim}200mmol\;K_2CO_3$ concentration was most effective on fiber bundle#s separation and tensile strength. The one with double retted with 0.5% pectinase after $K_2CO_3$ retting showed very small size of fiber bundle and low tensile strength compare to the one just retted on $K_2CO_3$. This decrease of tensile strength seem to be related to damage of the fiber resulted by excessive fibrillation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.163-163
• /
• 2009

Viewing angle controllable liquid crystal display (LCD) associated with fringe-field switching (FFS) mode with high image quality is proposed. In the device, one pixel is composed of main and sub pixels, in which adjacent sub pixel is patterned with pixel electrodes direction orthogonal to the adjacent one. In this way, light leakage can be generated in the all viewing angle directions except the normal direction, realizing view angle controllable LCD in both horizontal and vertical directions.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2002.05a
• /
• pp.21-32
• /
• 2002

In accordance with the development plans of Ulsan harbor, Ulsan new harbor will be contructed considering supporting Ulsan harbor as a safe berthing and departure at single buoy mooring(SBM). In this study, we used a full-mission ship handling simulator adopting 300,000 DWT VLCC manoeuvered at the planned Ulsan SBM. Five masters who have had a long experience of ship maneuvering were called to carry out the simulations, of which each scenario were tried one, completed total of 68 times. The marine traffic safety was assessed in terms of 1) the closest point of approach(CPA) to other SBM and breakwater in the vicinity and the probability of crossing the restricted area of the closest SBM and fairway limit, 2) subjective evaluation such as the mental burden and the maneuvering difficulty of shiphanders, and 3) the opinions of shiphandlers. From the result of this simulation, we have a conclusion as follows; First, because crude oil berthing angle is so small by current S-OiL Co. crude oil buoy by SK Co. No 3 crude oil buoy different view SK Co. No 3 crude oil buoy and interference of current KNOC crude oil buoy, Berthing is impossible, and Emergency departing is very dangerous too operation impossible. Second it is desirable that SK Co. No 2 and No 3 Single buoy Mooring that do different view controls position so that to be not put in straight line each other. Third, SK Co. No 1 and 2 single buoy mooring that do different view to Onsanhang berthing and departing is seized by single buoy mooring by external force ship that set sail does faith control need.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.111-112
• /
• 2008

In this study, an image processing algorithm with Lab VIEW IMAQ Module is presented and discussed for the development of a microscopic gap measuring system using CCD sensor. LabVIEW IMAQ development application that is developed by National Instrument Co. Inc. has a graphical interface and many image processing functions, so that it provides an easier environment for the development of a measurement algorithm using the image data. Actual microscopic gap measuring experiment was executed using the algorithm developed in this study and it showed a promising result. Also, we could obtain the convenience of Lab VIEW IMAQ in developing the algorithm.