• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.207-215
• /
• 2004

There are various characteristics called for in work roll and intermediate rolls for cold rolling mills. Among these characteristics, the two main requirements are to ensure the quality of the rolled products and to reduce roll cost. To achieve these needs, resistance to wear, to thermal shock and to contact fatigue are especially important. This paper describes that new material(named DSR1) for intermediate rolls which greatly increases rolling campaign and improves resistance to wear has been developed. DSR1 was successfully manufactured and has been used in the cold rolling mill. It showed that Trial product was homogenous in hardness distribution and sufficient usable diameter. Also in service test, trial product is much more excellent rolling performance than conventional $5\%Cr$.

• 한국태양에너지학회 논문집
• /
• 제31권5호
• /
• pp.85-90
• /
• 2011

The effects of $CO_2$ ppm in atmosphere on the values of the total emissivity are studied. The predictions by several methods are compared. The predicted value differences between modified Kondratyev model and Hottel model are the smallest with in the range of values tested. The $CO_2$ ppm is varied from 300 ppm to 600 ppm. By Wide Band model, the total emissivity increases with increasing density-path length product rather linearly up to 0.1 g/$cm^2$. For given $CO_2$ ppm, the total emissivity increases as the air thickness increases. The same is true for both temperature and pressure increase. The temperature range tested is 220 to 300 K. Around 260K, the total emissivity is less sensitive with increasing temperature than with decreasing temperature. The pressure is varied from 0.94 to 1.06 atm. The percentage change of total emissivity with pressure change from 1atm is at most the percentage change of the pressure.

• 멤브레인
• /
• 제23권5호
• /
• pp.384-391
• /
• 2013

DME 제조공정에서 발생하는 혼합가스 중, $CO_2$를 제거하기 위하여 폴리술폰 고분자를 이용하여 지지체 중공사막을 제조하고, Hyflon AD를 코팅하여 복합막을 제조하였다. 제조된 중공사막을 이용하여 Flaring 모사가스에 대한 모듈의 성능을 측정하였다. 분리막 1단 평가 결과 1.2 MPa에서 Stage cut 0.24 이상의 $CO_2$농도는 3% 이하이며, 동일조건에서 $CO_2$ 제거율 및 $CH_4$ 회수율은 각각 약 80%이다. 분리막 2단 평가결과 Product 가스의 $CO_2$ 농도를 5%로 고정하였을 때, stage cut 0.074에서 recycle 되는 $CO_2$ 농도는 공급가스와 같은 농도를 가지며, 이때 $CH_4$의 회수율은 약 99%이다.

• Journal of Nutrition and Health
• /
• 제52권6호
• /
• pp.515-528
• /
• 2019

본 연구는 괭생이 모자반 추출물의 추출방법에 따른 면역증강활성에 관하여 비교 관찰하였고, 추출물간의 혼합비율을 다르게 혼합하여 제조한 괭생이 모자반 추출물의 최적 면역활성을 갖는 혼합비를 평가하였다. 비장세포에 괭생이 모자반 열수 (HWE), 주정 (EE), 초임계 (SFE) 추출물을 각각 처리하였을 때 HWE 및 SFE 처리구에서 비장세포 증식능 및 사이토카인 (IL-2, IFN-γ) 분비능이 높게 나타나는 것으로 관찰되었고, 각각의 추출물을 50, 100 mg/kg BW의 농도로 2주간 마우스에 투여하고 비장을 적출하여 비장세포 활성능에 관하여 관찰한 결과, HWE 및 SFE 투여구에서 비장세포 증식능 및 사이토카인 분비능이 높게 나타나는 것으로 관찰되었다. 동물실험에서 높은 활성을 보인 HWE와 SFE의 추출물의 혼합 최적비를 평가하기 위하여 HWE에 SFE를 5, 10, 15 및 20%로 혼합하여 대식세포에 처리하여 NO 및 사이토카인 분비능에 관하여 관찰한 결과, SFE를 5%, 10% 혼합한 추출물 처리구에서 활성이 높게 나타나는 것으로 관찰되었으며 혼합추출물을 100 mg/kg BW으로 14일간 투여한 마우스의 비장세포 활성에 관하여 관찰한 결과, SFE를 5%의 비율로 혼합한 추출물 처리구 비장세포 활성이 높게 나타나는 것으로 관찰되어 HWE와 SFE의 최적 혼합 비율을 HWE에 SFE를 5% 첨가하는 것으로 결정하였다. 결정된 최적혼합비로 100 mg/kg BW의 농도로 14일간 투여한 마우스의 비장세포에서 NK 세포를 분리하여 NK 세포의 활성능을 평가한 결과, 대조구 대비 높게 증가하는 것으로 나타났다. 따라서 괭생이 모자반 추출물을 최적비율로 혼합하여 제조한 혼합추출물은 비장세포, 대식세포 및 NK 세포에 대한 높은 활성능을 나타내어 면역증진에 기여하는 것으로 판단된다.

• 대한조선학회논문집
• /
• 제46권3호
• /
• pp.351-361
• /
• 2009

Many manufacturers define the system of a new product flexibility, and take advantage of previous-product information using the product configuration concept. Product configuration is an approach that defines the system of a new product centered on the product structure by referring to the previous-product information. In this paper, it is established how to apply the concept of a product configuration utilizing previous-ships information in construction cost estimation process systematically and effectively. For this, we define the advanced-construction cost estimation process based on a naval ship product model, and design construction cost estimating model. It is validated that this process and model have the applicability through the case study of the construction cost estimating of the mine-warfare ship.

• Journal of Ship and Ocean Technology
• /
• 제5권2호
• /
• pp.1-13
• /
• 2001

Data in one Product Model for shipbuilding is inevitably referenced and manipulated during each phase of design or production activities, and data or manipulation status naturally varies from the original with the advance of each activities. For Object-Oriented approach, it is hard to identify classes dealing with those variations, and even if once a product model is developed, it might be getting much harder to modify it to cope with a new additional phase of activities. This paper proposes an Instance-Oriented Modeling Method, temporarily named “Concept-Relationship Modeling Approach”, which handles Data structure and Behavior independently of each other in order to resolve the difficulties above.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.728-734
• /
• 1996

To obtain the relation in the electrochemical reduction of $CO_2$ in aqueous $KHCO_3$ colution between an activity for the product and the nature of Cu electrode, the electrode surface was characterized by using two methods: X-ray photoelectron spectroscopy (XPS) and photoelectron emission (PE) measurement. Electrolyses were performed with Cu electrodes pretreated in several ways. The distribution of the products changed drastically with electrolysis time and the pretreatment method. The features in XPS spectra were closely connected with the product distribution. The oxide film at the electrode surface was gradually reduced to bare Cu metal with electrolysis time, resulting in a variation of the product distribution. PE was measured by verying the wavelength of incident light at several temperatures. The dependence of PE on the measurement temperature changed greatly before and after electrolysis.

• Journal of Pharmaceutical Investigation
• /
• 제40권5호
• /
• pp.297-304
• /
• 2010

The present work focuses on preparation of olanzapine, orally dispersing tablets by direct compression method. Effect of super disintegrant crospovidone, disintegration time, drug content on in vitro release has been studied. A factorial design was employed in formulating a prompt dispersible tablet. The selected independent variables crospovidone and fmelt showed significant effect on dependent variables i.e. disintegration time and percent drug dissolved. Disintegration time and percent drug dissolved decreased with increase in the level of crospovidone. The similarity factor $f_2$ was found to be 97.48 for the developed formulation indicating the release was similar to that of the marketed formulation. Pharmacokinetics of olanzapine after single-dose oral administration of orally disintegrating tablet in normal volunteers were evaluated and the results showed that PK parameters (Cmax, Tmax, AUC) of the designed ODT matrix were similar to those of commercial product, Zyprexa Zydis$^{(R)}$ as a reference.

• 대한환경공학회지
• /
• 제38권11호
• /
• pp.611-617
• /
• 2016

사용 후 제품을 회수하여 완전 해체하고 부품들을 세척, 수리, 또는 새로운 부품으로 교체하여 재조립함으로써 신품과 동일한 성능 수준으로 재 제품화 하는 재제조는 천연자원과 에너지 사용의 저감 등 자원순환 측면에서의 환경적 개선효과가 뛰어나 자원 측면에서 주목받고 있다. 재제조는 뛰어난 환경개선 효과 및 자원보존으로 인해 우리나라에서 많은 연구가 수행되어왔으며, 현재 자동차 부품, 프린터 토너 및 카트리지를 중심으로 재제조가 이루어지고 있다. 하지만 코어의 상태가 양호한 상태로 반환되어 재제조 공정을 거쳐 새 제품과 동일한 상태의 재제조품 생산이 가능한 렌탈 제품은 아직까지 활성화 되어있지 않다. 따라서, 본 연구에서는 LCA 기법을 이용해 렌탈 제품 중 하나인 공기청정기 신품과 재제조 제품의 환경성평가를 수행하였으며, 이를 통해 렌탈 제품 신품 대비 재제조품의 환경적 개선 효과를 정량적으로 분석하였다. 분석결과 공기청정기 1대 재제조 시 환경영향은 신품대비 약 20.7% 감소하는 것으로 나타났다. 환경과 관련된 영향범주 중 오존층 파괴(ODP)가 94% 감소하여 가장 큰 효과가 있는 것으로 나타났으며, 공기청정기의 수명주기에서 원료 추출 단계에서는 자원고갈(ADP) 및 지구온난화(GWP)에 대한 환경개선 효과가 가장 큰 것으로 나타났다.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.454-461
• /
• 2010

The new SOLAS regulation permits the alternative design approach for the approval of designs which deviate from those where prescriptive rules apply. The new approach is being promoted by recent advances of noble designs such as those employing large public spaces in passenger ships. From the respect of fire safety, it is needed to show that the level of safety of new design is equivalent to what can be achieved from the prescriptive rules where the fire simulation is regarded to be the essential tool. This paper provides an overview of the process of performance-based design of the smoke extraction system in a cafeteria of a ROPAX. FDS, a CFD fire simulation software is used to show that the field-model software can improve the fire safety over what are expected from prescriptive rule sets or zone-model application.