• Journal of Microbiology and Biotechnology
• /
• v.18 no.6
• /
• pp.1136-1140
• /
• 2008

The Rhodopseudomonas palustris KUGB306 hemA gene codes for 5-aminolevulinic acid (ALA) synthase. This enzyme catalyzes the condensation of glycine and succinyl-CoA to yield ALA in the presence of the cofactor pyridoxal 5'-phosphate. The R. palustris KUGB306 hemA gene in the pGEX-KG vector system was transformed into Escherichia coli BL21. The effects of physiological factors on the extracellular production of ALA by the recombinant E. coli were studied. Terrific Broth (TB) medium resulted in significantly higher cell growth and ALA production than did Luria-Bertani (LB) medium. ALA production was significantly enhanced by the addition of succinate together with glycine in the medium. Maximal ALA production (2.5 g/l) was observed upon the addition of D-glucose as an ALA dehydratase inhibitor in the late-log culture phase. Based on the results obtained from the shake-flask cultures, fermentation was carried out using the recombinant E. coli in TB medium, with the initial addition of 90 mM glycine and 120 mM succinate, and the addition of 45 mM D-glucose in the late-log phase. The extracellular production of ALA was also influenced by the pH of the culture broth. We maintained a pH of 6.5 in the fermenter throughout the culture process, achieving the maximal levels of extracellular ALA production (5.15 g/l, 39.3 mM).

• Journal of Pharmaceutical Investigation
• /
• v.37 no.3
• /
• pp.193-196
• /
• 2007

This study aimed to evaluate and develop $Eudragit^{(R)}$-coated pellets based on the dissolution using the paddle method. As coating materials, two types of $Eudragit^{(R)}$ were applied to obtain either sustained release form or fast released form. The dissolution test was carried out in phosphate buffer solution (pH 6.5) at $37^{\circ}C$, 100 rpm. In order to develop a sustained release preparation containing felodipine, a comparative dissolution study was done using commercial product as a control. The dissolution at 30 min of felodipine from $Eudragit^{(R)}$ RS or RL-coated pellets were 0.96% and 99.65, respectively. The weight ratio of $Eudragit^{(R)}$ RL pellets to RS pellets altered the dissolution rate, but did not optimize the dissolution rate. However, the sustained dissolution of felodipine from pellets was optimized by varying the coating ratios of $Eudragit^{(R)}$ RS. It is suggested that the coating ratio of pellets is the main factor which controls dissolution rate. Taken together, $Eudragit^{(R)}$ RS 30D-coated pellets showed the most comparable dissolution rate pattern to commercial product, $Splendil^{(R)}$. This sustained release pellets for oral delivery system of felodipine was simply manufactured, and drug release behavior was highly reproducible.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.5
• /
• pp.638-642
• /
• 2000

A ${\beta}-glycosidase$ enzyme with $\beta$-D-fucosidase, ${\beta}-D-galactosidase$, and $\beta$-D-glucosidase activities has been purified from Thermus caldophilus GK24. The enzyme was monomeric with a molecular mass of 49 kDa, as evidenced by SDS-PAGE. The $K_m$ values for p-nitrophenyl ${\beta}-D-fucopyranoside$ (p-NPFuc), p-nitrophenyl ${\beta}-D-galactopyranoside$ (p-NPGal), and p-nitrophenyl ${\beta}-D-glucopyranoside$ (p-NPGlu) were 0.23 mM, 6.25 mM, and 0.28 mM, respectively. The enzyme showed optimal pH ranging between 5.5-6.5 and maximum temperature in the range of $85-90^{\circ}C$ for all the above mentioned activities. The half-life of the enzyme in sodium phosphate buffer (pH 6.0) at $80^{\circ}C$ was approximately 7 h. The p-NPGal hydrolyzing activity of Tca ${\beta}-glycosidase$ was strongly activated by L-histidine, while the p-NPFuc and p-NPGlu hydrolyzing activities of Tca ${\beta}-glycosidase$ were not affected at all by the amino acid. These results suggest differences in the conformation or in the reactive residues at the active site of Tca ${\beta}-glycosidase$.

• Ocean and Polar Research
• /
• v.26 no.2
• /
• pp.231-243
• /
• 2004

Sequential extraction was carried out on twenty two subsamples of three ferromanganese crusts from three seamounts (Lemkein, Lomilik, and Litakpooki) near the Marshall Islands in the western Pacific. The extraction was designed to fractionate Fe-Mn crust forming elements into low defined groups: (1) exchangeable and carbornate, (2) Mn-oxide, (3) Fe-oxyhyd.oxide, and (4) residual fraction. X-ray diffraction result shows that target material were well removed by each extraction step except for CFA in phosphatized crusts generation. According to chemical analysis of each leachate, most of elements in the Fe-Mn crusts are bound with two major phases. Mn, Ba, Co, Ni, Zn, (Fe, Sr, Cu, and V) are strongly bounded with Mn-oxide $({\delta}-MnO_2)$ phase, whereas Fe, Ti, Zr, Mo, Pb, Al, Cu,(V, P, and Zn) show chemical affinity with Fe-oxyhydroxide phase. This result indicates that significant amount of Al, Ti, and Zr can not be explained by detrital origin. Ca, Mg, K, and Sr mainly occur as exchangeable elements and/or carbonate phase. Outermost layer 1 and inner layer 2 which are both young crusts generations are similar in chemical speciations of elements. However, some of Fe-oxyhydroxide bounded elements (Pb, Y, Mo, Ba, Al, and V) in phosphatized innermost layer 3 are released during phosphatization and incorporated into phosphate (Pb, Y, Mo, and Ba) or Mn-oxide phase (Al and V). Our sequential extraction results reveal that chemical speciations of elements in the hydrogenetic crusts are more or less different from interelemental relationship calculated by statistical method based on bulk chemistry.

• Nutrition Research and Practice
• /
• v.9 no.4
• /
• pp.439-444
• /
• 2015

BACKGROUND/OBJECTIVES: This study was conducted to investigate the effects of fermented soybean (FS) extract on adipocyte differentiation and fat accumulation using cultured 3T3-L1 adipocytes. MATERIALS/METHODS: 3T3-L1 adipocytes were treated with FS and nonfermented soybean (NFS) extract during differentiation for 10 days in vitro. Oil red O staining was performed and glycerol-3-phosphate dehydrogenase (GPDH) activity was measured for analysis of fat accumulation. Expressions of adipogenic genes were measured. RESULTS: Soluble extract of soybean fermented with Aspergillus oryzae GB107 contained higher levels of low-molecular-weight protein than conventional soybean protein did. FS extract ($50{\mu}g/ml$) inhibited adipocyte differentiation and fat accumulation during differentiation of 3T3-L1 preadipocytes for 10 days in vitro. Significantly lower GPDH activity was observed in differentiated adipocytes treated with the FS extract than those treated with NFS extract. Treatment with FS extract resulted in decreased expression levels of leptin, adiponectin, and adipogenin genes, which are associated with adipogenesis. CONCLUSIONS: This report is the first to demonstrate that the water-soluble extract from FS inhibits fat accumulation and lipid storage in 3T3-L1 adipocytes. Thus, the soybean extract fermented with A. oryzae GB107 could be used to control lipid accumulation in adipocytes.

• Nutrition Research and Practice
• /
• v.12 no.4
• /
• pp.298-306
• /
• 2018

BACKGROUND/OBJECTIVES: Obesity is a global health problem of significant importance which increases mortality. In place of anti-obesity drugs, natural products are being developed as alternative therapeutic materials. In this study, we investigated the effect of Brassica juncea L. leaf extract (BLE) on fat deposition and lipid profiles in high-fat, high-cholesterol diet (HFC)-induced obese rats. MATERIALS/METHODS: Male Sprague-Dawley rats were divided into four groups (n = 8 per group) according to diet: normal diet group (ND), high-fat/high-cholesterol diet group (HFC), HFC with 3% BLE diet group (HFC-A1), and HFC with 5% BLE diet group (HFC-A2). Each group was fed for 6 weeks. Rat body and adipose tissue weights, serum biochemical parameters, and tissue lipid contents were determined. The expression levels of mRNA and proteins involved in lipid and cholesterol metabolism were determined by reverse transcription polymerase chain reaction and western blot analysis, respectively. RESULTS: The HFC-A2 group showed significantly lower body weight gain and food efficiency ratio than the HFC group. BLE supplementation caused mesenteric, epididymal, and total adipose tissue weights to decrease. The serum levels of triglyceride, total cholesterol, and low-density lipoprotein cholesterol were significantly reduced, and high-density lipoprotein cholesterol was significantly increased in rats fed BLE. These results were related to lower glucose-6-phosphate dehydrogenase, acetyl-coA carboxylase, and fatty acid synthase mRNA expression, and to higher expression of the cholesterol $7{\alpha}$-hydroxylase and low density lipoprotein-receptor, as well as increased protein levels of peroxisome proliferator-activated receptor ${\alpha}$. Histological analysis of the liver revealed decreased lipid droplets in HFC rats treated with BLE. CONCLUSIONS: Supplementation of HFC with 3% or 5% BLE inhibited body fat accumulation, improved lipid profiles, and modulated lipogenesis- and cholesterol metabolism-related gene and protein expression.

• Membrane Journal
• /
• v.15 no.2
• /
• pp.121-131
• /
• 2005

Separation and purification of lysozyme from chicken egg white was studied using ultrafiltration. We have obtained experimental data through the cellulose membranes with the molecular weight cut off (MWCO) of 10 kDa, 30 kDa and 100 kDa in a stirred ultrafiltration device. Certain amounts of egg white were dissolved into 20 mM phosphate buffers of pH 6, 7 and 8 to make protein solutions of $1\%,\;2\%,\;3\%\;and\;10\%$ concentration. Permeation flux increased with increasing MWCO of the membrane. Permeation flux increased with increasing transmembrane pressure (TMP) and decreasing the protein concentration. As the MWCO of membrane decreased, the selectivity increased. The selectivity increased with increasing TMP and protein concentration of the solution.

• Korean Journal of Materials Research
• /
• v.15 no.2
• /
• pp.134-138
• /
• 2005

This study was performed to investigate the surface properties of electrochemically oxidized pure niobium by anodic oxide and hydrothermal treatment technique. Niobium specimens of $10mm\times10mm\times1.0mm$ in dimension were polished sequentially from $\#600,\;\#800,\;\#1000$ emery paper. The surface of pure niobium sperimens was anodized in an electrolytic solution that was dissolved calcium and phosphate in water. The electrolytic voltage was set in the range of 250 V and the current density was $10mA/cm^2$. The specimen was hydrothermal treated in high-pressure steam at $300^{\circ}C$ for 2 hours using an autoclave. And all specimens were immersed in the in the Hanks' solution nth pH 7.4 at $37^{\circ}C$ for 30 days. The surface of specimen was characterized by surface roughness, scanning electron microscope(SEM), energy dispersion X-ray analysis(EDX), X-ray photoemission spectroscopy(XPS) test. The value of surface roughness was the highest in the anodized sample and $0.41{\pm}0.04\;{\mu}m$. The results of the SEM observation show that oxide layers of the multi porosity in the anodized sample were piled up on another, and hydroxyapatite crystal was precipitate from the surface of the hydrothermal treated sample. In the XPS analysis, O, Nb, C peak and small amounts of N peak were found in the polished specimens while Ca and P peak in addition to O, Nb, C and peak were observed in the hydrothermal treated sample.

• Journal of the Korean Ceramic Society
• /
• v.47 no.2
• /
• pp.117-121
• /
• 2010

$SnO_2-(1-x)P_2O_5-xB_2O_3$ glass system were prepared by melt-quenching technique in the compositional series containing 50, 55 and 60 mol% of $SnO_2$. Local structure of the glasses was investigated by Raman and FT-IR measurements. A large glass-forming region was found at the phosphate side of the ternary system with homogeneous glasses containing up to 5~25 mol% of $B_2O_3$. According as content of $B_2O_3$ increases, theraml expansion coefficient of glass decreased but transition temperature and softening temperature increased. Because these phenomenon changed local structure of glass. According as content of $B_2O_3$ increases, quantity of bridging oxygen increased. Also, according as content of $SnO_2$ increases, confirmed that quantity of non-bridging oxygen increases.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.6
• /
• pp.553-561
• /
• 2012

Existing energy sources convert chemical energy into mechanical energy, while fuel cell directly generates electricity through an electrochemical reaction between hydrogen and oxygen. Therefore, it has a lot of strong points such as high efficiency, zero emission, and etc. In addition, with the development of hydrogen preservation technique, some companies have been researching and releasing portable fuel cell power packs for specific applications like military equipment, automobile, and so on. However, there are some drawbacks to the fuel cell, high cost and slow dynamic response. In order to compensate these weak points, auxiliary energy storages could be applied to the fuel cell system. In this paper, the optimum structure for a 150W portable fuel cell power pack with a battery pack is selected considering the specification of the system, and the design process of main parts is described in detail. Here, main objectives are compact size, simple control, high efficiency, and low cost. Then, an automatic mode change algorithm, which converts the operating mode depending on the states of fuel cell stack, battery pack, and load, is introduced. Finally, performance of the designed prototype using the automatic mode change control is verified through experiments.