• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.69-74
• /
• 2001

In this Paper are described the indirect induction heated boiler and induction heated hot air producer using the voltage-fed series resonant high-frequency inverter which can operate in the frequency range from 20kHz to 50kHz. A specially designed induction heater, which is composed of laminated stainless assembly with many tiny holes and interconnected spot welding points between stainless plates, is inserted into the ceramic type vessel with external working coil. This working coil is connected to the inverter and turbulence fluid through this induction heater to moving fluid generates in the vessel. The operating performances of this unique appliance in next generation and its effectiveness are evaluated and discussed from a practical point of view.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1639-1641
• /
• 1997

In this study, We developed the 154kV optical fiber incorporated power cable which is combined optical fibers with conventional 154kV power cable. Also, we developed optical unit that optical fiber is inserted in stainless tube. The optical unit was tested, and we got good results enough to safe optical fibers. Also we put the optical fiber incorporated power cable to the test of electrical characteristics and optical characteristics, we knew that the electrical characteristics were the same characteristics as conventional 154kV power cable and the transmission loss change was almost zero. The method of optical unit connection was examined.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.894-896
• /
• 2000

In this paper, we have designed the advanced DVT HLSM inserted a permanent magnet into the slot in order to improve the thrust force without increasing the normal force. And it was analyzed the characteristics of thrust force and normal force of the new HLSM by using Finite Element Method and Virtual Work Method. As a result of this paper it was confirmed that the thrust force characteristics of the new HLSM improved about 23% in comparision with DVT HLSM without increasing the normal force.

• Journal of Magnetics
• /
• v.3 no.3
• /
• pp.69-73
• /
• 1998

A drum type magnetic separator was designed and optimized by computer simulation. The separator consisted of rotating outer shell of drum, magnetic flux generator drum which was assembled with numbers of disk type magnet holders, and drum axis around which the magnet holders were fixed. NdFeB magnet blocks were inserted into the disks, and the disks were assembled layer by layer along the drum axis. Magnetic circuits of the separator were simulated on the basis of highest magnetic strength, least cost, and high yield of separation by using a Vector Field S/W employing the Opera-2D program. The separator proved a separation yield of 95% in removing fine iron-base particles, and installed at Hot Rolling Mill of Pohang Iron & Steel Co. In Korea.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.483-486
• /
• 2001

This Paper the state-of-the art indirect induction heated boiler and induction heated hot air producer using the voltage-fed series resonant high-frequency inverter whice can operate in the frequency range from 20kHz to 50kHz. A specially-designed induction heater composed of laminated stainless assembly with many tiny holes and interconnected spot welding points between stainless plates is inserted into the ceramic type vessel with external working coil connected to the inverter and tubelence fluid through this induction heater in moving fluid generates in the vessel. The operating performances of this unique appliance in next generation and its effectiveness are evaluated and discussed from a practical point of view.

• Proceedings of the KSAR Conference
• /
• 2004.06a
• /
• pp.249-249
• /
• 2004

This study was conducted to investigate optimal insemination timming as a scanning changes of follicular development by synchronization of ovulation(Ov-synch.) treatment for timed artificial insemination of deer. Sixty-nine elk does were inserted CIDR into virginia for 14 days from 16 to 29 September(breeding season). (omitted)

• Progress in Medical Physics
• /
• v.8 no.1
• /
• pp.37-45
• /
• 1997

The present work is determine to the dose distribution reduced by the insertion of a shielded into a vaginal cylinder around a $\^$60/CO source in brachytherapy, and to the source calibration. It was investigated by measuring the relative dose around a 2.5cm diameter shielded vaginal cylinder in a polystyrene phantom by use of a ionization chamber. Measurements were made with the cylinder unshielded and 0.55cm thick 90$^{\circ}C$ lead shields inserted. Also, the dose distribution compared measurement value with calculation value according to the device manufacturer and the multiple-divided dose tables. A reduction in dose was observed on the unshielded side of the cylinder which increased with distance from the source and it does 4.4％ within 1cm from the surface of the cylinder. On the shielded side of the cylinder, the dose at the surface is reduced to about 20.4％ of its value without the shield. The effective attenuation factor entered for the 90$^{\circ}C$ lead shielded cylinder was average 0.2 in a $\^$60/CO moving source. In comparision with the dose calculation mathods, the multiple-divided dose tables are difference less than ${\pm}$4.1％ with measured data in a $\^$60/Co source.

• Journal of the Korean Magnetics Society
• /
• v.6 no.6
• /
• pp.411-416
• /
• 1996

We have studied the effect of a spin-dependence interface electron scattering on the giant magnetoresistance by adding a Fe magnetic material to the Co/Cu interfaces. The $Fe(50\;{\AA})/[Co(17\;{\AA})/Fe(t\;{\AA})/Cu(24\;{\AA})]_{20}$ multilayers are deposited on the Corning glass 2948 and 7059 substrates in a dc magnetron sputtering system. The magnetoresistance ratio is 22 % in the only Co/Cu multilayer, while it is increased to 26 % with inserted ultra thin Fe interface layer and reduced with increasing thickness of the Fe interface layer. It was investigated to the dependence of the magnetoresistance behaviors on annealing temperature. The magnetic properties of the multilayers were measured by vibrating sample magnetometer. Also, the structures and the surface roughness of samples were characterized by X-ray diffraction and atomic force microscope, respectively. The magnetoresistance ratio was increased to annealing temperature $300^{\circ}C$, but reduced at the temperature higher than $300^{\circ}C$ due to the interfacial diffuse.

• Journal of the Korean Magnetics Society
• /
• v.13 no.5
• /
• pp.187-192
• /
• 2003

The magnetic and thermal properties of NiFe/[IrMn-Mn]/CoFe with Mn additions have been studied. As-deposited CoFe pinned layers with [IrMn-Mn]layer had dominantly larger exchange biasing field ( $H_{ex}$) and blocking temperature ( $T_{b}$) than those with pure I $r_{22}$M $n_{78}$ used. The $H_{ex}$ and $T_{b}$ improved with 76.8-78.1 vol% Mn, but those of the NiFe/IrMn/CoFe dropped considerably with more addition of 0.6 vol % Mn. The average x-ray diffraction peak ratios of fcc [(111)CoFe, NiFe]/(111)IrM $n_3$ textures for the Mn inserted total vol of 75.5, 77.5, and 79.3% were about 1.4, 0.8, and 0.6, respectively. For the sample without Mn inserted layer, the $H_{ex}$ between IrMn and CoFe layers was almost zero, but it increased to 100 Oe after annealing of 250 $^{\circ}C$. For as-grown two multilayers samples with ultra-thin Mn layers of 77.5 and 78.7 vol %, the $H_{ex}$s were 259 and 150 Oe, respectively. In case of IrMn with 77.5 vol% Mn, the $H_{ex}$ was increased up to 475 Oe at 350 $^{\circ}C$ but decreased to 200 Oe at 450 $^{\circ}C$, respectively. The magnetic properties and thermal stabilities of NiFe/[IrMn-Mn]/CoFe multilayer were enhanced with Mn additions. In applications where higher $H_{ex}$ and $T_{b}$ are required, proper contents of Mn can be used. be used. used.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.8
• /
• pp.3627-3630
• /
• 2012

The epithelial cell adhesion molecule (EpCAM) is a pan-epithelial differentiation antigen that is expressed on almost all carcinomas. However, a role in rat liver carcinogenesis has never been reported previously. Thus, its expression was investigated herein in rat liver tumors induced by diethylnitrosamine (DEN). Twenty male 5-week-old F344 rats were used in this experiment. Mini-osmotic pumps containing doses of 47.5 mg of DEN were inserted into the abdominal cavity of each animal to initiate liver carcinogenesis. All animals were sacrificed at 26 weeks after DEN treatment. At necropsy, hepatic masses were processed for histopathological examination, which revealed forty-four hepatocellular adenomas (HCAs) and twenty hepatocellular carcinomas (HCC). Tumors were immunohistochemically analyzed for EpCAM, proliferating cell nuclear antigen (PCNA) and co-localization of the two. EpCAM expression was mainly detected in hepatic tumor cells, showing a cytoplasmic staining pattern. However, expression was also slightly observed in normally-appearing surrounding hepatic cells. PCNA expression was highly detected in tumor cells, showing nuclear staining. Double staining of EpCAM and PCNA in tumors showed many cells with co-localization. Taken together, EpCAM and PCNA expression were increased in DEN-induced tumors and many tumor cells showed co-expression. It is suggested that EpCAM may increase during DEN-induced tumors, possibly associated with cell proliferation.