• 천문학회지
• /
• 제29권2호
• /
• pp.223-243
• /
• 1996

We have constructed a line-by-line model of the A-X system of CO in order to analyze the CO bands appearing in the UV spectra of comets. The model includes electronic, rotational, vibrational transitions, excitations by solar UV radiation, and effects of neutral and electron collisions. The major bands of the A-X system occur in the $1200 - 1800{\AA}$ range where the temporal variation of solar irradiation is significant. The solar spectrum in this spectral range shows many emission lines, which cause a significant Swings effect. We derived fluorescence efficiencies of the bands as functions of heliocentric velocity and cometocentric distance using a high resolution spectrum of the sun. We compared our model with a spectrum of comet P/Halley obtained with the IUE, and estimated that the UV Swings effects are less than 20 fluorescence efficiencies for the most bands of the A-X system. We discuss the temporal variation of solar UV irradiation and its effects on the fluorescence efficiencies. The study of the A-X system also requites knowledge of vibrational and rotational fluorescent processes in the infrared and radio regions because the majority of CO molecules in the coma is in the ground rotational states. The solar infrared spectrum near 5 microns, where the fundamental band of CO occurs, contains strong absorption lines of the fundamental band and hot bands of CO and its isotopes. We derived fluorescence efficiencies of the infrared band as functions of heliocentric velocity and cometrocentric distance. The solar absorption lines near 5 microns cause a 20 reduction of the g-factor of the fundamental band at heliocentric velocities close to 0 km/sec. We discuss the effects of neutral and electron collisions on the fluorescence efficiencies of the infrared and UV bands.

• 충청수학회지
• /
• 제8권1호
• /
• pp.1-10
• /
• 1995

For analyzing systems of multi-variate nonlinear equations, the linearized modelling techniques are elaborated. The technique applies Newton-Raphson iteration, partial differentiation and matrix operation providing solvable solutions to complicated problems. Practical application examples are given in; determining the zero point of functions, determining maximum (or minimum) point of functions, nonlinear regression analysis, and solving complex co-efficient polynomials. Merits and demerits of linearized modelling techniques are also discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.60-63
• /
• 1991

Nowadays inverters are widely used for energy-saving and factory automation. Accordingly the characteristics and functions of the inverter are well understood. To our surprise, the characteristics and functions of the inverter-driven induction motor are not well understood. In this technical review, the electrical and mechanical characteristics of the inverter-driven motor, the optimal combination of the inverter with motor, the special design of the inverter-driven motor, and the application of the inverter with the existing motor are given, based on ABB Drives' experiences and technical data.

• International Journal of Control, Automation, and Systems
• /
• 제6권3호
• /
• pp.394-400
• /
• 2008

A known nonlinear compensator design approach is adapted to allow design of nonlinear lead and/or lag compensators, and a number of MATLAB functions are developed that automate the compensator design procedure. With this design tool, control engineers would be able to rapidly design nonlinear lead and/or lag compensators. An example of a tutorial nature is presented.

• Journal of Mechanical Science and Technology
• /
• 제20권2호
• /
• pp.205-211
• /
• 2006

Among other critical conditions in rotor systems the large non-linear vibration excited by bearing non-linearity causes the rotor failure. For reducing this catastrophic failure and predictive detection of this phenomenon the analysis of orthotropic bearing non-linearity in rotor system using higher order frequency response functions (HFRFs) is conducted and is shown to be theoretically feasible as that of non-rotating structures. The complex HFRFs based on the Volterra series are newly developed for the process and investigated their features by using the simple forms of the FRFs associated with the forward and the backward modes.

• Bulletin of the Korean Chemical Society
• /
• 제16권5호
• /
• pp.432-436
• /
• 1995

The solubility of caffeine in compressed carbon dioxide has been measured to determine its fugacity coefficient between 330 and 410 K up to 500 bar. The result allows the calculation of the thermodynamic excess functions such as the molar excess enthalpy, the molar excess free energy, and the molar excess entropy. The pressure variations of the molar excess functions of caffeine in the caffeine-CO2 mixture were discussed and also compared them with those in the caffeine-NH3 mixture.

• Structural Engineering and Mechanics
• /
• 제50권3호
• /
• pp.257-273
• /
• 2014

This paper introduces a novel optimization technique based on gravitational search algorithm (GSA) for numerical optimization and multi-objective optimization of foundation. In the proposed method, a chaotic time varying system is applied into the position updating equation to increase the global exploration ability and accurate local exploitation of the original algorithm. The new algorithm called global-local GSA (GLGSA) is applied for optimization of some well-known mathematical benchmark functions as well as two design examples of spread foundation. In the foundation optimization, two objective functions include total cost and $CO_2$ emissions of the foundation subjected to geotechnical and structural requirements are considered. From environmental point of view, minimization of embedded $CO_2$ emissions that quantifies the total amount of carbon dioxide emissions resulting from the use of materials seems necessary to include in the design criteria. The experimental results demonstrate that, the proposed GLGSA remarkably improves the accuracy, stability and efficiency of the original algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2190-2192
• /
• 1997

Recently, the research of the distribution automatic system is increased. Distribution automatic system in local switchgear side usually consists of a switchgear controller and a feeder remote unit. A feeder remote unit (FRU) analyzes remote control order from the sudstation communication control unit(SCCU) located remote position using MODEM and delivers order to a switchgear controller. The each state of a switchgear is also delivered to a SCCU through a FRU. Switchgear controller operates switchgear directly and collects the each state of switchgear. In this system between a FRU and a switchgear controller, there are many functions which is included both of them. In this paper the combined switchgear controller which unified the conventional control functions of a FRU and a swichgear controller is proposed. The combined switchgear controller has many advantages excluding redundancy in system cost, space, control reliability and etc.

• 한국재난정보학회 논문집
• /
• 제12권1호
• /
• pp.32-39
• /
• 2016

본 연구에서는 공공기관 대상 재해경감활동관리체계를 구축 및 관리할 수 있는 지원 프로그램을 개발하고자 ISO22301 등 업무연속성관리/기능연속성계획 표준문서와 해외 선진 사례를 분석하여 프로그램에서 필요로 하는 요구기능을 도출하였다. 그 결과 시스템 관리를 위한 기능을 제외하고, 영향분석 리스크 평가 경감활동 대응계획 교육 및 모의훈련 재난대응 문서관리가 도출되었다. 향후 업무연속성관리 및 기능연속성계획의 요구조건을 만족하는 공공기관 재해경감활동관리체계 구축 지원프로그램을 개발할 수 있을 것으로 기대된다.

• 한국항행학회논문지
• /
• 제9권2호
• /
• pp.87-92
• /
• 2005

본 연구에서는 산업용 무인 헬리콥터의 자율비행을 위한 일환으로 퍼지 제어기를 이용하여 고도제어를 하였다. 본 논문에서는 가솔린 엔진을 사용하는 전장 3m급의 무인 헬리콥터를 설계하고 이의 재원을 이용하여 Takagi-Sugeno-Kang 형의 퍼지 제어기법으로 고도 제어기를 구성하였다. 목표 고도값과 고도의 오차, 그리고 속도를 이용하여 입력 선형 맴버쉽 함수를 생성하였다. 이렇게 구성된 멤버쉽 함수를 이용 제어입력을 생성하였고, 생성된 제어입력을 이용하여 메인 로터의 피지를 제어하고 그 결과를 이용하여 속도와 고도를 구하였다. 시뮬레이션을 통하여 설계한 퍼지제어기의 고도제어 성능을 평가하였다.