• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.5
• /
• pp.681-688
• /
• 1996

To investigate the effort of drying methods on the physicochemical properties of agar, gel strength, viscosity, melting and setting point, and phase transition by differential scanning calorimetery (DSC) during its heating were determined. In addition the structural differences of agar powder by scanning electron microscope (SEM) was examined. The most shortest onset temperature of gel strength increase was extruding method among any other methods. Viscosity of agar with hot air method, 400.00 cps at $45^{\circ}C$, was markedly increased, but with spraying and extruding ones were little change. The melting and setting point, and the temperature for maximum endothermic and enthalpy for agar with extruding one, $80.01^{\circ}C,\;36.05^{\circ}C\;and\;61.72^{\circ}C,\;0.73\;cal/g$, respectively, were lowest among the drying ones. But in the case of reheating after gelling, there were little change in all methods. Observing the surface structure of agar with SEM, extruding method showed the most unstable with absorptive property.

• Clean Technology
• /
• v.23 no.2
• /
• pp.133-139
• /
• 2017

Bio-based plastics containing the biomass content higher than 25 wt% have been considered as environment-friendly materials due to their effects on the reduction in the $CO_2$ emission and petroleum consumption as well as biodegradability after use. In this study, poly vinyl chloride, plant-derived plasticizers, by adding a biodegradable catalyst was observed a change in the biodegradability and physical properties. To produce the oxidative decomposition transparent bio film, which is broken down in the initial percent elongation and physical properties such as tensile strength, it was to test the safety of the product as a food packaging material. Poly vinyl chloride, primary plasticizer, secondary plasticizer, anti fogging agent, the combined stabilizer were mixed in a high speed mixer, then extruded using an extrusion molding machine, after cooling, winding, to produce a oxidative decomposition transparent bio film and the control film, with a thickness of $12{\mu}m$ through winder role. Mechanical properties tensile strength, elongation, and the maximum load elongation and biodegradation test. Transparent bio film produced by biodegradation catalyst is compared with the control film. Tensile strength and elongation of films were found to be no significant difference. Further, as a result of the biodegradation test for 45 days based on the ASTM D6954-04 method, biodegrability of film is 61.4%.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.2
• /
• pp.226-232
• /
• 2010

Incidence of tooth impaction varies from 5.6 to 18.8% of the population. Failure of eruption of the first and second permanent molars is rare; the prevalence in the normal population is 0.01% in case of the first permanent molar, and 0.06% in case of the second permanent molar. Permanent molars are particularly important for providing sufficient occlusal support and co-ordinating facial growth. Failure of eruption of permanent molars may result in various complications such as decrease in vertical dimension, posterior open bite, extrusion of antagonistic teeth, resorption and inclination of adjacent teeth, formation of cyst and so on. Treatment options of impacted teeth are periodic observation, surgical exposure, surgical exposure with subluxation, orthodontic relocation, and surgical extraction before prosthetic treatment. Early diagnosis and treatment are important, because delayed treatment induces various problems such as decreased spontaneous eruptive force, decreased successful percentage, increased treatment period, increased various complications. Prevalence of the failure of mandibular first molars is rare but eruptive guidance before extraction of impacted teeth is necessary due to importance of permanent molars. We reported two cases of surgical exposure of impacted mandibular first molar. In these cases, we could observe different result of the impacted mandibular first molar after surgical exposure.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.615-620
• /
• 2015

Polypropylene (PP)/bamboo fiber (BF) composites were fabricated by twin screw extruder in order to investigate effects of the compatibilizer on physical properties of PP/BF composites. The content of BF changed from 10 to 25 wt% and that of the compatibilizer was fixed at 3 wt%. Maleic anhydride grafted PP (PP-g-MAH) was used to increase the compatibility between PP and BF as a compatibilizer. Chemical structures of the composites were confirmed by the existence of carbonyl group (C=O) stretching peak at $1,700cm^{-1}$ in FT-IR spectrum. Considering the degradation and mechanical properties, the optimum extrusion conditions were selected to be $210^{\circ}C$ and 100 rpm, respectively. There was no distinct changes in melting temperature of the composites, but the crystallization temperature increased by $10-20^{\circ}C$ owing to the heterogeneous nuclei of BF. It was checked that the optimum BF content was in the range of 15-20 wt% from the results of tensile and flexural properties of the composites. The effect of the compatibilizer on mechanical properties was confirmed by SEM images of fractured surface and contact angles.

• Journal of Embryo Transfer
• /
• v.10 no.1
• /
• pp.45-51
• /
• 1995

In order to determine the optimum condition and timing for in vitro maturation of oocytes to metaphase of meiosis II (M II), the immatured follicular oocytes were recovered by puncturing the large(1.0~1.5 mm in diameter) and small(<1.0 mm in diameter) follicles in the ovaries of rabbits treated intramuscularly with a single dose of 100 TU PMSG 68 hours previously. The follicular oocytes were classified into three grades by the attachment of cumulus cells. The Grade I and II follicular oocytes from large follicles were cultured in BO-DM medium with 10% FCS, 35 $\mu$g /nl of FSH, 10 $\mu$g /ml of LH and 1 $\mu$g /ml of estradiol-17$\beta$ at 39t in a 5% $CO_2$ incubator for 11 to 23 hours. In 3 hours interval during the culture period, the oocytes were harvested and their cumulus cells were removed with hyaluronidase. The denuded oocytes were stained with Hoechst 33342 dye and their meiotic status and extrusion of the first polar body (PB) were examined under a fluorescence microscope. Also the fragmentation of the first PB and the distance between the first PB and nucleus were examined. The results obtained were as follows: 1. The mean recovery rate of follicular oocytes from the large and small follicles was 59. 9 and 31.3%, respectively. The mean number of oocytes recovered per rabbit and the Grade I percentage were 14.6 and 94.4% in large follicles, but 2.1 and 61.1% in small follicles, respectively. All the parameters examined were different significantly (p<0.05) between both the folliclular size. 2. Most of the follicular oocytes(86.8%) were matured in vitro to M II phase in 14 hours in Grade I oocytes, but the significantly(p<0.05) less oocytes(45.5%) were matured in Grade II oocytes. 3. The first PB was extruded in most of the oocytes(94.7%) in 14 hours of culture with the fragmentation rate of 29.6%, but the fragmentation rate of the first PB increased significantly (p<0.05) as the culture period for maturation was longer to 20 hours(63.5%). 4. The distance between the first PB and nucleus was increased linearly (p<0.05) as the maturation time passed from 14(7.1$\mu$rn) to 23 hours(58.4$\mu$m). 5. From the above results it was concluded that the optimum time for in vitro maturation culture might be 14 hours in the follicular oocytes from rabbit primed with PMSG for 68 hours, expecially when these follicular oocytes were used for recipient cytoplasms in embryo cloning.

• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.949-956
• /
• 2003

For the Exp. 1, a total of sixty pigs(15.95${\pm}$0.09kg average initial body weight) were used in a 28-d growth assay to determine the effects of extruded chinese corn on growth performance and nutrient digestibility in nursery pigs. Dietary treatments included 1) UCORN(U.S. corn-SBM based diet), 2) CCORN(Chinese corn-SBM based diet) and 3) ECCORN(Extruded Chinese corn-SBM based diet). Overall period, average daily gain of pigs fed ECCORN diet was higher than that of pigs fed CCORN diet(547 vs 522 g/d), however, there was not significant difference. On day 10 of the experiment, pigs fed UCORN and ECCORN diet had significantly increased in DM and DE digestibilities compared to pigs fed CCORN diet(P〈0.05). Also, on day 24 of the experiment, pigs fed UCORN and ECCORN diet had a significant increase in DM digestibility compared to pigs fed CCORN diet(P〈0.05). Pigs fed ECCORN diet had significantly increased DE digestibility compared to pigs fed CCORN diet(P〈0.05). For the Exp. 2, three cannulated barrows(54.09kg average initial body weight) were used to determine the apparent ileal digestibilities of amino acids and nutrient digestibility of extruded corn in finishing pigs. Dietary treatments were the same as in Exp. 1. Apparent ileal digestibility of cystine was greater for UCORN and ECCORN than for CCORN(P〈0.05). Apparent digestibility of DM at the total tract was greater for UCORN and ECCORN than for CCORN(P〈0.05). Pigs fed UCORN and ECCORN diet had a significant increase in apparent total tract digestibility of N compared to pigs fed CCORN diet(P〈0.05). In conclusion, the results obtained from these feeding trials suggest that the extruded corn for nursery pigs had affected growth performance and DM and DE digestibilities. In finishing pigs, extruded corn was an effective means to improve apparent total tract digestibilities of DM and N.