• 한국산업융합학회 논문집
• /
• 제18권1호
• /
• pp.30-36
• /
• 2015

This paper presents the theoretical development of a complete navigation problem of a nonholonomic mobile robot by using ultrasonic sensors. To solve this problem, a new method to computer a fuzzy perception of the environment is presented, dealing with the uncertainties and imprecision from the sensory system and taking into account nonholonomic constranits of the robot. Fuzzy perception, fuzzy controller are applied, both in the design of each reactive behavior and solving the problem of behavior combination, to implement a fuzzy behavior-based control architecture. The performance of the proposed obstacle avoidance robot controller in order to determine the exact dynamic system modeling system that uncertainty is difficult for nomadic controlled robot direction angle by ultrasonic sensors throughout controlled performance tests. In additionally, this study is an in different ways than the self-driving simulator in the development of ultrasonci sensors and unmanned remote control techniques used by the self-driving robot controlled driving through an unmanned remote controlled unmanned realize the performance of factory antomation.

• Journal of Ship and Ocean Technology
• /
• 제11권1호
• /
• pp.1-10
• /
• 2007

This study introduces the development of robot fish ROFI 1.1. Today, robot fish is one of strong candidates for next-generation UUV. The present paper describes the design, manufacturing, and operation tests of the robot fish developed at Seoul National University. The very first robot fish in Korea, ROFI 1.1 is operated by a wireless remote controller. Its overall length is 680mm, and weight is 8.8kg. The fore body contains main mechanical and electrical systems and is covered by a FRP skin. The aft body has a mechanical bone system that mimics fish bones, and its skin is made of flexible silicon sponge to allow elastic motion for propulsion. It is found that this mechanical system creates effective and realistic fish-like swimming mode. It is observed that the normal and maximum advancing speeds of ROFI 1.1 are about 1 and 2 m/sec, and the turning radius is between $0.7{\sim}2.5m$, depending on the turning mechanism.

• 로봇학회논문지
• /
• 제13권4호
• /
• pp.248-255
• /
• 2018

In this paper, a design for a vehicle body of an armored robot for complex disasters is described. The proposed design considers various requirements in complex disaster situations. Fire, explosion, and poisonous gas may occur simultaneously under those sites. Therefore, the armored robot needs a vehicle body that can protect people from falling objects, high temperature, and poisonous gas. In addition, it should provide intuitive control devices and realistic surrounding views to help the operator respond to emergent situations. To fulfill these requirements of the vehicle body, firstly, the frame was designed to withstand the impact of falling objects. Secondly, the positive pressure device and the cooling device were applied. Thirdly, a panoramic view was implemented that enables real-time observation of surroundings through a number of image sensors. Finally, the cockpit in the vehicle body was designed focused on the manipulability of the armored robot in disaster sites.

• 대한임베디드공학회논문지
• /
• 제16권1호
• /
• pp.29-34
• /
• 2021

We developed a pet care robot that can be controlled outdoors. Through the smartphone application, the pet owners can watch the situation in the house and manipulate the robot to make their pet happy. The video data in the house is transmitted to the application through the webcam installed at the house. The robot can not only perform user's command but also do six basic macro action. The obstacle avoidance function using the current sensor can be activated if the user want to use. When the robot hits to something, it moves back and rotates by arbitrary angle, and then moves forward.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.82-85
• /
• 2003

In this paper, in order to deduce the deep structure of a set of fuzzy rules from the surface structure, we use co-evolutionary algorithm based on modified Nash GA. This algorithm coevolves membership functions in antecedents and parameters in consequents of fuzzy rules. We demonstrate this co-evolutionary algorithm and apply to the mobile robot control. From the result of simulation, we compare modified Nash GA with the other co-evolution algorithms and verify the efficacy of this algorithm through application to fuzzy systems.

• 센서학회지
• /
• 제16권4호
• /
• pp.286-293
• /
• 2007

For safe walking of the people who are blind, walking assistance robot which can detecting and avoiding the obstacle was investigated. The implemented prototype walking assistance robot consists of a obstacle detecting module, a user interface using acoustic signal and a driving module. The obstacle detecting module uses 6 ultrasonic sensors those located at the front part of the robot can perceive the obstacle which is in 3 meter distances and $180^{\circ}$ degrees. It calculates the distance and degree from the obstacle using TOF (time of flight) method and decides the 3-dimensional location of the obstacle. The obstacle information is delivered to the user using acoustic alarm and guide sound. The robot is designed to avoid by itself when the obstacle is detecting and the user only follows it to safe walking. After the designed robot was implemented, driving and obstacle detecting experiments were carried out. The result showed that the designed walking assistance robot will help the people who are blind to walk around safe.

• 한국산업융합학회 논문집
• /
• 제19권2호
• /
• pp.81-87
• /
• 2016

This paper presents a new approach to control of stable motion of single wheel driving robot system of a pitch that is controlled by an in-wheel motor and a roll that is controlled by a reaction wheel. This robot doesn'thave any actuator for a yaw axis control, which makes the derivation of the dynamics relatively simple. The Lagrange equations was applied to derive the dynamic equations of the one wheel driving robot to implement the dynamic speed control of the mobile robot. To achieve the real time speed control of the unicycle robot, the sliding mode control and optical regulator are utilized to prove the reliability while maintaining the desired speed tracking performance. In the roll controller, the sigmoid-function based robust controller has been adopted to reduce the vibration by the situation function. The optimal controller has been implemented for the pitch control to drive the unicycle robot to follow the desired velocity trajectory in real time using the state variables of pitch angle, angular velocity, angle and angular velocity of the driving wheel. The control performance of the control systems from a single dynamic model has been illustrated by the real experiments.

• 한국산업융합학회 논문집
• /
• 제18권2호
• /
• pp.119-128
• /
• 2015

In this paper, we propose a new motion control technology to design robust control system of industrial robot. The system modeling of robotic manipulation tasks with constraints is presented, and the control architecture for unconstrained and constrained motion system with parametric uncertainties is synthesized. The optimal reference of robot manipulator is generated by the reference controller as a discrete state system and the control behavior of constrained system which has poor modeling information and time-invariant constraint function is improved motion control system is successfully evaluated by experiment to the desired tasks.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.63-64
• /
• 2006

In this paper, design modification was performed to improve the structure of ex-developed 12 D.O.F Biped walking robot, KUBIR-1 similar with human beings. The motion of KUBIR-1 was slow and had a limited walking space. Hence I designed an improved BWR named KUBIR-2 with 12 degree of freedom. KUBIR-2 was designed to solve the following problems of KUBIR-1. First, KUBIR-2 was more simply designed in the four-bar-link mechanism, and its weight was reduced. Second, it had the built-in controller and motor driver. Third, walking velocity of KUBIR-2 was increased by improvement of speed and motion joint angle range. In addition to these, we modified the structure of the foot for more stable walking.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.479-482
• /
• 2005

본 연구는 알루미늄 단조 라인의 가열로 컨베이어에 적용된 6관절 이송용 로봇에 Machine Vision System을 구축 한 것으로 이송용 로봇이 작업 대상물을 적재하기 위한 위치정보를 획득하고 재처리하여 로봇 컨트롤러에 제공하는 비주얼가이던스 기법을 연구하여 이를 적용하였다. 적용된 Machine Vision System이 실제 구동에 있어서 안정함을 확인하였다. Machine Vision System에 적용된 CCD 센서로는 Sony사의 XC-HR50이 적용되었으며 Frame Grabber는 Matrox Meter II 카드가 적용되었다. Machine Vision System 제어기로는 범용PC(2.4Ghz, Windows 2000)를 사용하였으며 제어Software는 Microsoft 사의 Visual Basic 6.0 version을 사용하였다.