• 기술발표회
• /
• s.2006
• /
• pp.311-319
• /
• 2006

Artesian Pressure exists in Hwa Jeon Project Site of Nakdong Delta Area. Maxium value of the pressure ranges between 06 tonf/m2 and 1 3 tonf/m2 in the design site. This paper presents a design case study considering the Artesian Pressure to calculate the consolidation settlement of the deep marine clay.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2007.09a
• /
• pp.74-78
• /
• 2007

In this paper, the HPMM(Horizontal Planar Motion Mechanism) test is simulated in a numerical towing tank by using a commercial CFD(Computational Fluid Dynamics) code, FLUENT. The results of calculation are compared with those of static drift test or rotating arm test calculated by CFD to verify the results simulated by CFD. Through comparing pure sway test of HPMM test with static drift test and pure yaw test of HPMM with rotating arm test, it is found that HPMM test can be simulated in the numerical towing tank.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.891-898
• /
• 2009

A high rock embankment by means of dynamic compaction has hardly carried out in domestic area. For the successful accomplishment of such a high rock embankment, construction quality and measurement control are conducted. Plate loading tests are carried out to verify the bearing capacity and safety against the long term settlement. In addition, settlement of each layer is measured in order to verify the effect of dynamic compaction and to predict long term settlement.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.787-799
• /
• 2007

The Singapore construction market has just recovered from the decline of the last seven years. Past annual construction volume remains around S$10 to 12 billion and the market is saturated with local and international contractors. This study examined the competitiveness of the construction market from the perspective of a Chinese contractor. The case company in this study is China Construction (SP) Development Co Pte Ltd. The purpose of this study is to use strategic research and management methods to analyze the case company's internal and external environment and development strategies, so as to bring about the approaches and measures to achieve its strategic targets.

• Asia pacific journal of information systems
• /
• v.16 no.4
• /
• pp.179-202
• /
• 2006

The objective of this study is to identify the impacts of communication reinforcement on performance of learning in Web-PBL. Communication reinforcement is defined as the combination of information sharing and co-construction. As factors facilitating communication reinforcement, we propose learner's characteristics, task characteristics, and group characteristics. Learner's characteristics are collaboration-orientation, openness, holistic approach, and online community-orientation which reflects e-learning environment. Collaboration-oriented tasks as group projects were developed and given to groups with 5-6 members. The group characteristics are categorized into 'horizontal' and 'vertical', according to the patterns of communication between a group leader and members. To verify empirically the proposed research model, an experimental design was performed to learners who took on-line and off-line courses with group projects. We found important results as follows; First, field dependence has positive impacts on information sharing, and online community-orientation has positive impacts on co-construction. These results correspond with prior studies on relationship between field dependence and collaborative learning. Second, collaboration-oriented task directly impacts on information sharing, and indirectly affects co-construction, This result implicates that information sharing is pre-requisite of co-construction. Third, 'horizontal' was identified as a factor giving positive effects on information sharing and co-construction. This result implies that horizontal communication is very important to facilitate communication reinforcement.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.207-215
• /
• 2004

There are various characteristics called for in work roll and intermediate rolls for cold rolling mills. Among these characteristics, the two main requirements are to ensure the quality of the rolled products and to reduce roll cost. To achieve these needs, resistance to wear, to thermal shock and to contact fatigue are especially important. This paper describes that new material(named DSR1) for intermediate rolls which greatly increases rolling campaign and improves resistance to wear has been developed. DSR1 was successfully manufactured and has been used in the cold rolling mill. It showed that Trial product was homogenous in hardness distribution and sufficient usable diameter. Also in service test, trial product is much more excellent rolling performance than conventional $5\%Cr$.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.149-150
• /
• 2011

Recently, Goverment's Energy-saving policy in Korea as 'Green Growth' is very remarkable effort. By intensive poliicies, the private is encouraged to participate in policy. Especially, it is very important in the field of architecture and we have to work for construction of law system. However, these efforts of the government buildings for energy efficiency in use stage is as mandatory system that may occur in the construction phase and the enviromental impact of greenhouse gas reductions is not affected. For this reason, Assess the amount of the energy consumption and CO₂ emissioont of Government Buildings in 2010 ordered by PPS(Public Procurement Service) in the construction phase and suggest to recognize the need for legal restrictions.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.141-142
• /
• 2013

The modular construction method have improved quality, reduction of defects, such as the reduction of air, a number of advantages. It is utilized composite, larger, in skyscraper building already abroad. The domestic, various studies have been conducted on technical matters taller, automation of production, such as process control, but is still inadequate circumstances. Therefore, in this study, is the purpose that you have presented activation measures to investigate and analyze the case of co-housing with a modular construction system of outside, and to make the co-housing of modular construction system of domestic.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.685-691
• /
• 2009

Recently, public office building projects are being recognized by many construction engineers and researchers, as the critical projects in the construction industry. The project budgets have sometimes exceeded due to the lack of core knowledge, experiences, skills and experts concerned in cost planning and estimating in the pre-construction stage. It has been highlighted that planning and estimating effectively the cost of public office building projects as critical in the design stage. Within this context, some cost data books and systems, such as RSMeans cost data systems and Spon's price book, have been systematically developed and used by many construction cost managers and organizations in order to effectively estimate and use their project budgets. As a result of this research, a cost estimating model for finishes has been developed, considering the cost data used in public office building projects.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.275-280
• /
• 2006

The protection of the environment is one of today's key demanding international activities and interests. All of aspects including industry, economy and society should be changed into environmental friendly industries. The building is not exception in this trend. What is not generally realized is that building, in the lifecycle of construction, use and demolition, account for large construction, not considered with environment impact and conservation in the lifecycle. Expecially, the construction materials and components used in the construction stage has much embodied energy. And much $CO_2$ emit on the production of the construction material and component. The energy use and $CO_2$ emission would continuously diminish the limited natural resources and impact the environment such as ozon layer destruction. In this paper, it studied the estimation of the amount of energy use and $CO_2$ emission in the building construction stage, it would provide the estimation process and applied with the multifamily housing.