• 제목/요약/키워드: Co-Construction

검색결과 3,776건 처리시간 0.039초

품패자산조성부분간적상호관계(品牌资产组成部分间的相互关系): 관우산품충류조절작용적탐색연구(关于产品种类调节作用的探索研究) (Relationships among Brand Equity Components: An Exploratory Study of the Moderating Role of Product Type)

  • Moon, Byeong-Joon;Park, Won-Kyu;Choi, Sang-Chul
    • 마케팅과학연구
    • /
    • 제20권1호
    • /
    • pp.98-109
    • /
    • 2010
  • 对于品牌资产的组成, 测量和管理的研究开始于David A.Aaker (1991) 和Kevin Lane Keller(1993). 最近, 很多的研究都集中于品牌资产的组成: 品牌意识, 质量预期, 产品形象和品牌忠诚度. 本文主要针对于这些成分间相互关系, 而且特别主意产品种类(实用或者享受)的调节作用. 基于以上所提及的关系所建立的模型可以参看图1. 本文的假设如下: 顾客的品牌意识对于顾客的忠诚度和品牌形象有积极的影响; 顾客的质量预期对于品牌忠诚度和品牌形象有积极的影响; 品牌形象对于品牌忠诚度有积极影响; 这些品牌资产成分间的关系可以被产品种类所调节. 具体说明就是, 对于实用性产品, 质量预期对于品牌忠诚度的作用会增强, 而对于享受产品品牌形象对于品牌忠诚度的作用会更强. 为了确定适用于本研究的产品, 58名首尔的大学生参加了前测. 结果是计算机被选择成为实用性产品, 而牛仔裤被选定成为享受产品. 每一种产品各选择了两个品牌: 三星和惠普以及李维斯和NIX. 在研究中, 首尔地区的237名大学生回答了问卷. 研究对象被划分为两组: 一组(121名)回答关于计算机的问卷, 其他的116名回答关于牛仔裤的问卷. 搜集的数据通过AMOS 7来验证可信度, 效度以及变量间的相互关系. 验证性因子分析证明本研究的模型是可以用来进一步研究的. 品牌资产成分间的相互关系也通过AMOS 7 来验证. 结果模型的结果展现在图2中. 质量预期对于品牌的形象有积极的影响, 但是品牌意识却没有. 但是品牌意识, 质量预期, 以及品牌形象都对品牌忠诚度有积极的影响. 并且, 这些关系受到产品种类的调节. 本文的研究结果可以增进我们对于品牌资产成分间相互关系的了解, 并且可以支撑对于品牌资产的测量. 本文也对于产品种类的作用进行了阐述. 在现实的营销管理中, 这些结果可以提供一些建议来有效保持品牌资产.

제주 생물권보전지역 내 한라산국립공원의 경관분석 : 단편화 현상 (Landscape Analysis of the Hallasan National Park in a Jeju Island Biosphere Reserve: Fragmentation Pattern)

  • 강혜순;김현정;장은미
    • 한국환경생태학회지
    • /
    • 제22권3호
    • /
    • pp.309-319
    • /
    • 2008
  • 도로는 생태계를 교란시키는 인간 활동의 지표이며 흔히 서식지 단편화, 서식지 축소, 서식지 고립을 유발한다. 제주도의 한라산국립공원(면적=153.4$km^2$)은 지형, 지질, 생물상의 특이성이 높으며 유네스코 생물권보전지역(MAB)의 핵심지역으로도 중복 지정되어 있다. 공원의 이러한 높은 보전가치가 많은 탐방객과 도로건설을 유도하고 있음에도 불구하고 도로로 인한 경관의 변화는 거의 알려진 바가 없다. 본 연구에서는 GIS를 활용하여 한라산국립공원의 도로로 인한 서식지 단편화 양상을 공원 용도지구, 해발고도, 식생에 관련하여 분석하였다. 포장도로와 법정 비법정탐방로에 각각 112m, 60m 버퍼를 적용시킨 결과 한라산국립공원은 총 100개의 단편으로 나뉘었다. 포장도로와 법정탐방로만을 고려했을 때 드러난 10단편의 면적은 $0.002km^2-38.2km^2$(평균면적=14.2 $km^2$)에 이르렀고 자연보존지구와 자연환경 지구 모두에서 각기 약 7%가 가장자리로 판정되었다. 이들 단편의 형태지수 평균은 5.19(100단편 중), 7.22(10단편 중)이었지만 공원의 동서 양단과 정상부근에 있는 단편들의 형태지수가 보다 높았다. 5개의 법정탐방로가 모두 분화구까지 연결되어 있고 고도가 높아짐에 따라, 활엽수림, 침엽수림, 초지로 식생이 전환되기 때문에 높은 고도, 특히 고유식물과 고산식물이 많은 고도 1,400m이상의 초지에서 서식지 면적이 현저하게 감소했다. 이런 결과는 한라산국립 공원도 도로로 인한 서식지 단편화를 겪고 있으며, 단편화로 인한 서식지 악화와 서식지 소실의 위험이 공원의 자연환경 지구보다 한라산 정상의 백록담을 중심으로 하는 자연보존지구에서 더 높을 수 있음을 보여준다. 따라서 한라산국립공원의 현 도로망은 생태계 보전과 보호라는 국립공원의 목표에 부합하지 않는다고 사료된다. 한라산국립공원 전체가 또한 MAB 핵심지역임을 고려한다면, 공원 용도지구의 재설정과 단편화를 완화시키기 위한 공원 내 도로관리에 보전노력이 경주되어야 할 것이다.

산업장 교대근무 근로자의 건강증진행위 예측요인 (Predictive Factors of Health promotion behaviors of Industrial Shift Workers)

  • 김영미
    • 한국직업건강간호학회지
    • /
    • 제11권1호
    • /
    • pp.13-30
    • /
    • 2002
  • Industrial shift workers feels suffer mental stresses which are caused by unfamiliar day sleep, noisy environment, sleeping disorder by bright light, unusual contacts with family, difficulty in meeting with friends or having formal social meetings and other social limitations such as the use of transportation. Such stresses influence health of the workers negatively. Thus the health promotion policy for shift workers should be made considering the workers' ways of living and shift work specially. This study attempted to provide basic information for development of the health promotion program for industrial shift workers by examining predictive factors influencing health promotion behaviors of those workers. In designing the study, three power generation plants located in Pusan and south Kyungsang province were randomly selected and therefrom 280 workers at central control, boiler and turbine rooms and environmental chemistry parts whose processes require shift works were sampled as subjects of the study. Data were collected two times from September 17 to October 8, 1999 using questionnaires with helps of safety and health managers of the plants. The questionnaires were distributed through mails or direct visits. Means for the study included the measurement tool of health promotion behavior provided by Park(1995), the tool of self-efficacy measurement by Suh(1995), the tool of internal locus of control measurement by Oh(1987), the measurement tool of perceived health state by Park(1995) and the tool of social support measurement by Paek(1995). The collected data were analyzed using SPSS program. Controlling factors of the subjects were evaluated in terms of frequency and percentage ratio Perceived factors and health promotion behaviors of the subjects were done so in terms of mean and standard deviation, and average mark and standard deviation, respectively. Relations between controlling and perceived factors were analyzed using t-test and ANOVA and those between perceived factors and the performance of health promotion behaviors, using Pearson's Correlation Coefficient. The performance of health promotion behaviors was tested using t-test, ANOVA and post multi-comparison (Scheffe test). Predictive factors of health promotion behavior were examined through the Stepwise Multiple Regression Analysis. Results of the study are summarized as follows. 1. The performance of health promotion behaviors by the subjects was evaluated as having the value of mean, $161.27{\pm}26.73$ points(min.:60, max.:240) and average mark, $2.68{\pm}0.44$ points(min.:1, max.:4). When the performance was analyzed according to related aspects, it showed the highest level in harmonious relation with average mark, $3.15{\pm}.56$ points, followed by hygienic life($3.03{\pm}.55$), self-realization ($2.84{\pm}.55$), emotional support($2.73{\pm}.61$), regular meals($2.71{\pm}.76$), self-control($2.62{\pm}.63$), health diet($2.62{\pm}.56$), rest and sleep($2.60{\pm}.59$), exercise and activity($2.53{\pm}.57$), diet control($2.52{\pm}.56$) and special health management($2.06{\pm}.65$). 2. In relations between perceived factors of the subjects(self-efficacy, internal locus of control, perceived health state) and the performance of health promotion behaviors, the performance was found having significantly pure relations with self-efficacy (r=.524, P=.000), internal locus of control (r=.225, P=.000) and perceived health state(r=.244, P=.000). The higher each evaluated point of the three factors was, the higher the performance was in level. 3. When relations between the controlling factors(demography-based social, health-related, job-related and human relations characteristics) and the performance of health promotion behaviors were analyzed, the performance showed significant differences according to marital status (t=2.09, P= .03), religion(F=3.93, P= .00) and participation in religious activities (F=8.10, P= .00) out of demography-based characteristics, medical examination results (F=7.20, P= .00) and methods of the collection of health knowledge and information(F=3.41, P= .01) and methods of desired health education(F=3.41, P= .01) out of health-related characteristics, detrimental factors perception(F=4.49, P= .01) and job satisfaction(F=8.41, P= .00) out of job-related characteristics and social support(F=14.69, P= .00) out of human relations characteristics. 4. The factor which is a variable predicting best the performance of health promotion behaviors by the subjects was the self-efficacy accounting for 27.4% of the prediction, followed by participation in religious activities, social support, job satisfaction, received health state and internal locus of control in order all of which totally account for 41.0%. In conclusion, the predictive factor which most influence the performance of health promotion behaviors by shift workers was self-efficacy. To promote the sense, therefore, it is necessary to develop the nursing intervention program considering predictive factors as variables identified in this study. Further industrial nurses should play their roles actively to help shift workers increase their capability of self-management of health.

  • PDF

철근콘크리트 부재의 최소전단보강근비의 평가 (Evaluation of the Minimum Shear Reinforcement Ratio of Reinforced Concrete Members)

  • 이정윤;윤성현
    • 콘크리트학회논문집
    • /
    • 제16권1호
    • /
    • pp.43-53
    • /
    • 2004
  • 철근콘크리트 부재가 취성적이며 국부적으로 파괴되지 않도록 하기 위하여 각 기준식에서는 철근콘크리트 부재의 최소전단 보강근비를 요구하고 있다. 우리나라에서 현재 사용되고 있는 철근콘크리트 구조설계기준의 최소전단철근비에 대한 기준식과 캐나다 기준식, 유럽 기준식, 일본건축학회 기준식을 비교하면 각 기준식에 의하여 계산된 최소전단보강근비 값에는 많은 차이가 있어 그 신뢰성에 의문을 갖게 한다. 즉, 동일한 콘크리트의 실린더 압축강도에 대하여 각 기준식의 최소전단보강근비 값은 최대 2배 이상의 차이가 있다. 또한, 최소전단보강근비에 영향을 주는 요소가 각 기준식마다 다르며, 이에 대한 연구도 그 중요성에 비하여 극히 적은 실정이다. 이연구에서는 트러스 모델에 근거한 이론적인 방법에 의하여 철근콘크리트 부재의 최소전단보강근비를 예측하였다. 제안식에는 최소전단철근비에 영향을 주는 콘크리트의 압축강도, 전단보강근의 항복응력, 주근비, 전단경간비의 영향이 고려되었다. 제안식에 의하여 계산된 최소전단철근비는 콘크리트 압축강도에 따라 변화하며, ACI 318-02 및 캐나다 규준과 비슷한 분포를 나타냈다. KCI-99 및 ACI 318-02의 최소전단철근비는 주인장철근비에 관계없이 일정하지만 제안식에 의한 최소전단철근비는 주인장철근비가 증가할수록 줄어드는 양상을 보였다. 또한, 전단경간비에 따른 최소전단철근비에 대하여 KCI-99 및 ACI-318-02에 의한 최소전단철근비는 전단경간비에 관계없이 일정한 값을 보였지만 제안식에 의한 최소전단철근비는 전단경간비가 증가할수록 증가하는 양상을 보였다.변화로 인한 resetup의 번거러움을 줄일 수 있었고 환자에게 인위적으로 치료 자세를 유지해야하는 불편함을 해소할 수 있었다. 궁극적으로는 set-up의 재현성을 유지해 보다 정확한 치료를 가능하게 했고 앞으로 이 고정용구를 보완, 개선시켜서 환자의 치료에 활용한다면 더욱더 질적으로 향상된 치료를 제공 할 수 있을 것으로 사료된다.하였다. IV. 결론 Forward IMRT는 2차원적인 치료법에 비하여 PTV에는 균일한 선량분포를 이루면서 정상조직에는 tolerance dose 이하로 선량을 전달 할 수 있는 치료기법이었다. 계속적으로 평가할 필요가 있을 것이다.> 최대 $11.65\%$까지 골조직에 의한 선량감소가 나타나는 것을 알 수가 있다. 또한, Diode detector로 측정한 심부선량 값은 두부, 경부, 대퇴부, 슬관절, 족관절에서 각각 $95.23{\pm}1.18,\;98.33{\pm}0.6,\;93.5{\pm}1.5,\;87.3{\pm}1.5,\;86.90{\pm}1.16$으로 나타났으며, TLD로 측정한 대퇴부, 슬관절, 족관절에서의 표면선량과 비교했을 때 부위에 따라 최소 $4.53\%{\sim}$ 최대 $12.6\%$ 까지 차이를 보였다. 그리고 골조직에 의한 선량감쇄의 영향이 적은 복부(배꼽)에서는 열형광선량계 및 다이로드측정기로 측정한 값이 각각 $101.58{\pm}0.95,\;104.77{\pm}1.18$로 큰 차이가 없었다. IV 결론 전신방사선조사시 표면선량을

지표수 조건의 나노여과공정에서 파울링 및 스케일링이 화약류 물질 잔류에 미치는 영향 연구 - 케익층 형성 및 농도분극 영향 분석 (Effects of Fouling and Scaling on the Retention of Explosives in Surface Water by NF-the Role of Cake Enhanced Concentration Polarisation)

  • 허지용;한종훈;이희범;이종열;허남국
    • 한국지반환경공학회 논문집
    • /
    • 제16권4호
    • /
    • pp.13-22
    • /
    • 2015
  • 나노여과공정에서 폭발 오염물질인 TNT(2, 4, 6-Trinitrotoluene), RDX(Hexahydro-1, 3, 5-trinitro-1, 3, 5-triazine) 및 HMX(1, 3, 5, 7-Tetranitro-1, 3, 5, 7-tetrazocane) 화약류의 잔류에 용존유기물의 오염과 무기물의 스케일링에 의한 케익층 형성 및 농도분극의 영향성을 분석하였다. 지표수 조건의 휴믹산 농도에 의한 나노여과공정에서는 용존유기물에 의한 나노여과막 오염이 발생되어도 플럭스의 큰 변화가 없는 것으로 나타났으며, 휴믹산과 무기 스케일링이 동시에 발생되었을 경우에는 나노여과공정에서 플럭스의 감소가 큰 것으로 나타났다. 휴믹산과 $Ca_3(PO_4)_2$을 혼합하였을 때 플럭스 투과량이 42% 감소하였고 휴믹산만 첨가하였을 경우에 플럭스 투과량은 8% 감소한 것으로 나타났다. 이는 NF 막의 $Ca_3(PO_4)_2$스켈턴트 결정과 용존유기물이 칼슘($Ca^{2+}$)이온의 상호작용에 의해 막 표면에 증강된 케익층을 형성하여 NF 막의 플럭스를 감소시키는 것을 알 수 있었다. 그리고 막의 크기배제에 의한 선택성을 기반으로 하여 폭발물의 나노여과막에 의한 잔류량을 조사할 경우 HMX(296.15, 83%) ${\gg}$ RDX(222.12, 49%) ≋ TNT(227.13, 32%)로 나타났다. 막 오염과 스케일링은 케익층의 형성으로 막 표면에서 증대된 농도 분극효과를 나타낼 수 있으나, 무기 스케일링 형성과 휴믹산에 의한 화약류의 잔류 영향성은 순수한 DI 및 NaCl 피드용액의 여과공정 결과와 크게 다르지 않는 것으로 나타났다. 이는 전량여과방식(Dead-end Flow)의 나노여과공정에서 화약류의 잔류 영향성은 임계크기에 의한 선택적 배제성이 케익층 형성 및 농도분극에 의한 잔류 영향성보다 크다는 것을 보여준다.

LCC 기법을 통한 가축분뇨처리시설의 경제성 분석 (Economic Analysis of the Livestock Manure Treatment System Using Life-Cycle Cost Technique)

  • 김재환;조승희;곽정훈;최동윤;정광화;정의수;정만순;박성균
    • 한국축산시설환경학회지
    • /
    • 제17권sup호
    • /
    • pp.61-68
    • /
    • 2011
  • 본 연구는 가축분뇨 처리시설의 평가 및 최적 선택의 의사결정에 있어서, 시설물은 내구성이 있는 자산이므로 내용연수 전 기간에 걸친 비용측면에서의 경제성이 고려되어야 하는 바, 이를 위하여 LCC (Life Cycle Cost) 기법의 적용 가능성을 검토하고자 수행하였다. 경제성의 비교 분석을 위해 양돈 분뇨 1일 100톤 처리규모의 공동자원화시설 설치 공법들 중 4개 공법에 대한 시설투자 및 연간 운영비를 조사하였는데, 초기 투자비는 2,699~3,202 백만원 수준으로 T 공법이 가장 높았고 E 공법이 가장 낮았다. 연간 운영비에 있어서는 378~498 백만원 수준으로 T 공법, J 공법, E 공법, B 공법 순으로 유리한 것으로 조사되었다. LCC 분석을 위해 한국은행 및 통계청의 10년간 ('00~'09) 자료를 이용하여 이자율 (4.7%), 물가상승율 (3.13%), 실질 할인율 (1.52%)를 기준하고, 현가계수 산정을 위해 내용연수를 토목 건축 (30년), 기계 (10년), 전기계장 (15년) 으로 기준하였다. 이를 바탕으로 한 분석 결과, 톤당 운영비로 보면 17,570~18,998원/톤 수준으로서 E공법이 17,570원/톤으로 가장 낮은 반면, B 공법이 20,661원/톤으로 가장 높아 상대적으로 가장 비경제적이었다. 특히 초기투자비가 높더라도 연간 운영비가 낮은 T 공법이 초기투자비는 T 공법보다 낮으나 연간 운영비가 상대적으로 높은 B 공법에 비해 LCC가 낮게 평가되었다. 따라서 가축분뇨 처리시설의 경제적 측면에서의 공법 선택에 있어서는 초기시설투자비 또는 연간 운영비 중 어느 한쪽만 평가하여 결정하기 보다는 LCC 분석을 적용하여 평가하는 것이 합리적임을 알 수 있다. 또한 경제성 분석에 있어서, 불확실성에 따른 LCC 분석 결과의 변화를 파악하기 위해 '00~'09년 간의 할인율 변동폭을 적용하여 민감도분석을 실시한 결과, 변동범위 안에서 변화하더라도 각 대안별 비용우위에 대한 변화는 달라지지 않아 안정적이라고 할 수 있다. 따라서 LCC를 이용한 경제성 평가는 가축분뇨 처리시설의 선택을 위한 의사결정에 유용한 평가 지표가 될 수 있으리라 판단된다. 향후 분석의 신뢰성 제고와 활성화를 위해서는 각 비용요소들에 대해 공신력 있는 데이터베이스 구축이 대단히 중요하며, 아울러 시설평가 시 정성적인 요인도 고려할 수 있는 연구가 추가적으로 이루어져야 할 것이다.

대구시내 종합병원 응급실에 찾아온 소아사고 환아의 사고원인 (Causes of Childhood Injuries Observed at the Emergency Rooms of Five Hospitals in Taegu)

  • 박정한;배영숙
    • Journal of Preventive Medicine and Public Health
    • /
    • 제21권2호
    • /
    • pp.224-237
    • /
    • 1988
  • 소아사고의 원인과 발생시 상황을 조사하여 사고의 예방대책을 수립하는 자료를 얻고자 1987년 1월 1일부터 1987년 12월 31일까지 대구시내 3개 대학병원과 2개 종합병원 응급실에 찾아온 만 15세 미만의 총 소아환자 15,790명 중 사고환아 4,849명(30.7%)을 대상으로 사고원인, 사고의 발생장소와 시간 등을 조사하였다. 자료는 응급실 진료부와 입원 병력지에서 얻었다. 전체 사고환아의 54.6%가 3-8세 사이였고 총 사고환아의 남녀 성비는 약 2:1로써 남아가 많았다. 사고원인은 추락 또는 넘어져 다친 경우 29.1%와 교통사고 28.2%로 가장 많았다. 사고의 원별 분포는 5-10월 사이가 다른 달보다 더 많았다. 1일중 사고 발생시간은 오후 3-8시 사이에 51.6%가 일어났다. 추락 또는 넘어져 다친 장소는 계단이 25.7%로 가장 많았다. 폭력에 의한 사고는 놀이시 부주의로 인한 경우가 85.6%로 대부분이었으며 강간도 11건이 있었다. 교상은 개에게 물린 경우가 67.6%를 차지했으며 남아와 여아의 비가 2.9:1로써 남아가 많았다. 중독사고는 일산화탄소 중독이 45.3%로 많았으며 화상은 뜨거운 물, 또는 음식물에 의한 것이 85.2%를 차지했다. 물에 빠진 경우는 강물에서 32.2%, 수영장에서 22.6%, 공사장에서 19.3%를 차지했다. 소아사고를 예방하기 위해 우리의 생활환경에서 위험요인을 제거하고, 어린이가 안전하게 놀 수 있는 놀이터를 마련해 주고, 어린이에게는 학교 교육을 통해, 그리고 일반대중에게는 대중매체를 통해 안전교육을 지속적으로 실시하고, 그리고 주택, 공공건물 및 시설, 놀이터, 주방용기를 포함한 공산품의 안전기준을 설정 또는 강화하여 규제해야 할 것이다.일 하중 조건하에선 점막에 나타나는 등가 응력의 크기 및 분산양태는 유사하였다. 5. 하악골에서 등가 응력은 의치지지 부위에만 국한되지 않고 넓게 분산 되었으며 의치상 종류 및 하중 조건에 관계없이 치조제 후방 및 하악연의 후방 부위에 특히 높은 등가응력이 집중되었다. 6. 하악 중절치의 일점에 수직 하중을 가한 경우가 다른 하중 조건에 비하여 지지점과의 거리차이로 인하여 하악골에 가장 높은 등가 응력을 유발하였다. 7. 의치상 재료에 따른 하악 골에 발생되는 응력의 크기 및 분산에는 큰 차이가 없으나 금속상의 경우가 교합압을 분산하는데는 효과적이었다.h clinical experiment patients. 본 연구 결과로 낙지의 PCA검색으로써 항체주사 부위에 Evan's Blue 착색으로 인하여 vascular permation이 일어나 allergynicity 반응이 인정되므로 낙지는 allergy가 있다고 할 수 있다. 조기, 홍어, 새우도 역시 allergenicity성이 나타난 것을 볼 수 있었다. 또한 공정 중 microwave와 autoclaving은 4가지 수산식품 낙지, 조기, 홍어, 새우의 allergenicity를 현저히 감소시키는 것으로 나타났다. 반면에 자외선은 단백질로 구성된 allergen의 구조는 크게 변화시키지 못하는 것으로 보여진 것을 알 수 있다. 그러므로 생선의 가공방법은 통조림 가공이나 microwave 처리가 allergenicity성을 감소시킬 수 있는 것으로 보여진다. 낙지, 조기, 홍어, 새우의 한외여과 fraction중 고분자인 100,000이상에서만 allergenicity가 나타났다. 따라서 이 allergen들의 분자량은 100,000 이상으로 추정되며

  • PDF

환경영향평가에서 부유사 농도 추정 방법 제안 (Proposal for Estimation Method of the Suspended Solid Concentration in EIA)

  • 추태호;김영환;박봉수;권재욱;조현민
    • 한국습지학회지
    • /
    • 제19권1호
    • /
    • pp.30-36
    • /
    • 2017
  • 평상시 및 홍수시 하천에 유출되는 토사로 인한 SS(Suspended Solid)농도는 실측을 원칙으로 하여야 하나, 환경영향평가, 하천기본계획 등에서와 같이 각종 개발사업에 따른 SS농도의 변화를 제시하기 위해서는 실측이 아닌 추정이 필요하지만 추정 방법이 규정된 바 없는 실정이다. 따라서, 본 연구에서 RUSLE법에 의한 토사유출량과 특정 빈도 홍수량 산정결과를 이용하여 하천내의 SS농도를 추정하는 수문학적 방법에 대한 제안을 하고자 한다. SS는 실트 점토질 토사 및 콜로이드 입자 등이 해당된다. 그러나, 본 연구에서는 토사유출량 중에서 일반적으로 부유토사에 해당하지 않는 모래를 제외하고, 실트 또는 점토질의 토사에 한해 부유사 기준으로 설정하였다. 농도 추정을 위한 유량은 평상시 유량은 1~2년, 홍수시 유량은 30~100년을 기준으로 하였다. 한편, 확률강우량 분석 소프트웨어는 Fard2006을 사용하였는 바, 2년빈도 미만에 대해서는 강우데이터와 Gumbel분포형 빈도계수를 이용하여 산정하였다. 위와 같은 방법에 의해 실트 및 점토의 토사유출량과 홍수량에 의한 유출용적을 이용하여 SS농도를 추정한 결과, 개발전 자연상태 및 개발중 나대지 상태에서의 SS농도는 유의한 수준을 보이는 것으로 판단된다. 특히, 유로경사에 따라 토사유출량의 차이가 큰 점에 착안하여 SS농도를 유로경사로 나눈 값은 지형인자가 다르더라도 비교적 일정한 범위로 나타남을 확인할 수 있었다. 따라서, 향후 보다 많은 유역에 대하여 연구가 진행된다면 SS농도 추정방법에 대한 지침으로 발전시킬 수 있을 것으로 판단된다.

Stellite bearings for liquid Zn-/Al-Systems with advanced chemical and physical properties by Mechanical Alloying and Standard-PM-Route

  • Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
    • /
    • pp.9-10
    • /
    • 2000
  • An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

  • PDF

페로니켈슬래그와 제강급랭슬래그의 인 흡착특성 (Phosphorus Adsorption Characteristic of Ferronickel and Rapid Cooling Slags)

  • 박종환;서동철;김성헌;박민규;강병화;이상원;이성태;최익원;조주식;허종수
    • 한국환경농학회지
    • /
    • 제33권3호
    • /
    • pp.169-177
    • /
    • 2014
  • 본 연구는 철강산업에서 배출되는 산업폐기물의 일종인 페로니켈슬래그와 제강급랭슬래그의 인공습지나 여과시스템에서 인을 효과적으로 흡착 처리하기 위해 페로니켈슬래그와 제강급랭슬래그를 입경별(유효입경: 0.5 mm, 2.5 mm)로 구분하여 Freundlich 및 Langmuir 등온흡착실험을 통해 인에 대한 흡착특성을 조사하였다. Freundlich 등온흡착식에 의한 페로니켈슬래그(FNS)와 제강급랭슬래그(RCS)의 인 흡착능(K)은 RCS 0.5(0.5105) > RCS 2.5(0.3571) > FNS 2.5(0.0545) ${\fallingdotseq}$ FNS 0.5(0.0400) 순이었으며, 본 실험에 사용된 모든 슬래그의 흡착강도(1/n) 값이 0.19954-0.3657범위로 1보다 작으므로 모두 L형의 등온흡착식으로 판단 할 수 있었다. Langmuir 등온흡착식에 의한 인의 최대흡착능(a)은 FNS 0.5, FNS 2.5, RCS 0.5, RCS 2.5가 각각 320, 187, 3,582 및 2,983 mg/kg이었다. 슬래그의 실제 흡착량과 Freundlich와 Langmuir 등온흡착 일반식을 적용한 결과 실제 인의 흡착량은 전반적으로 Langmuir 등온흡착식이 Freundlich 등온흡착식에 비해서 잘 일치하였다. 이상의 결과를 미루어 볼 때, Freundlich와 Langmuir 등온흡착식을 이용한 슬래그의 인 흡착능력은 제강급랭슬래그(RCS)가 페로니켈슬래그(FNS)보다 높았으며, 고로급랭슬래그는 인공습지나 여과시스템에서 인 흡착을 위한 여재로 적용이 가능할 것으로 판단된다.