• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.6
• /
• pp.620-625
• /
• 2015

In an effort to reduce the onset of global warming, the International Maritime Organization Marine Environment Protection Committee (IMO MEPC) proposed the reduction in ship speeds as a way of lowering the proportion of carbon dioxide ($CO_2$) in the Green House Gas emissions from ships. To minimize fuel costs, shipping companies have already been performing slow steaming for their own fleets. Specifically, the slow steaming approach has been adopted for most ocean-going container lines. In addition, because of the increased marine fuel cost that is required to enable increased capacity, there is an urgent need for more advanced fuel-saving technologies. Therefore, in this present study, we propose a fuel-cost reduction method that can improve the performance of diesel engines. We introduce a predetermined amount (0.025% of the amount of fuel used) of fuel additive (oil-soluble calcium-based organometallic compound). For improved experimental accuracy, as the test subjects, we utilize a large two-stroke diesel engine installed in land plants. The loads of the test engine were classified as low, medium, and high (50, 75, and 100%, respectively). We compare the engine performance parameters (power output, fuel consumption rate, p-max, and exhaust temperature) before and after the addition of fuel additives. Our experimental results, confirmed that we can realize fuel-cost savings of at least 2% by adding the fuel additive in low load conditions (50%). Likewise, the maximum combustion pressure was found to have increased. On the other hand, we observed that there was a reduction in the exhaust temperature.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.505-510
• /
• 2015

This study was performed to test the combustive properties of pinus rigida specimens treated with methylpiperazinomethyl-bis-phosphonic acid $M^{n+}$ ($PIPEABPM^{n+}$)s and methylpiperazinomethyl-bis-phosphonic acid (PIPEABP). Each pinus rigida plates were painted three times with 15 wt% $PIPEABPM^{n+}s$ or PIPEABP solutions at the room temperature. After drying specimens treated with chemicals, combustive properties were examined by the cone calorimeter (ISO 5660-1). It was indicated that the speed to peak mass loss rate ($MLR_{peak}$), (0.104~0.121) g/s for specimens treated with $PIPEABPM^{n+}s$ was lower than that of PIPEABP plate. In addition, the total smoke release rate (TSRR), $(224.4{\sim}484.0)m^2/m^2$ for $PIPEABPM^{n+}s$ treated specimens except specimen treated with PIPEABPAl3+ and $CO_{mean}$ production (0.0537~0.0628) kg/kg was smaller than that of PIPEABP plate. In particular, for the specimens treated with $PIPEABPM^{n+}$ by reducing the smoke production rate, the second-smoke production rate (2nd-SPR) $(0.0117{\sim}0.0146)m^2/s$ was lower than that of PIPEABP plate. It can thus be concluded that combustion-retardation properties of the treated $PIPEABPM^{n+}s$ were partially improved compared to those of the virgin plate.

• Fire Science and Engineering
• /
• v.28 no.4
• /
• pp.57-63
• /
• 2014

This study was performed to test the combustive properties of Medium Density Fibreboard (MDF) specimens treated with piperazinomethyl-bis-phosphonic acid (PIPEABP), methylpiperazinomethyl-bis-phosphonic acid (MPIPEABP), and N,N-dimethylethylenediaminomethyl-bis-phosphonic acid (MDEDAP). MDF Plates were painted in three times with 15 wt% solution of the alkylenediaminoalkyl-bis-phosphonic acids at the room temperature, respectively. After drying specimen treated with chemicals, combustive properties were examined by the cone calorimeter (ISO 5660-1). It was indicated that the specimens treated with chemicals showed the later time to peak mass loss rate ($TMLR_{peak}$) = (340475) s than that of virgin plate by reducing the burning rate. In adition, the specimens treated with chemicals showed the higher $CO_{mean}$ production (0.0883~0.0963) kg/kg than that of virgin plate. Especially, the specimens treated with chemicals showed the higher mean smoke extinction area ($SEA_{mean}$) ($5m^2/kg{\sim}21.5m^2/kg$) than that of virgin plate. Thus, It is supposed that the combustion-retardation properties were improved by the partial due to the treated alkylenediaminoalkyl-bis-phosphonic acids in the virgin MDF Plate. However, It gave a negative effect on smoke reduction.

• Fire Science and Engineering
• /
• v.27 no.6
• /
• pp.57-63
• /
• 2013

This study was performed to test the combustive properties of Pinus rigida specimens treated with piperazinomethyl-bis-phosphonic acid (PIPEABP), methylpiperazinomethyl-bis-phosphonic acid (MPIPEABP), and N,N-dimethylethylene-diaminomethyl-bis-phosphonic acid (MDEDAP). Pinus rigida Plates were painted in three times with 15 wt% alkylenedi-aminoalkyl-bis-phosphonic acid solutions at the room temperature. After drying specimen treated with chemicals, combustive properties were examined by the cone calorimeter (ISO 5660-1). It was indicated that the specimens treated with chemicals showed the later time to peak mass loss rate ($TMLR_{peak}$) = (315~420) s than that of virgin plate by reduc-ing the burning rate except for $TPMR_{peak}$ (280 s) treated with DMDAP. In adition, the specimens treated with chemicals showed both the higher total smoke release rate (TSRR) (407.3~902.0) $m^2/m^2$ and $CO_{mean}$ production (407.3~902.0) $m^2/m^2$ than those of virgin plate. Especially, for the specimens treated with PIPEABP, 1st-smoke production rate (1st-SPR) (0.1250~0.1297) g/s was lower than that of virgin plate, while the 2nd-SPR (0.183 g/s) was higher. Thus, It is supposed that the combustion-retardation properties were improved by the partial due to the treated alkylenediaminoalkyl-bis-phos-phonic acids in the virgin Pinus rigida.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.192-192
• /
• 2011

교토의정서에서 지구온난화의 원인이 되는 온실가스로 $CO_2$, $CH_4$, $N_2O$, HFCs, PFCs, $SF_6$를 규제하고 있다. 규제하는 6대 온실가스 가운데 $CO_2$가 가장 대표적이며, 우리나라의 연료연소에 의한 $CO_2$ 배출량은 세계 10위로 기후변화 진행속도는 세계 평균속도보다 빠르게 진행되고 있다. 이러한 기후변화에 대응하기 위하여는 온실가스 배출로 인한 DB구축 연구가 선행되어야 하며, 산림부분에 있어서는 연료의 열적특성 구명 연구가 극도로 미진한 국내현실에서 기초 data 확보를 위한 연구가 시급한 실정이다. 따라서, 본 연구에서는 산불발생 시 온실가스 배출량의 DB를 구축하기 위하여 산불발생 시 배출되는 탄소배출량을 예측하고자 산림 가연물의 연소실험을 수행 하였다. 연소실험은 산림 연료 가운데 지표연료 10가지(소나무낙엽, 굴참나무낙엽, 소나무솔방울, 밤나무밤송이껍질, 방아풀, 주름조개풀, 칡, 엉겅퀴, 김의털, 고비)를 대상으로 콘칼로리미터 장비를 이용하여 이산화탄소와 일산화탄소 배출량을 분석하였다. 탄소배출량 실험에 앞서 지표연료들의 함수율을 측정한 결과, 10가지 지표연료 가운데 고사한 연료(낙엽, 솔방울, 밤송이)는 9~24% 정도, 생연료인 초본류 6가지는 181~484% 정도인 것으로 나타났으며, 솔방울과 밤송이의 경우 9~10%로 가장 수분을 적게 함유하고 있음을 알 수 있었다. 탄소배출량 분석 결과, 50g 중량에 대한 10가지 지표연료들의 이산화탄소 총배출량은 28~98g 정도, 일산화탄소 총배출량은 0.76~4.08g 정도 배출하는 것으로 나타나 연료별 차이를 보였으며, 특히, 고사한 연료와 생연료의 탄소배출량 차이는 큰 것으로 나타났다. 일산화탄소 총배출량은 고사한 연료(소나무낙엽, 굴참나무 낙엽, 소나무 솔방울, 밤나무 밤송이)는 3.24~4.08g 정도, 생연료 초본류 6가지(방아풀, 주름조개풀, 칡, 엉겅퀴, 김의털, 고비)는 0.76~2.73g 정도 배출하는 것으로 나타났다. 이산화탄소 총배출량은 함수율이 현저히 낮은 4가지 연료(소나무 낙엽, 굴참나무 낙엽, 소나무 솔방울, 밤나무 밤송이 껍질)들은 52~98g 정도, 함수율이 높은 6가지 초본류는 28~48g 정도의 이산화탄소를 배출하는 것으로 나타났다. 따라서, 고사한 연료인 소나무 낙엽, 굴참나무 낙엽, 소나무 솔방울, 밤나무 밤송이는 초본류 보다 상대적으로 이산화탄소와 일산화탄소 배출량이 많은 것으로 나타났으며, 특히, 소나무 솔방울은 가장 많은 이산화탄소와 일산화탄소를 배출하는 것으로 나타났다. 상대적으로 방아풀과 주름조개풀은 각각 28g과 35g으로 이산화탄소 배출량이 작은 것으로 나타났다. 따라서, 산불발생 시, 소나무의 솔방울은 10가지 지표연료 가운데 상대적으로 많은 이산화탄소와 일산화탄소를 배출할 것으로 사료된다.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.10 no.2
• /
• pp.73-79
• /
• 2012

Purpose: The purpose of this study was to identify the changes in the characteristics of patients with carbon monoxide (CO) poisoning, as well as the distinctive differences in intentionally exposed patients. Methods: The medical records of CO poisoning patients, who visited nine emergency departments between January 2010 and December 2011, were reviewed retrospectively. The clinical information including age, gender, hospitalization, type of discharge, cause and location of exposure, site of onset, concentration of initial blood carboxyhemoglobin (COHb), methods of treatment and presence of neurological complications was examined. The subjects were divided into an intentional and non-intentional group and the differences between them was compared. Results: A total 209 subjects were recruited. The median age was 38 years (29~49.5 years). They frequently complained of nausea and vomiting, and the most common exposures occurred in winter, normally in the home. The cause of exposure was usually fire, followed by incomplete combustion of fuels. The median initial blood COHb was 13.15%. The proportion of intentionally exposed patients was 21%. They were significantly younger, more frequently discharged against medical advice, and showed a higher initial blood COHb level (22.85%) than the non-intentional group. Conclusion: This study suggests that those with intentional CO poisoning are normally discharged against medical advice even when they have a higher initial COHb level. An adequate explanation of the delayed neurologic sequelae and short term follow-up observation is recommended for those patients with intentional exposure.

• Clean Technology
• /
• v.20 no.3
• /
• pp.212-217
• /
• 2014

In order to regenerate the sulfidated desulfurization sorbent, oxygen is used as the oxidant agent on the regeneration process. The small amount of oxygen un-reacted in regeneration process is flowed into direct sulfur recovery process. However, the reactivity for $SO_2$ reduction can be deteriorated with the un-reacted oxygen by various reasons. In this study, the deactivation effects of un-reacted oxygen contained in the off-gas of regeneration process flowed into direct sulfur recovery process of hot gas desulfurization system were investigated. Sn-Zr based catalysts were used as the catalyst for $SO_2$ reduction. The contents of $SO_2$ and $O_2$ contained in the regenerator off-gas used as the reactants were fixed to 5.0 vol% and 4.0 vol%, respectively. The catalytic activity tests with a Sn-Zr based catalyst were for $SO_2$ reduction performed at $300-450^{\circ}C$ and 1-20 atm. The un-reacted oxygen oxidized the elemental sulfur produced by $SO_2$ catalytic reduction and the conversion of $SO_2$ was reduced due to the production of $SO_2$. However, the temperature for the oxidation of elemental sulfur increased with increasing pressure in the catalytic reactor. Therefore, it was concluded that the decrease of reactivity at high pressure is occurred by catalytic deactivation, which is the re-oxidation of lattice oxygen vacancy in Sn-Zr based catalyst with the un-reacted oxygen on the catalysis by redox mechanism. Meanwhile the un-reacted oxygen oxidized CO supplied as the reducing agent and the temperature in the catalyst packed bed also increased due to the combustion of CO. It was concluded that the rapidly increasing temperature in the packed bed can induce the catalytic deactivation such as the sintering of active components.

• Korean Journal of Optics and Photonics
• /
• v.28 no.4
• /
• pp.166-171
• /
• 2017

Hydrogen gas is a green energy sources because it features no emission of pollutants during combustion. But hydrogen gas is very dangerous, being flammable and very explosive. Hydrogen gas detection is very important for the safety of a nuclear power plant. Hydrogen gas is generated by oxidation of nuclear fuel cladding during a critical accident, and leads to serious secondary damage in the containment building. This paper discusses the development of a Raman lidar system for remote detection and measurement of hydrogen gas. A small, portable Raman lidar system was designed, and a measurement algorithm was developed to quantitatively measure hydrogen gas concentration. To verify the capability of measuring hydrogen gas with the developed Raman lidar system, experiments were carried out under daytime outdoor conditions by using a gas chamber that can adjust the hydrogen gas density. As results, our Raman lidar system is able to measure a minimum density of 0.67 vol. % hydrogen gas at a distance of 20 m.

• Resources Recycling
• /
• v.29 no.1
• /
• pp.53-61
• /
• 2020

This study aimed to develop a foam concrete material for a ground repair system that has low strength and low fluidity by using an eco-friendly binder, which substitutes industrial by-products for more than 90% of cement. Basic properties were evaluated after substituting a small amount of calcium sulfo aluminate (CSA) for the binder to improve the sinking depth rate and volume change, commonly found when it had a large amount of industrial by-products. The substitution rates of CSA for the eco-friendly binder used for the foam concrete were 2.5, 5, and 10%. Fresh properties, hardened properties, pore structure, and hydrates were analyzed. Experimental results showed that using only 2.5% of CSA could improve the deep sinking depth which occurred when using an eco-friendly binder. As a result, the weight difference between the upper, middle, and lower parts of cast specimens was improved even after being hardened. The addition of CSA also contributed to the formation of small, uniformly sized closed pores and improved initial strength. However, when the proportion of CSA increased, the long-term strength decreased. However, it satisfied the target strength when 5% or less of CSA was used. The results of this study revealed that it was possible to manufacture foam concrete with low strength and high fluidity for repairing ground satisfying target qualities by adding 2.5% of CSA to the eco-friendly binder containing a large amount of industrial by-products.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.4
• /
• pp.15-22
• /
• 2020

The landfill gas produced in landfill is generally made up of methane(CH4) and carbon dioxide(CO2) of more than 90%, with the remainder made up of hydrogen sulfide(H2S). However, separate pre-treatment facilities are essential as hydrogen sulfide contained in landfill gas is combined with oxygen during the combustion process to generate sulfur oxides and acid rain combined with moisture in the atmosphere. Various desulfurization technologies have been used in Korea to desulfurize landfill gas. Although general desulfurization processes apply various physical and chemical methods, such as treatment of sediment generation according to the CaCO3 generation reaction and treatment through adsorbent, there is a problem of secondary wastes such as wastewater. As a way to solve this problem, a biological treatment process is used to generate and treat it with sludge-type sulfide (S°) using a biological treatment process.In this study, as a basic study of technology for utilizing the biological treatment by-products of hydrogen sulfide in landfill gas, an experiment was conducted to use the by-product as a mixture of concrete. According to the analysis of the mixture concrete strength of sulfur products, the mixture of sulfur by-products affects the strength of concrete and shows the highest strength value when mixing 10%.