• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2013년도 자성 및 자성재료 국제학술대회
• /
• pp.32-32
• /
• 2013

Using the Vienna ab initio simulation package (VASP) incorporating van der Waals interaction, we have explored structural, adsorption, and magnetic properties of Ni(111)/BN/Co(111) systems. We have found that both Ni(111) and Co(111) layers shows half metallic state, while the spacer BN layer becomes weak metal for one monolayer (ML) thickness and an insulating barrier for two ML thickness. The half metallic states in both Ni(111) and Co(111) layers are robust because it is unchanged independently on the magnetic coupling of Ni(111) and Co(111). This finding suggests that the Ni(111)/BN/Co(111) systems can be utilized for perfect tunneling magnetoresistance system. Moreover, it can be applied for potential spin injecting into semiconductor in FM/semiconductor system due to the fact that the half metallic state in FM layers at the interface will be unchanged.

• 한국전기전자재료학회논문지
• /
• 제13권5호
• /
• pp.444-450
• /
• 2000

We prepared Co-Cr thin film for perpendicular magnetic recording media with facing targets sputtering system(FTS system) which can deposit a high quality thin film in plasma-free state and wide range of working pressure. The effect of sputtering conditions(argon gas pressure and substrate temperature) on the magnetic and the crystallographic characteristic of Co-Cr thin film was investigated. And the variation of perpendicular coercivity with the variation of film thickness was studied. As a result we obtained the high perpendicular coercivity of 1900Oe and the good dispersion angle of c-axis($\Delta$$\theta$$_{50}$) of 5$^{\circ}$on the film thickness of 100nm for the promising recording layer of perpendicular magnetic recording media.c recording media.a.

• 대한금속재료학회지
• /
• 제49권3호
• /
• pp.256-263
• /
• 2011

We have synthesized Al-Co/AlN-Co multilayer films with different layer thicknesses by using a Two-Facing Target Type dc Sputtering (TFTS) system. The deposited films were annealed isothermally at different temperatures and their microstructure, magnetic properties and resistivity were investigated. The magnetization of the as-deposited films was found to be very small, irrespective of layer thickness. It was found that the annealing conditions and layer thickness ratio of Al-Co to AlN-Co (LTR) were able to control the microstructure, as well as the physical properties of the prepared films. The resistivity and magnetization increased and the coercivity decreased with a decreasing LTR. A high resistivity of 2500 ${\mu}{\Omega}-cm$, a magnetization of 360 $emu/cm^3$, and a coercivity of 5 Oe were obtained for the films with LTR=0.175.

• Journal of Welding and Joining
• /
• 제14권1호
• /
• pp.82-91
• /
• 1996

The maximum butt-joint gap size in $CO_2$ laser beam welding of SAPH steel plates with different thicknesses and its bending formability were studied. In the range of the gap size$\geq$0.1mm, the optimal butt welding speed was faster than that of no gap (air gap) condition. This behaviour was independent on the difference of thickness at any combination. Also, the allowable gap size in steel plates with different thicknesses was larger than with same thicknesses. In the range of $T/T_0$(bead shape) $\geq$ 0.8, good bending formability was obtained at any combination of thickness. The formability was improved by reducing the hardness in weld bead using pre-heating process. Finally, FEM result of the laser beam welded underframe with different thicknesses was compared to that of the conventional spot welded underframe.

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.417-421
• /
• 2013

The dominant magnetization reversal behavior of electrodeposited CoPt samples with various thicknesses deposited at different current densities was the domain wall motion by means of wall pinning. The magnetic interaction mechanism was dipolar interaction for all samples. The dipolar interaction strength was significantly affected by the sample thickness rather than by the current density, while the magnetic properties were closely related to the current density.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 초전도 자성체 연구회
• /
• pp.13-16
• /
• 2003

Magnetic and magneto-optical properties of Fe/Pt/Fe, Co/Pd/Co trilayers and also the sandwiches with wedge-shaped magnetic (Fe, Co) and nonmagnetic (Pt, Pd) layers were investigated. The oscillatory behavior of the saturation field $H_{s}$ of the studied trilayers with changing the thickness of the nonmagnetic layer (NML) $t_{NML}$ was revealed. That was explained by the exchange coupling between ferromagnetic layers (FML) through the nonmagnetic spacer. For the first time, oscillations of the transverse Kerr effect (TKE) with changing the Pt- and Pd-wedge thickness were discovered. Period of these oscillations was found to depend on the FML thickness and the photon energy of the incident light. TKE spectra of the examined samples were discovered to modify very strongly with increasing $t_{NML}$. The discovered peculiarities of magneto-optical properties of thin-film systems were explained by a concept of the spin-polarized quantum well states in the pt and Pd layers.

• Journal of Magnetics
• /
• 제10권1호
• /
• pp.33-35
• /
• 2005

Perpendicular magnetization curves and crystal textures of $[Pd(0.8 nm)/Co(0.8 nm)]_5/FeMn$ multilayers having an exchange-biased perpendicular magnetic anisotropy as a function of FeMn thickness and annealing temperature were measured. As FeMn thickness increases from 0 to 21 nm, the perpendicular exchange biasing field ($H_{ex}$) obtained the maximum value of 130 Oe at FeMn thickness 12 nm. As the annealing temperature increases to $240^{\circ}C$, the H_ex increased from 115 Oe to 190 Oe and the exchange-biased perpendicular magnetic anisotropy disappeared at $330^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• 제12권5호
• /
• pp.540-544
• /
• 1991

Thin film being formed on the surface of cobalt in the early stage of electrochemically induced passivation was studied by the three-parameter ellipsometry. The growth of the passive film was complete in a few seconds from the onset of the passivating potential, and was followed by a slight decrease in the thickness in 4-40 seconds. The optical constants of the passive film changed gradually during the changes in the thickness. The thickness and the optical properties at the steady state of passivation depended on the potential of the electrode. From the coulometric data and the optical properties, the composition of the passive films was deduced to be close to those of CoO, ${Co_3}{O_4}$ and ${Co_2}{O_3}$ depending on the potential. Cathodic reduction in the presence of EDTA was found to be an efficient way to obtain film-free reference surface of cobalt.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.205-214
• /
• 2022

Research on reducing the thickness of polyethylene terephthalate (PET) bottles is necessary to reduce the amount of plastic used. However, as decreasing a PET bottle's thickness weakens it, a robust bottle design is required. Therefore, in this study, we numerically analyzed various bottom designs of a carbonated soft drink PET bottle with 245 and 500 ml capacities and complicated petaloid shapes. Deformation, equivalent stress, maximum principal stress, and its direction according to each design were analyzed to study the strength of the bottle. The results serve as a reference to design robust petaloid PET bottle bottoms with a reduced thickness for carbonated soft drinks.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.71-76
• /
• 2022

We evaluated and developed a 6th generation large-size polisher in the type of face-up and Oscar. We removed the hillocks of the low temperature poly-silicon (LTPS) thin film with this polisher. The surface roughness of LTPS was lowered from 7.9 nm to 0.6 nm after CMP(chemical mechanical polishing). The thickness of the LTPS is measured through reflectance in real time during polishing, and the polishing process is completed according to this thickness. The within glass non-uniformity (WIGNU) was 6.2% and the glass-to-glass non-uniformity (GTGNU) was 2.5%, targeting the LTPS thickness of 400Å. In addition, the residual slurry after the CMP process was removed through the Core Flow PVA Brush and alkaline chemical.