• 한국의학물리학회지:의학물리
• /
• 제11권2호
• /
• pp.131-139
• /
• 2000

국내도입 원격제어 근접조사장치인 Ralstron(Shimatsu, Japan) 의 코발트-60선원을 이리디움 192 선원으로 대체하고자 선원을 설계하고, 선원주위의 선량분포를 유도하였다. 이리디움 선원의 물리적크기는 직경1.5mm, 높이 1.5mm 로 370MBq(loci)를 목표로 설계하였으며, 외경은 3mm 이고, 크기는 13m이며, 캡슐의 재질은 SUS316L 이다. 선원 선원자체흡수와 스테인리스 스틸 캡슐에 의한 선량감쇠는 61.2%로 나타났으며, 단위방사능당 감마상수는 4.69R$cm^2$/mCi-hr였다. 조직선량은 공기중흡수선량 변환과 조직산란보정을 통해 구하였으며, 조직흡수선량변환계수는 이리디움의 에너지스펙트럼을 이용하여 공기에 대한 조직의 질량에너지흡수계수비 ($\mu$$_{en}$ )$^{tissue}$ air= 1.112 를 얻었다. 고안 선원에 대한 선량분포는 선원을 2,338개의 선원으로 분할하고, 각 분할선원에서 주위에 도달되는 선량을 이산적으로 누적 평가하여 임상에서 사용할 수 있도록 선량도표를 제공하였다.

• 한국분말재료학회지
• /
• 제27권2호
• /
• pp.146-153
• /
• 2020

The co-doping effect of aliovalent metal ions such as Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, and Zn²⁺ on the photoluminescence of the Y₂O₃:Eu³⁺ red phosphor, prepared by spray pyrolysis, is analyzed. Mg²⁺ metal doping is found to be helpful for enhancing the luminescence of Y₂O₃:Eu³⁺. When comparing the luminescence intensity at the optimum doping level of each Mg²⁺ ion, the emission enhancement shows the order of Zn²⁺ ≈ Ba²⁺ > Ca²⁺ > Sr³⁺ > Mg²⁺. The highest emission occurs when doping approximately 1.3% Zn²⁺, which is approximately 127% of the luminescence intensity of pure Y₂O₃:Eu³⁺. The highest emission was about 127% of the luminescence intensity of pure Y₂O₃:Eu³⁺ when doping about 1.3% Zn²⁺. It is determined that the reason (Y, M)₂O₃:Eu³⁺ has improved luminescence compared to that of Y₂O₃:Eu³⁺ is because the crystallinity of the matrix is improved and the non-luminous defects are reduced, even though local lattice strain is formed by the doping of aliovalent metal. Further improvement of the luminescence is achieved while reducing the particle size by using Li₂CO₃ as a flux with organic additives.

• 한국수산과학회지
• /
• 제17권6호
• /
• pp.492-498
• /
• 1984

We have reported the seasonal and portional variation in the composition of uronic acid of alginic acid from Ecklonia cava in the previous study. In the present paper, uronic acid block structure of alginic acid from Ecklonia cave was investigated, and some related properties such as viscosity, the dependence on temperature and substitution of metallic ion were also discussed. The proportion M block was highest amnog three blocks in both of frond and stipe. The average values of M and G block ratios were $51.6|%\;and\;32.3\%$ in the frond, whereas $45.7\%\;and\;38.6\%$ in the stipe, respectively. The proportions of alternating blocks in the frond and stipe were similar, and the values were $16.1\%$ in the frond and $15.6\%$ in the stipe. The viscosity of $1\%$ sodium alginate solution was almost inversely proportional to the M/G and/or M block ratio. Viscosities were marked maximum from summer to autumn and minimum winter to spring. In the value of lower M/G and M block ratio, the viscosity seemed to have a considerable dependence on temperature. The temperature dependence was more appearant in the alginic acid from the frond (M/G ratio, 0.95; M block, $54.2\%$) collected in July and the stipe (M/G ratio, 1.61; M block $47.6\%$) in April. The affinity with metallic ion appeared higher in order of $Pb^{2+}>Cu^{2+}>Co^{2+}>Zn^{2+}$. The amounts of metallic ion exchange of the $Pb^{2+},\;Cu^{2+},\;Co^{2+}\;and\;Zn^{2+}$ were ranged from 3.4. to 4.7, 2.5 to 3.2, 1.8 to 2.2 and 1.6 to 1.7 meq/(g. sodium alginate), respectively.

• Journal of Pharmaceutical Investigation
• /
• 제25권2호
• /
• pp.109-116
• /
• 1995

For the administration of narcotic antagonist with short half-life and low patient compliance, the sustained release system using biodegradable matrix is effective. Polyphosphazenes are of considerable interest as biodegradable matrix systems for controlled release of drugs. In this study, biodegradable polyphosphazenes available for the sustained release implantable device were synthesized, and their application was examined. Poly[dichlorophosphazene] was synthesized by solution polymerization method and confirmed with IR spectrum. Poly[bis(ethyl glycinate) phosphazene] and poly[ (diethyl glutamate)-co-(ethyl glycinate)phosphazene] were then produced by substitution of amino acid alkyl esters for chloride side groups. Using these polymers, the implantable devices of 1 mm thickness and $10{\times}10\;mm$ size containing naloxone hydrochloride were prepared and their release and degradation profiles were measured. In the case of poly[bis(ethyl glycinate)phosphazene] with swelling characteristics, degradation rate was slower than the release rate, showing that the release rate is partly dependent on the swelling rate. In contrast, the degradation rate of polyl[(diethyl glutamate)-co-(ethyl glycinate)phosphazene] matrix was identical with release rate of naloxone hydrochloride. On the basis of these results, it is expected that these polymers can be applied to sustained release implantable systems delivering narcotic antagonist.

• 자원환경지질
• /
• 제30권1호
• /
• pp.1-14
• /
• 1997

The shales from the Euiseong area are interbedded along the bedding in Cretaceous Gyeongsang Supergroup, which are composed mainly of quartz, plagioclase, K-feldspar and associated with trace amount of biotite, muscovite, chlorite, pyrite, hematite, carbonate and clay minerals. The ratio of $Al_2O_3/Na_2O$ and $K_2O/Na_2O$ in shales from the Shindong Group are ranged from 9.16 to 24.32 and from 1.70 to 5.97, and the Hayang Group ranged from 2.76 to 8.89 and from 0.42 to 2.74, which are negative correlated between $K_2O/Na_2O$ and $Al_2O_3/Na_2O$ against $SiO_2/Al_2O_3$ respectively. Those are suggested that controlled of mineral compositions in shales due to substitution and migration of elements by sedimentation and diagenesis. These shale formation were deposited in basin of terrestrial environments originated from the igneous rocks, and the REE of these rocks are not influenced with diagenesis and hydrothermal alterations on the basis of $Al_2O_3$ versus La, La against Ce, Zr versus Yb, the ratios of La/Ce (0.43 to 0.62) and Th/U (1.11 to 10.71). The narrow range in trace and REE element characteristics as Co/Th (0.63 to 1.92), La/Sc (1.98 to 5.90), Sc/Th (0.58 to 1.30), V/Ni (0.90 to 3.25), Cr/V (0.45 to 1.78), Ni/Co (1.88 to 6.67) and Zr/Hf (30.04~60.87) of these shales argues for inefficient mixing of the simple source lithologies during sedimentation. These rocks also show much variation in $La_N/Yb_N$ (6.90 to 17.02), Th/Yb (4.17 to 13.68) and La/Th (1.98 to 5.90), and their origin is explained by derivation from a mixture of intermediate to acidic igneous rocks.

• Molecules and Cells
• /
• 제28권1호
• /
• pp.19-24
• /
• 2009

The goal of this study was to create a novel baculovirus expression system that does not require recombinant virus purification steps. Transfection of insect cells with transfer vectors containing barnase under control of the Cotesia plutellae bracovirus (CpBV) promoters ORF3004 or ORF3005 reduced cell growth. Co-transfection with bApGOZA DNA yielded no recombinant viruses and nonrecombinant backgrounds. To further investigate the detrimental effects of barnase on insect cells, two recombinant bacmids harboring the barnase gene under control of the CpBV promoters, namely bAcFast-3004ProBarnase and bAcFast-3005ProBarnase, were constructed. While no viral replication was observed when only the recombinant bacmids were transfected, recombinant viruses were generated when the bacmids were co-transfected with the transfer vector, pAcUWPolh, through substitution of the barnase gene with the native polyhedrin gene by homologous recombination. Moreover, no non-recombinant backgrounds were detected from unpurified recombinant stocks using PCR analysis. These results indicate that CpBV promoters can be used to improve baculovirus expression vectors by means of lethal gene expression under the control of these promoters.

• 한국식생활문화학회지
• /
• 제18권2호
• /
• pp.181-191
• /
• 2003

This study was carried on the oxidative stability and the real practice possibilities in cooking of fat replacer MCT. Nowadays, it was known that fats and oils had become causes for cardiac disease, obesity and cancer, so the new materials were needed for fat substitute that has less fat contents and low calories. The food industry concerned about fats and oils had been researched and developed new and various kinds of substitute fats. MCT(medium chain triglycerides) is one of the fat based fat substitutes used as fat replacers. The POV of com germ oil(CO), soybean oil(SO), shortening(ST), butter(BT), their blended oil with MCT 10-50%(w/w), and MCT were determined and oxidative stability by POV was compared MCT with those of them. MCT has shown higher oxidative stability than CO, SO, ST, BT, so oxidative stabilities in all kinds of blended oils become higher and higher by the increased substitution ratios. In case of bread, the volume of bread prepared with MCT(MCT bread) substituted for ST at 10-40% level(w/w) were increased a little comparing to that made of shortening(ST bread). But degree of gelatinization of MCT bread were a little lower than ST bread, at the substitute ratio above 40%, the degree of gelatinization were reduced greatly. These phenomena were sustained in 9 stored days. While baking losses of MCT breads were almost same as ST bread until 30% substitute ratio, and the appearances of MCT breads were similar to ST bread until 40% substitute ratio. Also rheological properties and color(Lab) of MCT breads had shown no different significantly from ST bread until 20% substitute ratio, but by the results of sensory evaluation, overall acceptance including appearance, color, flavor, taste, texture of MCT breads were recognized almost same as ST bread by panel until 40% substitute ratio. Depends on the above results, we can suggest that 30-40% of MCT will substitute for shortening in making bread in order to reduce fat and calories intake amounts.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.156-156
• /
• 2016

The effect of nitrogen doping on the mechanical and tribological performance of single-layer tetrahedral amorphous carbon (ta-C:N) coatings of up to $1{\mu}m$ in thickness was investigated using a custom-made filtered cathode vacuum arc (FCVA). The results obtained revealed that the hardness of the coatings decreased from $65{\pm}4.8GPa$ to $25{\pm}2.4GPa$ with increasing nitrogen gas ratio, which indicates that nitrogen doping occurs through substitution in the $sp^2$ phase. Subsequent AES analysis showed that the N/C ratio in the ta-C:N thick-film coatings ranged from 0.03 to 0.29 and increased with the nitrogen flow rate. Variation in the G-peak positions and I(D)/I(G) ratio exhibit a similar trend. It is concluded from these results that micron-thick ta-C:N films have the potential to be used in a wide range of functional coating applications in electronics. To achieve highly conductive and wear-resistant coatings in system components, the friction and wear performances of the coating were investigated. The tribological behavior of the coating was investigated by sliding an SUJ2 ball over the coating in a ball-on-disk tribo-meter. The experimental results revealed that doping using a high nitrogen gas flow rate improved the wear resistance of the coating, while a low flow rate of 0-10 sccm increased the coefficient of friction (CoF) and wear rate through the generation of hematite (${\alpha}-Fe_2O_3$) phases by tribo-chemical reaction. However, the CoF and wear rate dramatically decreased when the nitrogen flow rate was increased to 30-40 sccm, due to the nitrogen inducing phase transformation that produced a graphite-like structure in the coating. The widths of the wear track and wear scar were also observed to decrease with increasing nitrogen flow rate. Moreover, the G-peaks of the wear scar around the SUJ2 ball on the worn surface increased with increasing nitrogen doping.

• 한국결정성장학회지
• /
• 제20권5호
• /
• pp.243-248
• /
• 2010

Si-BCP(si-substituted biphasic calcium phosphate)를 제조하기 위하여 $Ca(NO_3)_2{\cdot}4H_2O$, $(NH_4)_2HPO_4$, $Si(OC_2H_5)_4$을 출발 물질로 공침법(co-precipitation process)을 이용하여 합성하였다. 합성된 분말의 HAp/${\beta}$-TCP 결정상 비율 및 Si-P 치환 거동은 X-선 회절 상 분석을 이용하여 측정하였고, silicon ion 첨가 시 나타나는 BCP의 화학적 결합거동을 측정하기 위하여 FT-IR를 사용하여 분석하였다. 또한 Si-BCP 분말의 in-vitro 생분해거동 및 생체활성도를 측정하기 위하여 제조된 분말을 SBF(simulated body fluid) solution에 침적시킨 뒤 분말의 형상과 구성 성분은 SEM과 EDS를 통하여 확인하였다.

• 자원리싸이클링
• /
• 제19권1호
• /
• pp.13-20
• /
• 2010

콘크리트 제조시 많은 에너지가 소모되며 특히 결합재인 시멘트는 제조과정에서 다량의 $CO_2$를 배출하기 때문에 이러한 부정적인 인식을 해소하기 위한 노력이 진행되고 있으며, 최근 들어 환경 친화적인 에코 콘크리트의 제조 및 적용에 대한 관심이 높아가고 있다. 에코 콘크리트는 환경부하의 저감, 산업폐기물의 활용 및 환경관련 성능의 향상 등 다양한 접근 방법이 있으며 이러한 방법들이 국내에 정착하기 위해서는 지속가능한 개발로 친환경 성능이 개선된 콘크리트의 제조에 관한 연구가 필요한 실정이다. 본 연구에서는 콘크리트용 시멘트 및 골재를 천연재료인 메타카올린 및 산업부산물인 동슬래그로 대체 활용한 환경 부하 저감 목적의 에코형 혼합콘크리트를 제작한 후 각 종 시험결과를 통하여 그 활용 가능성을 고찰하였다.