• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2571-2576
• /
• 2011

Surface film formation on $Li(Ni_{1/3}Co_{1/3}Mn_{1/3})O_2$ cathodes upon oxidation of electrolyte during electrochemical cycling was investigated. Information on the important factors for film formation on the cathode can facilitate the design of additives that improve the properties of the cathode. Pyrazole is added to the electrolyte because it is readily oxidized to form a surface film on the cathode. The results of differential scanning calorimetry and Fourier transform infrared spectroscopy (FTIR) showed that the active material played a dominant role in the interfacial film formation with the electrolyte. Carbon black played a negligible role in the surface film formation.

• Tribology and Lubricants
• /
• 제10권4호
• /
• pp.43-50
• /
• 1994

In order to elucidate the effects of co-existing additives (S$_{8}$, TBP: Tri butyl phosphate, ZnDTP: Zinc-dialkyl dithiophosphate) and the role of reacted surface film on the friction behavior of MoDTP (molybdenum dialkyl dithiophosphate), a friction experiment using a dual circular pipe edge surface type friction tester and XPS (X-ray photoelectronic spectrum) surface analysis were conducted. Friction reduction with MoDTP lubricant was proved to be greatly influenced by co-existing additive species. It was dependent on the properties of the film formed through the reaction between the additive and the surface. Phosphate film reduced the friction coefficient of MoDTP through suppression of diffusion of Mo compounds towards the metal substrate. On the other hand, sulfate film, which is inherently rich in lattice defects, did not lead to any appreciable friction reduction with MoDTP since the diffusion of the Mo compound towards the metal substrate was not effectively suppressed. With ZnDTP additive, the sulfide film formed through decomposition greatly influenced the lubricating performance of MoDTP. As such, properties of surface films formed from additives were proved to yield significant influence on the lubrication performance of MoDTP.

• Journal of Information Display
• /
• 제5권2호
• /
• pp.23-26
• /
• 2004

For high end, large area displays, all current LC modes require some degree of optical compensation to improve the front of screen viewing experience. Currently most optical films are laminated to the outside of the LCD cell, between the glass and polariser. In this paper we wish to show how it is possible to integrate the compensating optical film within a VA mode LCD cell. The paper will describe the process of making the biaxial film through the process of in-situ photopolymerisation of an aligned film of reactive mesogens in the cholesteric phase using polarised UV light. The film can be made on the colour filter array side of the LCD panel. In addition the process of fabricating a VA mode LCD containing this film will be described and the performance of this module will be presented.

• Journal of Magnetics
• /
• 제7권3호
• /
• pp.115-125
• /
• 2002

We proposed a novel method to evaluate the magnetic properties of the initial layer and the columnar structure separately for CoCr-based perpendicular recording media. We show that the thickness of the initial layer and the intrinsic magnetocrystalline anisotropy of columnar structure can be quantitatively evaluated using the plotted product of perpendicular anisotropy to magnetic film thickness versus magnetic film thickness ($K_{u{\bot}}^{ex{p.}}$ $\times$ d$_{mag.}$ vs. d$_{mag.}$ plot). Based on the analyses, it is found that: (1) compared with CoCrPtTa media, CoCrPtB media have relatively thin initial layer, and have fine grains with homogeneous columnar structure with c-plane crystallographic orientation; (2) CoCrPtB media can be grown epitaxially on Ru or CoCr/C intermediate layer, and as the result, the magnetic properties of the media within thin thickness region of d$_{mag.}$ $\leq$ 20 nm is significantly improved; (3) the key issue of material investigation for CoCr-based perpendicular recording media will be focused on how to fabricate c-plane-oriented columnar grains well isolated with nonmagnetic substance in epitaxial-growth media, while maintaining the thermal stability of the media.

• 한국자기학회지
• /
• 제19권4호
• /
• pp.147-151
• /
• 2009

전도성 저항특성이 우수한 비정질 CoFeHfO재료의 자화곡선 및 토오크 측정으로부터 포화자화량 및 일축이방성상수를 도출하였으며, 이들 결과를 Landau-Lifshitz-Gilbert(LLG) 이론에 적용하여 마이크로파대역의 복소투자율 특성을 분석하였다. LLG 분석 결과 CoFeHfO 박막 재료의 감쇠상수(damping factor)는 ${\alpha}$ = 0.014로 매우 작은 값을 보였다. 이는 CoFeHfO 재료 내에 존재하는 다양한 자성상(magnetic phase)들 중 감쇠상수가 현저히 작은 자성상들에 의하여 유발되었음을 자기장의 세기에 따른 FMR(ferromagnetic resonance) 신호의 선폭 분석을 통하여 알 수 있었다.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권8호
• /
• pp.813-818
• /
• 1997

In this study the thin film air core and magnetic core inductors consisting of planar coil and/or CoNbZr amorphous magnetic layers on a Si substrate were fabricated as spiral type by using rf magnetron sputtering and wet etching methods. The etchant solution was achieved by iron chloride solution(17.5 mol%) mixed with HF (20 mol%) during 150 sec which etched Cu films and CoNbZr/Cu/CoNbZr multi-layer films. They were about 10${\mu}{\textrm}{m}$ of thickness and 10$\times$10 mm$^2$of size. The properties of thin film magnetic core inductor were 400 nH of Q value at 10 MHz and the resonance frequency was about 300 MHz.

• 한국세라믹학회지
• /
• 제36권5호
• /
• pp.465-470
• /
• 1999

Sensing properties of $\alpha$-Fe2O3 thin film to reducing gases such as CHx and CO were systematically examined after deposition on Al2O3 substrate by PECVD(Plasma Enhanced Chemical Vapor Deposition)technique. Microstructure of deposited $\alpha$-Fe2O3 thin film showed the porous island structure. This specimen was annealed at 450, 550, $650^{\circ}C$ to enhance the gas sensing properties and investigated in terms of CO and C4H10 concentration from 500ppm to 3,000 ppm at operating temperature of 35$0^{\circ}C$ The gas sensitivity(%) to C4H10 measured at the operating temperature of 35$0^{\circ}C$ was 98.24 (highest sensitivity) 69.51 to CO and 2% to CH4 respectviely.

• 한국식품저장유통학회지
• /
• 제20권6호
• /
• pp.766-774
• /
• 2013

'부유' 단감의 상품성 유지를 위한 저장온도(상온과 저온)와 포장재(기능성 필름)효과를 구명하기 위해 본 연구를 수행하였다. 단감의 중량 감소는 포장재에 따른 차이가 커서 기능성 필름 포장처리 한 것이 무포장보다 매우 작았으며, 온도에 따라서는 저온저장이 중량감소 정도를 줄이는 것으로 나타났다. 단감의 경도는 온도의 영향을 받아 저온에서 변화 정도가 적었으며, 저온에서 기능성 필름 포장재를 이용한 처리구에서 가장 적게 변하는 것으로 나타났다. 포장 내 가스조성 변화는 $CO_2$ 농도가 저장온도 및 포장재에 따라 차이를 보여, 저온저장에서 기능성 필름을 이용한 처리구에서 적정 $CO_2$ 농도에 근접하는 것으로 나타났다. 단감의 호흡율($CO_2$ 발생량)은 저장 후 온도에 영향을 받으며, 포장재에 따라 달라졌는데, 저온저장에서 낮아지고 기능성 필름 포장재를 이용한 처리구에서 약간 낮아지는 경향을 보였다. 에틸렌 발생은 온도의 영향이 커서 저온저장에서 감소하였다. Hunter 'b' 값의 황색도는 포장재처리보다는 저장온도에 따른 차이가 큰 것으로 나타났으며, 저온에 저장하는 것이 변색을 지연시켰으나 저장기간이 길어질수록 단감의 변색과 품질저하가 우려되는 것으로 보인다. 따라서 '부유' 단감의 효과적인 상품성 유지를 위하여 저온조건에서 기능성 필름을 이용하는 것이 효과적인 것으로 나타났다.

• 한국자기학회지
• /
• 제21권6호
• /
• pp.214-218
• /
• 2011

본 연구에서는 DC 마그네트론 스퍼터링을 이용해 MgO 단결정 기판 위에 성장된 Ag/CoFeB 박막의 스퍼터링 조건에 따른 박막 미세구조의 변화를 연구하였다. Ag 박막의 결정성 및 표면 거칠기는 인가전력(sputtering power) 및 증착온도의 변화에 따라 증착온도가 증가하는 경우 (200) 방향의 결정성이 향상되는 것을 확인하였으며, 인가전력이 증가되는 경우 표면 거칠기가 감소하는 것을 확인하였다. 또한 고분해능 TEM(transmission electron microscopy) 및 XRR(X-ray reflectivity) 측정을 통해 MgO 기판 위 Ag층의 켜쌓기 성장 및 MgO 기판과 Ag층 사이에 산화층에 해당하는 계면층이 존재하는 것을 알 수 있었으며, 증착온도의 증가에 따른 Ag의 섬상구조 형성 및 intermixing 효과에 의한 Ag/CoFeB 계면층의 변화 및 자기적 특성의 변화를 연구하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.269-274
• /
• 2004

It is important to decide the minimum film thickness and viscosity variations of a multigrade lubricant in the contact surface under the high pressure conditions. By carrying out acceleration, deceleration, and various sliding-rolling ratio movement between two contact bodies, it is experimented that film formation variations in the contact surface are captured with multigrade lubricants in order to exactly investigate the variations of film formations. Optical interference images are continuously captured with high resolution CCD camera during the captured period of acceleration, deceleration. The friction forces between the contacting bodies are also measured simultaneously with the film formation.