• Journal of Environmental Health Sciences
• /
• v.24 no.3
• /
• pp.1-5
• /
• 1998

A spectrophotometric method was developed for the acidic solution stripped after an extraction of 0.5 to 2.5 ppm of Lead(II) from 50 mL of $Na_2S_2O_3$ solution into chloroform as the ion-pairs formed between their thiosulfate complexes and alkylamine, Aliquat336. Pb(II) in the stripped solution forms an complex with DDTC in pH 7.3 buffer solution, and was developed in yellow by copper replacement. The ydlow-colored solution have the maximum absorbance at 435 nm in the measurement of absorbance by UV-Visible spectrophotometer. The interference ions such as Fe(III), Hg (II), Al(III), Co, Cu, Ni, Zn, Ca, Sn, have great effects on the extraction, but they were overcomed by the usage of adequate masking agents before an extraction. At last, a good result was obtained in applying this method to synthetic water.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.418-429
• /
• 2011

Novel chromium(III), manganese(II), iron(III), cobalt(II), nickel(II), copper(II), ruthenium(III), and zirconyl(II) complexes of $N^1,N^2$-bis(3-((3-hydroxynaphthalen-2-yl)methylene-amino)propyl)phthalamide ($H_4L$, 1) have been synthesized and characterized by elemental, physical, and spectral analyses. The spectral data showed that the ligand behaves as either neutral tridentate ligand as in complexes 2-5 with the general formula $[H_4LMX_2(H_2O)]{\cdot}nH_2O$ (M=Cu(II), Ni(II), Co(II), X = Cl or $NO_3$), neutral hexadentate ligand as in complexes 10-12 with the general formula $[H_4LM_2Cl_6]{\cdot}nH_2O$ (M=Fe(III), Cr(III) or Ru(III)), or dibasic hexadentate ligand as in complexes 6-9 with the general formula $[H_2LM_2Cl_2(H_2O)_4]{\cdot}nH_2O$ (M = Cu(II), Ni(II), Co(II) or Mn(II), and 13 with general formula $[H_4L(ZrO)_2Cl_2]{\cdot}8H_2O$. Molar conductance in DMF solution indicated the non-ionic nature of the complexes. The ESR spectra of solid copper(II) complexes 2, 5, and 6 showed $g_{\parallel}$ >g> $g_e$, indicating distorted octahedral structure and the presence of the unpaired electron in the $N^1,N^2$ orbital with significant covalent bond character. For the dimeric copper(II) complex $[H_2LCu_2Cl_2(H_2O)_4]{\cdot}3H_2O$ (6), the distance between the two copper centers was calculated using field zero splitting parameter for the parallel component that was estimated from the ESR spectrum. The antibacterial and antifungal activities of the compounds showed that, some of metal complexes exhibited a greater inhibitory effect than standard drug as tetracycline (bacteria) and Amphotricene B (fungi).

• Journal of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.662-668
• /
• 1989

The decomposition reaction of hydrogen peroxide was carried out by using metal-4,4',4",4"'-tetraaminophthalocyanine [Mt-$PcNH_2$, Mt = Fe(III), Co(II)] supported on poly (styrene-co-methacrylic acid), in heterogeneous aqueous system. These catalysts showed a catalse-like activity and Fe(III)-$PcNH_2$ supported on the copolymer was particularly effective for the decomposition of hydrogen peroxide. It was found that the rate of decomposition increased smoothly in the higher pH region and catalytic reaction was interfered by adding $CN^-,\;CNS^-,\;{C_2O_4}^{-2},\;I^-$ ions. The kinetics of the catalytic reaction was also investigated and the reaction proceeds according to the Michaelis-Menten type mechanism.

• Korean Journal of Materials Research
• /
• v.13 no.5
• /
• pp.279-284
• /
• 2003

The $CoSi_2$ process is widely employed in a salicide as well as an ohmic layer process. In this experiment, we investigated the characteristics of $CoSi_2$ films by combinations of I-type (TiN 100$\AA$/Co 150$\AA$), II-type(TiN 100$\AA$/Co 150$\AA$/Ti 50$\AA$), III-type(Ti 100$\AA$/Co 150$\AA$/Ti 50$\AA$), and IV-type(Ti 100$\AA$/Co 150$\AA$/Ti 100$\AA$). Sheet resistances of $CoSi_2$ show the lowest resistance with 2.9 $\Omega$/sq. in a TiN/Co condition and much higher resistances in conditions simultaneously applying Ti capping layers and Ti interlayers. Though we couldn't observe a $CoSi_2$roughness dependence on the film stacks from RMS values, Ti capping layers turned into 78∼94$\AA$ thick TiN layers of (200) preferred orientation at $N_2$ambient. In addition, Ti interlayers helped to form the epitaxial $CoSi_2$with (200) preferred orientation and ternary compounds of Co-Ti-Si. We propose that film structures of II-type and III-type may be appropriate in the salicide process and the ohmic layer process from the viewpoint of Co diffusion kinetics and the CoSi$_2$epitaxy.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1581-1585
• /
• 2012

Two pyridinecarboxamide dicyanidecobalt(III) building blocks and two mononuclear seven-coordinated macrocycle manganese(II) compounds have been rationally selected to assemble cyanide-bridged heterobimetallic complexes, resulting in three cyanide-bridged $Co^{III}-Mn^{II}$ complexes. Single X-ray diffraction analysis show that these complexes $\{[Mn(L^1)][Co(bpb)]\}ClO_4{\cdot}CH_3OH{\cdot}0.5H_2O$ ($\mathbf{1}$), $\{[Mn(L^2)][Co(bpb)]\}ClO_4{\cdot}0.5CH_3OH$ ($\mathbf{2}$) and ${[Mn(L^1)][Co(bpb)]\}ClO_4{\cdot}H_2O$ ($\mathbf{3}$) ($L^1$ = 3,6-diazaoctane-1,8-diamine, $L^2$ = 3,6-dioxaoctano-1,8-diamine; $bpb2^{2-}$ = 1,2-bis(pyridine-2-carboxamido)benzenate, $bpmb2^{2-}$ = 1,2-bis(pyridine-2-carboxamido)-4-methyl-benzenate) all present predictable one-dimensional single chain structures. The molecular structures of these one-dimensional complexes consists of alternating units of $[Mn(L)]^{2+}$ ($L=L^1$ or $L^2$) and $[Co(L^{\prime})(CN)2]^-$ ($L^{\prime}=bpb2^{2-}$, or $bpmb2^{2-}$), forming a cyanide-bridged cationic polymeric chain with free $ClO_4{^-}$ as the balance anion. The coordination geometry of manganese(II) ion in the three one-dimensional complexes is a slightly distorted pentagonal-bipyrimidal with two cyanide nitrogen atoms at the trans positions and $N_5$ or $N_3O_2$ coordinating mode at the equatorial plane from ligand $L^1$ or $L^2$. Investigation over magnetic properties of these complexes reveals that the very weak magnetic coupling between neighboring Mn(II) ions connected by the diamagnetic dicyanidecobalt(III) building block. A best-fit to the magnetic susceptibility of complex ${\mathbf}{1}$ leads to the magnetic coupling constants $J=-0.084(3)cm^{-1}$.

• Journal of the Korean Ceramic Society
• /
• v.49 no.1
• /
• pp.84-89
• /
• 2012

Attempts were made to develop a stable gray pigment at reducing atmosphere, substituting Ti in $ZrTiO_4$ with Mn, Fe, Co and Cu The pigment synthesized at $1300~1500^{\circ}C$ by solid state method with the composition of $ZrTi_{1-x-y}A_xB_yO_4$ (x = y = 0.005, 0.015, 0.035, 0.055, 0.075, 0.095, 0.115, 0.135, 0.155, 0.175 and 0.195 mole, A = Mn(III), Fe(III), Co(II, III) and Cu(II) (chromophores), B = Sb (counterion). The pigments were fired at $1400^{\circ}C$ for 3 h with substitute amount changes of Mn, Fe, Co and Cu to $ZrTiO_4$ crystals, and analyzed by Raman spectroscopy to figure out substitute limits. Results indicated 0.035 mole for Mn, 0.115 mole for Fe, 0.015 mole for Co and 0.015 mole for Cu as substitute limits, respectively. Figs. 1, 2, 3, and 4 represent each substitute pigments of Mn, Fe, Co and Cu. Synthesized pigment was applied to a lime and a lime-magnesia glaze at 7 wt% each, and fired at reducing atmosphere of $1240^{\circ}C$, soaking time 1h. Gray color was obtained with CIE-$L^*a^*b^*$ values at 44.55, -0.65, 1.19(Mn), 40.36, -0.90, 0.30(Fe), 42.63, -0.03, -1.49(Cu) and -40.79, -0.28, -0.91(Co), respectively.

• Journal of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.500-505
• /
• 1991

The stereoselectivity on the electron-transfer reaction between optical active ${\bigwedge}$-[CO(EDDS)]- and conformationally restricted complex $[Co({\pm}chxn)_3]^{2+}$ has been examined in aqueous solution. The products are four conformational isomers $(lel_3,\;lel_2ob,\;lelob_2,\;and\;ob_3)$ of ${\bigwedge}$-[Co(chxn)$_3]^{3+}$ with optical purities of 22% e.e, 25% e.e, 11% e.e, and 10% e.e, respectively. The reaction between ${\bigwedge}$-[CO(EDDS)]- and $[Co({\pm}chxn)_3]^{2+}$ in DMSO produced lel3-${\Delta}$ and lel2ob-${\Delta}$-[Co(chxn)$_3]^{3+}$ whose optical purities are 100% e.e, and 75% e.e, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2544-2548
• /
• 2011

Two pyridinecarboxamide cobalt dicyanide building blocks and Mn(III) compounds have been employed to assemble cyanide-bridged heterometallic complexes, resulting in three trinuclear cyanide-bridged $Co^{III}-Mn^{II}$ complexes: $\{[Mn(MeOH)_4][Co(bpb)(CN)_2]_2\}{\cdot}2MeOH{\cdot}2H_2O$ (1), $\{[Mn(MeOH)_4][Co(bpmb)(CN)_2]_2\}{\cdot}2MeOH{\cdot}2H_2O$ (2) and $\{[Mn(DMF)_2(en)_2][Co(bpb)(CN)_2]_2\}{\cdot}2DMF{\cdot}H_2O$ (3) ($bpb^{2-}$ = 1,2-bis(pyridine-2-carboxamido)benzenate, $bpmb^{2-}$ = 1,2-bis(pyridine-2-carboxamido)-4-methyl-benzenate, en = ethylenediamine). Single crystal X-ray diffraction analysis shows their similar sandwich-like structures, in which the two cyanide-containing building blocks act as monodentate ligands through one of their two cyanide groups to coordinate the Mn(II) center. For complex 3, it was further linked into one-dimensional structure by ethylenediamine acting as bridges. Investigation of the magnetic properties of complex 3 reveals weak antiferromagnetic coupling between the neighboring Mn(II) centers through the bridging ethylenediamine molecule. A best-fit to the magnetic susceptibilities of complex 3 gave the magnetic coupling constant J = -0.073(2) $cm^{-1}$.

• Textile Coloration and Finishing
• /
• v.17 no.1
• /
• pp.20-29
• /
• 2005

Cotton fabric was treated with a reactive anionic agent in order to have anionic sites(-S03-) on it, which made it possible for the fabric to adsorb various cationic materials. In this study, the adsorptivity of various heavy metal ions such as Pb(II), Cd(II), Cr(III), Co(II), Cu(II), Ni (II) and Cr(VI) on the cotton fabrics treated with anionic agent was examined at the various conditions; concentrations of heavy metal ions, pHs of solution, reaction time and temperature. As a result, the adsorptivity of the heavy metal ions on the cotton fabrics treated with the anionic agent was highly increased comparing to that of untreated cotton fabrics. The order of the adsorptivity was as follows: $Pb(II)>Cd(II)>Cu(II)\geqNi(II)\geqCo(II)>Cr(III)\ggCr(VI)$. The adsorption amounts of most heavy metal ions were increased in weak alkaline conditions and were reached to an adsorption equilibrium within 10 ~ 30 minutes. The maximum adsorption ratios of Pb(II) and Cd(II) were respectively 99% and 80% of the initial concentration of heavy metal ions. Therefore the anionized cotton fabrics seem to be utilized as an adsorption fabrics for the removal of heavy metal ions in the waste water.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.2
• /
• pp.158-162
• /
• 1992

Hydrocarbon solution of $(PPh_3)_2(CO)MOSO_2CF_3(M=Rh$, Ir)reacts rapidly with Pyrazine or 4,4'-bipyridyl to yield dinuclear metal complexes $[(PPh_3)_3(CO)M({\mu}-pyrazine)M(CO)(PPh_3)_2](SO_3CF_3)_2$ (I: M= RhH; III: M=Ir) or [$(PPh_3)_2$(CO)M(${\mu}$-44'-bipyridyl)M(CO)$(PPh_3)_2](SO_3CF_3)_2$, (II: M=Rh; IV: M=Ir), respectively. Compounds, I, II, III, and IV were characterized by $^1H-NMR$, $^{13}C-NMR$, $^{31}P-NMR$, and infrared spectrum. Ethanol solution of $(PPh_3)_2(CO)MOSO_2CF_3$ (M=Rh, Ir) also reacts with $(TBA)_2$M'$(CN)_4$ (M'=Pd, Pt) to yield trinuclear metal complexes [$(PPh_3)_2$(CO)dM-NCM'$(CN)_2$CN-M(CO)$(PPh_3)_2]$ (V : M=Rh, M'=Pd; VI : M=Rh, M'=Pt; VII: M=Ir, M'=Pd; VIII: M=Ir, M'=Pt). The trinuclear metal complexes V, VI, VII, and VIII are bridged by the cyanide groups. The infrared spectrum of V, VI, VII, and VIII supports the presence of the bridged cyanide and terminal cyanide group.