• Macromolecular Research
• /
• 제15권5호
• /
• pp.393-395
• /
• 2007

• 공업화학
• /
• 제28권5호
• /
• pp.581-586
• /
• 2017

본 연구에서는 하수 슬러지 및 음폐수의 효율적인 병합처리를 위해 고온호기 전처리의 적용가능성을 알아보고자 고온호기-중온혐기 연계공정의 소화효율과 메탄가스 생성량에 미치는 영향을 비교 검증하였다. 또한, 유기물 부하량 증가에 따른 공정 내 변화 양상을 관찰하기 위해 실험실 규모의 고온호기-중온혐기 소화장치를 제작하여 음폐수를 증류수로 희석하는 비율을 1/3 (Run I), 2/3 (Run II) 및 원액(Run III)으로 줄여가며 혐기소화 공정 내 변화 양상을 관찰하였다. 실험 결과 별도의 pH 조절 없이 고온호기-중온혐기 연계공정 소화조 내에서 pH가 7~8으로 안정하게 유지됨을 알 수 있었다. Volatile solid (VS)는 순응 기간 후 고온호기-중온혐기 연계공정에서 52.24% (Run I), 66.59% (Run II) 및 72.53% (Run III)의 제거효율을 보이며, 중온혐기 소화조(R3)에 비교하여 높은 VS 제거율을 보였다. 또한, 고온호기-중온혐기(R1-R2) 연계공정에서 약 1.6배 향상된 메탄 생성률이 관찰되었으며, 메탄수율의 경우에도 고온호기-중온혐기(R1-R2) 연계공정에서 현저하게 높은 값을 유지하였다.

• 대한치과교정학회지
• /
• 제26권3호
• /
• pp.255-265
• /
• 1996

본 연구는 III급 부정교합자에서 중심교합상태의 두부 방사선 사진과 MPI 수치를 이용하여 중심위로 전환한 두부 방사선 사진(Centrically related cephalometrics)을 계측하여 중심위 변위시 유의한 계측치 변화가 있는지 확인하고자 시행되었다. 교정치료의 경험이 없는 25명의 III급 부정교합군과 25명의 정상교합군을 대상으로 하여, 중심교합위 상태의 측모 두부 방사선 사진과 중심위 및 중심교합위 기록을 채득하고, 모형을 SAM II 교합기에 부착하였다. 중심위 변위 량은 MPI(Mandibular Position Indicator)를 이용하여 계측하였으며, MPI 수치와 중심교합위 상태의 측모 두부 방사선 사진의 투사도를 이용하여 Conversion work sheet상에서 중심위 전환을 시행하였다. 두부 방사선 계측 항목은 하악골의 위치와 관계되는 것을 선택하였다. 정상교합군과 III급 부정교합군에서 중심위와 중심교합위간의 계측치 변화를 연구하여 다음과 같은 결과를 얻었다. 1. 하악 과두에서의 중심위 변위량은 정상교합군에서 전후방 변위량$({\Delta}X)0.56{\pm}0.50mm$, 수직적 변위량$({\Delta}Z)-0.61{\pm}0.53mm$였으며, III급 부정교합군에서 전후방 변위량$({\Delta}X)0.93{\pm}0.77mm$, 수직적 변위량$({\Delta}Z)-0.64{\pm}0.89mm$로, 두군 모두 후하방 변위양상을 나타냈다. III급 부정교합군에서 정상교합군보다 전후방 변위량이 더 크게 나타났으나 통계학적인 유의성은 없었다. 2. 중심교합위와 중심위 두부 방사선 사진의 계측치를 비교해 본 결과 정상교합군에서 ANB, Facial angle, Facial convexity, ODI 둥의 항목이 유의한 차이를 나타냈다. III급 부정교합군에서는 ANB, Facial angle, Facial convexity, ODI, SNB, APDI, L1-FP 등 유의한 차이를 보이는 항목이 더 많았고 유의성도 더 높게 나타났다. 3. 두부 방사선 사진의 계측치 변화는 중심위 변위와는 연관성이 있었으나, 정상교합군과 III급 부정교합군에 대한 연관성이 없었다. 이상의 결과는 중심위 변위량이 임상적으로 재현할 수 있는 중심위 위치에서 정상적으로 변위되는 양보다 큰 경우 중심위는 교정 환자에서 적절한 진단과 치료 계획 수립을 위한 기준 점으로 고려되어야 함을 시사하였다.

• 한국수산과학회지
• /
• 제36권4호
• /
• pp.340-345
• /
• 2003

In order to choose the manufacturing method for extracting alginates from sea tangle, Laminaria japonica, three methods were applied. In Method I, alginates were extracted with NaOH solution from sea tangle powder and extracted alginates were precipitated and converted to alginic acid by $CaCl_2$ and HCI solution. Then alginic acid was converted to sodium alginates with $Na_2CO_3$ solution. Sodium alginates were precipitated with methyl alcohol and were resolved with hot water and this step was repeated three times. Method II was same to Method I except final step including that sodium alginates were precipitated and washed with methyl alcohol three times. Method III included that sodium alginates were extracted with $Na_2CO_3$ solution from sea tangle powder then sodium alginates were precipitated and washed with methyl alcohol three time. Extracting time increased with Increasing extracted alginates amounts but increasing rates were below $0.4\%/h.$ Alginates amounts recovered by Method III showed above 2 times more to those by Method I and II. Extracting time increased with increasing ash amount of sodium alginates but increasing rates were below $0.1\%/h.$ and that of sodium alginates extracted by Method III showed higher value $(5\%)$ than those by Method I and II. In the sodium alginates prepared by Method III, the amount of ash in alginates dried by air was $34.4\%,$ that by vacuum freeze drying was $47.8\%.$ Extracting time increased with decreasing average molecular weight (MW) and degree of polymerization (DP) of sodium alginates, MW and DP of alginates prepared by Method III were higher than those by Method I and II In same extracting time. Extracting time increased with decreasing rate of apparent viscosity change (SAV) of alginates solution, and SAV of alginates prepared by Method III showed higher value than those by Method I and II in same extracting time. SAV of alginates dried by air was higher than that by vacuum freeze drying. Relating equation among SAV MW and DP were MW = 60.066 (SAV) -93.950, DP =309.760 (SAV) -485.084 and MW = 0.914 (DP)+0.213.

• 자원환경지질
• /
• 제30권6호
• /
• pp.519-529
• /
• 1997

Volcanic rocks including rhyolitic tuff, rhyolite and welded tuff in the Bupyeong silver mine area form a topographic circular structure which is interpreted as a resurgent caldera. Granitic rocks are emplaced inside and outside area of the circular structure. Pervasive silver mineralization took place in the rhyolitic rock of the southwestern margin of the caldera. Gas and fluid incluson studies were carried out to investigate the petrogenetic evolution and post-magmatic alteration for the rhyolitic and granitic rocks. Gas compositions are characterized by a low $CH_4/CO_2$ ratio (0.004-0.005) for rhyolitic and inside granitic rocks and a high $CH_4/CO_2$ ratio (0.01~0.29) for outside granitic rocks such as the Kimpo and Incheon granites. Homogenization temperature of solid daughter mineral bearing fluid inclusion (III and IV types) and two phase fluid inclusion (I and II types) for quartz in the Bupyeong granites range from 400 to $500^{\circ}C$ and 121 to $514^{\circ}C$, respectively. Salinties vary from 20 to 30 wt% NaCl for type III and IV inclusions and less than 20 wt % NaCl for type I and II inclusions. The fluid inclusion data shows a considerable influx of the meteoric water toward post magmatic alteration stage.

• Bulletin of the Korean Chemical Society
• /
• 제25권7호
• /
• pp.1019-1024
• /
• 2004

The present paper is focused on simultaneous sorption concentration of gold (III) and silver (I) from thiocyanate solutions using high-selective anion exchanger AN-25 and subsequent separation of these ions at various concentrations of thiocarbamide (eluent). As a result, silver (I) ions are completely eluted from AN-25 and gold (III) ions remain in the resin phase and can be determined directly in the solid phase by diffuse reflection spectroscopy. It is proposed to use the sorption-spectroscopic method for Au(III) determination in aqueous solutions. The calibration curve is linear in the concentration range of 1-19 mg/L (sample volume is 10.0 mL) and the detection limit is 0.05 ${\mu}g/mL$. The presence of Cu(II), Co(II), Fe(II) do not hinder this determination. Au(III) was determined in industrial solutions.

• 자원환경지질
• /
• 제39권2호
• /
• pp.103-109
• /
• 2006

Sphagnum 피트모스에서의 Cd(II), Cu(II) Pb(II)의 흡착에 대한 회분식 실험을 수행하였다. 실험결과 10-50 mg/L의 Cd(II), Cu(II), Pb(II)이 1.0 g/L의 sphagnum 피트모스에 1시간 내에 흡착되어 효과적으로 제거되었다. 초기농도에 따라 sphagnum 피트모스에 홉착된 Cd(II), Cu(II), Pb(II)의 반응속도는 유사이차 반응모델을 적용하여 설명하였다. 또한 Langmuir 등온흡착으로부터 Cd(II), Cu(II), Pb(II)에 대한 최대흡착량을 계산하여, 각각 33.90, 29.15, 91.74 mg/g가 sphagnum 피트모스에 흡착될 수 있음을 알아내었다. Sphagnum 피트모스가 Cd(II), Cu(II), Pb(II)를 흡착하는데 매우 효과적인 흡착제임을 실험결과를 통해 나타내었다.

• 자원환경지질
• /
• 제42권5호
• /
• pp.487-494
• /
• 2009

본 연구에서는 무산소 환경에서 As(III)로 대체된 자철석으로의 침전 가능성을 확인하기 위하여 Fe(II)와 As(V)의 반응을 통한 As(V)의 As(III)로의 환원 여부를 조사하였다. Fe(II)와 As(V)가 용액상으로 존재하는 균질조건에서의 환원반응 실험은 pH에 따른 영향을 알아보기 위해 수행되었고, 주어진 pH 조건(3.0~7.3)에서 용해된 Fe(II)에 의한 As(V)의 As(III)로의 환원반응은 일어나지 않았다. 균질조건에서의 환원반응 실험결과와 유사하게 침철석을 이용한 불균질조건에서의 환원반응 실험에서도 침철석에 흡착된 Fe(II)에 의한 As(V)의 환원반응은 일어나지 않았다. 또한 Fe(II)의 산화에 미치는 As(V)의 영향에 대한 회분식 실험결과, As(V)가 Fe(II)의 산화반응을 저해하는 영향을 주었고 균질한 조건에서보다 불균질한 조건에서 As(V)의 영향이 명확하게 나타난 것으로 사료된다. 이런 결과들은 무산소 및 지하 환경에서 Fe(II)와 공존할 때, As(V)는 안정한 상태로 존재함을 시사한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권6호
• /
• pp.700-707
• /
• 2010

Effects of protease-resistant antimicrobial substances (PRA) produced by Lactobacillus plantarum and Leuconostoc citreum on rumen methanogenesis were examined using the in vitro continuous methane quantification system. Four different strains of lactic acid bacteria, i) Lactococcus lactis ATCC19435 (Control, non-antibacterial substances), ii) Lactococcus lactis NCIMB702054 (Nisin-Z), iii) Lactobacillus plantarum TUA1490L (PRA-1), and iv) Leuconostoc citreum JCM9698 (PRA-2) were individually cultured in GYEKP medium. An 80 ml aliquot of each supernatant was inoculated into phosphate-buffered rumen fluid. PRA-1 remarkably decreased cumulative methane production, though propionate, butyrate and ammonia N decreased. For PRA-2, there were no effects on $CH_4$ and $CO_2$ production and fermentation characteristics in mixed rumen cultures. The results suggested that PRA-1 reduced the number of methanogens or inhibited utilization of hydrogen in rumen fermentation.

• Journal of Construction Engineering and Project Management
• /
• 제1권1호
• /
• pp.11-17
• /
• 2011

According to the United Nations Framework Convention on Climate Change (UNFCCC), many countries around the world have been concerned with reducing Greenhouse Gas (GHG) emissions. Reducing the level of building energy consumption is particularly important in bringing GHG down. Because of this, many countries including the US and the EU are enforcing energy-related policies. However, these policies are focused on management of single types of buildings such as public buildings and office buildings, instead of management on a national level. Thus, although various policies have been enforced in many countries, $CO_2$ management on a national level is still not an area of focus. Therefore, this study proposed a community-based $CO_2$ management process that allows government-led GHG management. The minimum unit of the community in this study is a plot, and the process consists of three steps. First, the current condition of the GHG emission was identified by plot. Second, based on the identified results, the GHG emission reduction target was distributed per plot by reflecting the weighted value according to (i) the target $CO_2$ reduction in the buildings in the standard year, (ii) region, and (iii) building usage and size. Finally, to achieve the allocated target reduction, building energy management was executed according to the properties of the building located on each plot. It can be expected that the proposed community-based $CO_2$ management process will enable government-level GHG management, through which environment-friendly building construction can be promoted.