• 대한화학회지
• /
• 제10권1호
• /
• pp.4-10
• /
• 1966

A new method of cobalt determination has been developed by employing ethylenediamine tetrabutyl acetate(EDTA-butyl ester) synthesized from EDTA and Butyl alcohol. The synthesized EDTA ester dissolved in butyl alcohol extracts various metal ions from aqueous solutions. Cobaltous ion extracted into organic phase containing EDTA ester to form Co (II)-EDTA butyl ester complex is back extracted into alkaline aqueous phase forming a stable pink colored complex of Co (III). The optimum condition for spectrophotometric determination of cobalt via the new complex has been established. The absorption peak occurs at 540$m{\mu}$ and Beer's law was obeyed over the concentration range of 0∼50 ${\mu}g/ml$ of cobalt.

• 분석과학
• /
• 제12권6호
• /
• pp.515-520
• /
• 1999

Al(III)-thorin 착물에 대한 분광학적 정량 방법을 연구하였다. pH, 리간드와 계면활성제의 농도 및 안정화 시간에 대한 최적 조건을 결정하였다. thorin 리간드는 Fe(III), Ni(II), Cu(II), Pb(II) 그리고 Co(II)를 포함한 시료용액으로부터 Al(III)을 선택적으로 분리할 수 있도록 해준다. 여러 계면활성제중에서 비이온성인 Triton X-100에서 가장 안정한 상태를 나타냈고 수용액 중에서 Al(III)-Thorin-Triton X-100 착물은 526 nm에서 최대 흡광도를 가진다. 이 방법은 혼합된 시료용액에서 Al(III)을 정량하는데 이용되었다. 그리고, 분리 및 예비농축과정은 resoreinol-fermaldehyde 수지로 채워진 컬럼을 이용하였다. 컬럼 단계에서 수지의 흡착 능력은 pH변화에 매우 민감하기 때문에 pH를 조절하는 것이 필수적이다. 분리과정은 0.2 M acetic acid-sodium acetate 완충용액 (pH 4.5)와 1.0 M $HNO_3$용액으로 이루어졌다.

• Bulletin of the Korean Chemical Society
• /
• 제19권1호
• /
• pp.50-56
• /
• 1998

A solvent sublation was studied for the determination of trace Cd, Co, Cu and Ni in water samples. Ammonium pyrrolidine dithiocarbamate (APDC) was used as a complexing agent. Experimental conditions such as pH of solution, amounts of APDC, the type and amount of surfactant, the type of solvent, etc. were optimized for the effective sublation of analytes. After metal-PDC complexes were formed in sample solutions of pH 2.5, the precipitate-type complexes were floated in a flotation cell with an aid of sodium lauryl sulfate as a surfactant and by bubbling with nitrogen gas. The precipitates were dissolved and separated into the surface layer of methyl iso-butyl ketone (MIBK). The analytes preconcentrated were determined by a graphite furnace atomic absorption spectrophotometry (GF-AAS). Extractability of each element was 88% for Cd(Ⅱ), 86% for Co(Ⅱ), 95% for Cu(Ⅱ) and 76% for Ni(Ⅱ), respectively. And this procedure was applied to the analysis of real samples. From the recoveries of more than 92%, it was concluded that this method could be simple and applicable for the determination of trace elements in various water samples of a large volume.

• 약학회지
• /
• 제5권1호
• /
• pp.24-26
• /
• 1960

Micro-determination of Lead by Dithizone Method was studied as follows: 1) Max. absorption wave length of Dithizone-pb complex in CC $l_{4}$ soln. is 510m.mu., 2) at the range of 5.gamma.-120.gamma. pb content, Bourguer-Beer's law hold good, 3) co-existence of F $e^{++}$ Z $n^{++}$, and C $u^{++}$ interfere.rfere.

• 한국환경보건학회지
• /
• 제24권3호
• /
• pp.1-5
• /
• 1998

A spectrophotometric method was developed for the acidic solution stripped after an extraction of 0.5 to 2.5 ppm of Lead(II) from 50 mL of $Na_2S_2O_3$ solution into chloroform as the ion-pairs formed between their thiosulfate complexes and alkylamine, Aliquat336. Pb(II) in the stripped solution forms an complex with DDTC in pH 7.3 buffer solution, and was developed in yellow by copper replacement. The ydlow-colored solution have the maximum absorbance at 435 nm in the measurement of absorbance by UV-Visible spectrophotometer. The interference ions such as Fe(III), Hg (II), Al(III), Co, Cu, Ni, Zn, Ca, Sn, have great effects on the extraction, but they were overcomed by the usage of adequate masking agents before an extraction. At last, a good result was obtained in applying this method to synthetic water.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.444-450
• /
• 2011

A novel method that utilizes poly(5-methyl-2-thiozyl methacrylamide-co-2-acrylamido-2-methyl-1-propanesulfonic acid-co-divinylbenzene) [MTMAAm/AMPS/DVB] as a solid-phase extractant was developed for simultaneous preconcentration of trace Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Mn(II), Ni(II), Pb(II), and Zn(II) prior to the measurement by flame atomic absorpiton spectrometry (FAAS). Experimental conditions for effective adsorption of the metal ions were optimized using column procedures. The optimum pH value for the simultaneously separation of the metal ions on the new adsorbent was 2.5. Effects of concentration and volume of elution solution, sample flow rate, sample volume and interfering ions on the recovery of the analytes were investigated. A high preconcentration factor, 100, and low relative standard deviation values, $\leq$1.5% (n = 10), were obtained. The detection limits (${\mu}gL^{-1}$) based on the 3s criterion were 0.18 for Cd(II), 0.11 for Co(II), 0.07 for Cr(III), 0.12 for Cu(II), 0.18 for Fe(III), 0.67 for Mn(II), 0.13 for Ni(II), 0.06 for Pb(II), and 0.09 for Zn(II). The validation of the procedure was performed by the analysis of two certified reference materials. The presented method was applied to the determination of the analytes in various environmental samples with satisfactory results.

• 분석과학
• /
• 제8권3호
• /
• pp.285-292
• /
• 1995

우라늄은 여러 가지 산화상태(${UO_2}^{+2}$, $UO^{+2}$, $U^{+3}$, $U^{+4}$)를 가지며 1-(2-Pyridylazo)-2-naphthol은 ${UO_2}^{+2}$과 매우 안정한 킬레이트를 형성한다. 0.1M borate 완충용액 (PH 7.10)에서 흡착벗김전압전류법으로 우라늄(${UO_2}^{+2}$)의 정량방법을 조사하였다. 분석의 최적 조건은 PAN의 농도 $5{\times}10^{-7}M$, 흡착전위 0.0V(vs. Ag/AgCl), 흡착시간 120초였다. 검정곡선은 $5{\sim}60{\mu}g/L$까지 양호한 직선성을 보여 주었다. 이 방범은 Cu(II)와 Co(II)를 제외한 다른 금속이온의 방해는 없었다.

• Membrane and Water Treatment
• /
• 제9권5호
• /
• pp.363-371
• /
• 2018

In this work, it was investigated the usability of artificial bee colony (ABC) and genetic algorithm (GA) in modeling adsorption of Co(II) onto drinking water treatment sludge (DWTS). DWTS, obtained as inevitable byproduct at the end of drinking water treatment stages, was used as an adsorbent without any physical or chemical pre-treatment in the adsorption experiments. Firstly, DWTS was characterized employing various analytical procedures such as elemental, FT-IR, SEM-EDS, XRD, XRF and TGA/DTA analysis. Then, adsorption experiments were carried out in a batch system and DWTS's Co(II) removal potential was modelled via ABC and GA methods considering the effects of certain experimental parameters (initial pH, contact time, initial Co(II) concentration, DWTS dosage) called as the input parameters. The accuracy of ABC and GA method was determined and these methods were applied to four different functions: quadratic, exponential, linear and power. Some statistical indices (sum square error, root mean square error, mean absolute error, average relative error, and determination coefficient) were used to evaluate the performance of these models. The ABC and GA method with quadratic forms obtained better prediction. As a result, it was shown ABC and GA can be used optimization of the regression function coefficients in modeling adsorption experiments.

• Bulletin of the Korean Chemical Society
• /
• 제27권9호
• /
• pp.1293-1296
• /
• 2006

In this study, a solid phase extraction method has been developed for the preconcentration and separation of the elements Cr(III), Fe(III), Co(II) and Pb(II) at trace levels by using a column packed with Amberlite XAD-1180 resin loaded with 4-(2-pyridylazo)-resorcinol (PAR) reagent. After preconcentrating, the metals retained on the column were eluted with 20 mL of 3 mol/L $HNO_3$ and then determined by flame atomic absorption spectrometry (FAAS). The factors affecting the recovery of the elements, such as pH, type and concentration of eluent, volume of sample and elution solution, and matrix components, were also ascertained. The recoveries of Cr(III), Fe(III), Co(II) and Pb(II) were found to be $99\;{\pm}\;4,\;97\;{\pm}\;3,\;95\;{\pm}\;3$ and $98\;{\pm}\;4$%, respectively, under the optimum conditions at 95% confidence level and the relative standard deviations found by analyzing of nine replicates were $\leq4.4$%. The preconcentration factors for Cr(III), Fe(III), Co(II) and Pb(II) were found as 75, 125, 50 and 75 respectively. The detection limits (DL, 3s/b) were 3.0 $\mu g/L$ for Cr(III), 1.25 $\mu g/L$ for Fe(III), 3.3 $\mu g/L$ for Co(II), and 7.2 $\mu g/L$ for Pb(II). The recoveries achieved by adding of metals at known concentrations to samples and the analysis results of Buffalo river sediment (RM 8704) show that the described method has a good accuracy. The proposed method was applied to tap water, stream water, salt and street dust samples.

• Bulletin of the Korean Chemical Society
• /
• 제25권7호
• /
• pp.1019-1024
• /
• 2004

The present paper is focused on simultaneous sorption concentration of gold (III) and silver (I) from thiocyanate solutions using high-selective anion exchanger AN-25 and subsequent separation of these ions at various concentrations of thiocarbamide (eluent). As a result, silver (I) ions are completely eluted from AN-25 and gold (III) ions remain in the resin phase and can be determined directly in the solid phase by diffuse reflection spectroscopy. It is proposed to use the sorption-spectroscopic method for Au(III) determination in aqueous solutions. The calibration curve is linear in the concentration range of 1-19 mg/L (sample volume is 10.0 mL) and the detection limit is 0.05 ${\mu}g/mL$. The presence of Cu(II), Co(II), Fe(II) do not hinder this determination. Au(III) was determined in industrial solutions.