• Journal of Sensor Science and Technology
• /
• v.15 no.1
• /
• pp.53-57
• /
• 2006

This paper describes a novel processing technique for fabrication of polymer-derived SiCN (silicone carbonitride) microstructures for super-temperature MEMS applications. PDMS (polydimethylsiloxane) mold is fabricated on SU-8 photoresist using standard UV photolithographic process. Liquid precursor is injected into the PDMS mold. Finally, solid polymer structure is cross-linked using HIP (hot isostatic pressure) at $400^{\circ}C$, 205 bar. Optimum pyrolysis and annealing conditions are determined to form a ceramic microstructure capable of withstanding over $1400^{\circ}C$. The fabricated SiCN ceramic microstructure has excellent characteristics, such as shear strength (15.2 N), insulation resistance ($2.163{\times}10^{14}{\Omega}$) and BDV (min. 1.2 kV) under optimum process condition. These fabricated SiCN ceramic microstructures have greater electric and physical characteristics than bulk Si wafer. The fabricated SiCN microstructures would be applied for supertemperature MEMS applications such as heat exchanger and combustion chamber.

• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.2
• /
• pp.91-97
• /
• 2000

The structure and mechanical properties of TiN and TiCN thin films deposited on STD61 steel substrates by the RF-sputtering methods has been studied by using XPS, XRD, micro-hardness tester, scratch tester, and wear-resistance tester. XPS results showed that the TiCN thin film formed with chemical bonding state. The TiN thin films grew with (111) orientation having the lowest strain energy by compressive stress, whereas the TiCN thin films grew with both (111) and (200) orientation, but (200) orientation having the lowest surface energy becomes dominant as carbon contents increase. The pre-etching treatment of substrate did not affect on the preferred orientation of thin films, but it played an important role in improving mechanical properties of thin films such as the hardness, adhesion and wear- resistance. Especially, the TiCN thin films showed the superior wear resistances due to high hardness and low friction coefficient compared with TiN thin films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.392-393
• /
• 2006

This paper describes the fabrication of SiCN microstructures for super-high temperature MEMS using photopolymerization of pre-ceramic polymer. In this work. polysilazane liquide as a precursor was deposited on Si wafers by spin coating. microstructured and solidificated by UV lithography. and removed from the substrate. The resulting solid polymer microstructures were cross-linked under HIP process and pyrolyzed to form a ceramic of withstanding over $1400^{\circ}C$. Finally, the fabricated SiCN microstructures were annealed at $1400^{\circ}C$ in a nitrogen atmosphere. Mechanical characteristics of the SiCN microstructure with different fabrication process conditions were evaluated. The elastic modules. hardness and tensile strength of the SiC microstructure implemented under optimum process conditions are 94.5 GPa, 10.5 GPa and 11.7 N/min, respectively. Consequently, the SiCN microstructure proposed in this work is very suitable for super-high temperature MEMS application due to very simple fabrication process and the potential possiblity of sophisticated multlayer or 3D microstructures as well as its good mechanical properties.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.945-948
• /
• 2011

기존의 모바일 IPv6에서 경로 최적화를 하기 위해 바인딩 업데이트를 할 때 RR 프로토콜을 사용한다. IPv6에서 바인딩 업데이트는 이동노드가 홈 네트워크에서 외부 네트워크로 이동했을 때 Home Agent와 Correspondent Node(CN)에게 전송하며 이 과정에서 몇 가지 취약점으 가지고 있다. HoIT와 CoIT 메시지는 서로 연관이 없으며 이동 단말과 HA사이에만 IPSec으로 보호된 터널이 존재하고 HA와 CN 사이에는 보호되지 않는다. 따라서 공격자는 CN과 가까이에 위치하여 자신의 CoA를 CN에게 CoIT를 보내 토큰을 받아서 CN과 바인딩 업데이트를 할 수 있다. 바인딩 업데이트가 끝나면 두 노드사이는 정상적인 통신을 할 수 있고 공격자에 의해 위험에 노출 될 수 있다. 또한 CoIT 메시지를 보내면 CN에서는 토큰을 생성하게 되므로 공격자가 다수의 기기를 획득해 CN에게 계속 CoIT를 보내면 계속 토큰을 만들어야 하므로 다른 정상적인 노드의 통신을 방해할 수 있다. 따라서 이 논문에서는 이러한 RR프로토콜에 대한 문제점을 분석하고 이러한 문제점을 해결 할 수 있는 개선 방안을 논의 해본다.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.12
• /
• pp.1301-1304
• /
• 1997

Elimination reactions of (E)-2,4-dinitrobenzaldehyde O-pivaloyloxime promoted by R2NH/R2NH2+ buffer in 70% MeCN(aq) have been studied kinetically. The reaction exhibited second order kinetics and general base catalysis with Bronsted β=0.45. The Hammett ρ value decreased from 2.3 to 1.6 as the base-solvent system was changed from DBU in MeCN to R2NH/R2NH2+ buffer in 70% MeCN(aq). From these results an E2 mechanism is proposed.

• Journal of The Korean Astronomical Society
• /
• v.36 no.4
• /
• pp.271-282
• /
• 2003

We present results of a $H^{13}CN$ J=1-0 mapping survey of molecular clouds toward the Galactic Center (GC) region of $-1.6^{\circ}{\le}{\iota}{\le}2^{\circ}$ and $-0.23^{\circ}{\le}b{\le}0.30^{\circ}$ with 2' grid resolution. The $H^{13}CN$ emissions show similar distribution and velocity structures to those of the $H^{12}CN$ emissions, but are found to better trace the feature saturated with $H^{12}CN$ (1-0). The bright components among multi-components of $H^{12}CN$ line profiles usually appear in the $H^{13}CN$ line while most of the dynamically forbidden, weak $H^{12}CN$ components are seldom detected in the $H^{13}CN$ line. We also present results of other complementary observations in $^{12}CO$ (J=1-0) and $^{13}CO$ (J=1-0) lines to estimate physical quantities of the GC clouds, such as fractional abundance of HCN isotopes and mass of the GC cloud complexes. We confirm that the GC has very rich chemistry. The overall fractional abundance of $H^{12}CN$ and $H^{13}CN$ relative to $H_2$ in the GC region is found to be significantly higher than those of any other regions, such as star forming region and dark cloud. Especially cloud complexes nearer to the GC tend to have various higher abundance of HCN. Total mass of the HCN molecular clouds within $[{\iota}]{\le}6^{\circ}$ is estimated to be ${\~}2 {\times}10^7\;M_{\bigodot}$ using the abundances of HCN isotopes, which is fairly consistent with previous other estimates. Masses of four main complexes in the GC range from a few $10^5$ to ${\~}10^7\;M_{\bigodot}$ All the HCN spectra with multi-components for the four main cloud complexes were investigated to compare the line widths of the complexes. The largest mode (45 km $s^{-1}$) of the FWHM distributions among the complexes is in the Clump 2. The value of the mode tends to be smaller at the farther complexes from the GC.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.254-262
• /
• 2019

The impact of free cyanide ($CN^-$) and thiocyanate ($SCN^-$) on the $CN^-$ (CDO) and $SCN^-$ degraders (TDO) to nitrify and denitrify aerobically was evaluated under alkaline conditions. The CDO's were able to nitrify under cyanogenic conditions, achieving $NH_4{^+}-N$ removal rates above 1.66 mg $NH_4{^+}-N.L^{-1}.h^{-1}$, except when $CN^-$ and $SCN^-$ loading was 15 mg $CN^-/L$ and 50 mg $SCN^-.L^{-1}$, respectively, which slightly inhibited nitrification. The TDO's were able to achieve a nitrification rate of 1.59 mg $NH_4{^+}-N.L^{-1}.h^{-1}$ in the absence of both $CN^-$ and $SCN^-$, while the presence of $CN^-$ and $SCN^-$ was inhibitory, with a nitrification rates of 1.14 mg $NH_4{^+}-N.L^{-1}.h^{-1}$. The CDO's and TDO's were able to denitrify aerobically, with the CDO's obtaining $NO_3{^-}-N$ removal rates above 0.67 mg $NO_3{^-}-N.L^{-1}.h^{-1}$, irrespective of the tested $CN^-$ and $SCN^-$ concentration range. Denitrification by the TDO's was inhibited by $CN^-$, achieving a removal rate of 0.46 mg $NO_3{^-}-N.L^{-1}.h^{-1}$ and 0.22 mg $NO_3{^-}-N.L^{-1}.h^{-1}$ when $CN^-$ concentration was 10 and 15 mg $CN^-.L^{-1}$, respectively. However, when the CDO's and TDO's were co-cultured, the nitrification and aerobic denitrification removal rates were 1.78 mg $NH_4{^+}-N.L^{-1}.h^{-1}$ and 0.63 mg $NO_3{^-}-N.L^{-1}.h^{-1}$ irrespective of $CN^-$ and $SCN^-$ concentrations.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.spc8
• /
• pp.2955-2959
• /
• 2011

Second-order rate constants for nucleophilic substitution reactions of 2,4-dinitrophenyl benzenesulfonate 1a with a series of alicyclic secondary amines in MeCN have been measured spectrophotometrically and compared with those reported previously for the corresponding reactions performed in aqueous medium to investigate the effect of medium on reactivity and reaction mechanism. The amines employed in this study are found to be more reactive in the aprotic solvent than in $H_2O$. The reactions of 1a in MeCN result in a linear Br${\o}$nsted-type plot with ${\beta}_{nuc}$ = 0.58, which contrasts to the curved Br${\o}$nsted-type plot reported previously for the corresponding reactions performed in the aqueous medium (i.e., ${\beta}_2$ = 0.86 and ${\beta}_1$ = 0.38). Accordingly, it has been concluded that the reaction mechanism changes from a stepwise mechanism to a concerted pathway upon changing the medium from $H_2O$ to MeCN. Reactions of Y-substituted phenyl benzenesulfonates 1a-c with piperidine in MeCN result in a linear Br${\o}$nsted-type plot with ${\beta}_{lg}$ = -1.31, indicating that expulsion of the leaving group is significantly more advanced than bond formation in the transition state. The trigonal bipyramidal intermediate ($TBPy^{\pm}$) proposed previously for the reactions in $H_2O$ would be highly unstable in MeCN due to strong repulsion between the negative charge in $TBPy^{\pm}$ and the negative dipole end of MeCN. Thus, destabilization of $TBPy^{\pm}$ in MeCN has been concluded to change the reaction mechanism from a stepwise mechanism to a concerted pathway.

• Korean Journal of Environment and Ecology
• /
• v.25 no.2
• /
• pp.235-246
• /
• 2011

This study explored the relationship between connectedness to nature (CN) and belief on consequences (social, economic, and ecological) of establishing cable car and supportiveness to its establishment in a natural park. It also examined the relationship between socio-demographic and visiting characteristics and CN. Data were collected from 134 visitors in Mudeungsan Provincial Park (MPP) in September, 2010 through field questionnaire survey. CN was measured by using a connectedness to nature scale (CNS) revised from the Mayer and Frantz's (2004) original CNS. CN consisted of two factors: interdependence and independence. CN increased as respondents' age, education level, number of visits to MPP and number of visits to Jungbong area of MPP increase. Respondents with higher CN ratings showed stronger beliefs on negative consequences of the cable car establishment. CN, however, was not related with beliefs on positive consequences of establishing cable cars. Respondents with higher CN showed lower support about establishing cable cars.

• Journal of Korean Academy of Nursing
• /
• v.48 no.1
• /
• pp.12-25
• /
• 2018

Purpose: This study was performed to develop the Job Satisfaction Scale for Clinical Nurses (JSS-CN) and verify its validity and reliability. Methods: A preliminary 42-item version of the JSS-CN was developed through literature reviews and in-depth interviews. The draft scale was developed using thirty-seven items selected following content validity evaluation. Finally, thirty-three items with response options on a 5-point Likert scale were selected based on internal consistency reliability and construct validity. Subsequently, the test-retest reliability and convergent validity of the JSS-CN were verified. Results: Six factors, namely, recognition from the organization and professional achievement, personal maturation through the nursing profession, interpersonal interaction with respect and recognition, accomplishment of accountability as a nurse, display of professional competency, and stability and job worth, were identified, which explained 59.7% of the total variance. The JSS-CN's Cronbach's ${\alpha}$ for the total scale was .95, and the intra-class correlation coefficient was .90. The correlation coefficient between the scores of the JSS-CN and Slavitt's scale was .75, and that between the JSS-CN and job performance was .53. Conclusion: Results showed that the JSS-CN has good reliability and validity. Therefore, it is concluded that the JSS-CN could be a useful tool for the measurement of the job satisfaction of clinical nurses in Korea.