• Science of Emotion and Sensibility
• /
• v.23 no.2
• /
• pp.51-60
• /
• 2020

This study aimed to develop a modular smart clothing system for heart rate monitoring that reduces the inconvenience caused by battery charging and the large size of measurement devices. The heart rate monitoring system was modularized into a temporary device and a continuous device to enable heart rate monitoring depending on the requirement. The temporary device with near-field communication (NFC) and heart rate sensors was developed as a clothing attachment type that enables heart rate monitoring via smart phone tagging when required. The continuous device is based on Bluetooth Low Energy (BLE) communication and batteries and was developed to enable continuous heart rate measurement via a direct connection to the temporary device. Furthermore, the temporary device was configured to connect with a textile electrode made of a silver-based knitted fabric designed to be located below the pectoralis major muscle for heart rate measurement. Considering the user-experience factors, key functions, and the ease of use, we developed an application to automatically log through smart phone tagging to improve usability. To evaluate the accuracy of the heart rate measurement, we recorded the heart rate of 10 healthy male subjects with a modular smart clothing system and compared the results with the heart rate values measured by the Polar RS800. Consequently, the average heart rate value measured by the temporary system was 85.37, while that measured by the reference device was 87.03, corresponding to an accuracy of 96.73%. No significant difference was found in comparison with the reference device (T value = -1.892, p = .091). Similarly, the average heart rate measured by the continuous system was 86.00, while that measured by the reference device was 86.97, corresponding to an accuracy of 97.16%. No significant difference was found in terms of the heart rate value between the two signals (T value = 1.089, p = .304). The significance of this study is to develop and validate a modular clothing system that can measure heart rates according to the purpose of the user. The developed modular smart clothing system for heart rate monitoring enables dual product planning by reducing the price increase due to unnecessary functions.

• The Korean Nurse
• /
• v.35 no.2
• /
• pp.71-91
• /
• 1996

The objectives of thes study were to identify the need for equipment development in nursing, and to determine the priorities for that development. The study was descriptive study done between March 2 and May 30, 1995, in which the subjects, including 421 patients, 223 family members, and 198 nurses from neurosurgery, orthopedic, rehabilitation medicine, internal medicine and intensive care units of nine general hospitals in Seoul, completed a questionnarie developed by the research team. The questionnaire consisted of 35 open and closed questions. Data was analyzed using frequencies and percentages. The results ware summarized as follows: 1) The average age of the nurses was 27.9 years, 48% of the patients were between 20 and 40 years of age, and 17% were over 60. The average lingth of experience for the nurse subjects was four years five months with 36.9%. having over five years experience. The most frequent diagnoses of patients were spinal disc(35.9%), internal medicine disease(26.0%), cerebral vascular accident(16.6%) and spinal cord injury(10%) 2) Many of the nurses(96.4%) reported deficiencies with existing equipment and 96.5% of the nurses, but only 79.8% of the patients, nurses' time. Further, 82.3% of the nurses and 75.8% of the patients felt that the development of new equipment would lead to a decrease in the cost of nursing care. 3) Nurses felt that the greatest areas of inconvenience were patient feeding(71.7%), hygiene(71.2%), caring for a patient confined to bed(70.7%), patient clothing(67.2%), mobility transfers(63.5%) and urinary elimination(52.0%). However, patients and family members listed the following as being the most inconvenient: urinary elimination(58.7%), Hygiene(50.5), feeding(48.4%), mobility transfers(47.1%) and bed care(45.2%). 4) Generally the nurses listed more inconveniences and patients and family members listed more demands for the development of equipment. These included utensils with large handles, and regulators for tube feedings; mattresses that provide for automatic position change and massage, which have patient controlled levers and a place for bed pan insertion; automatic lifts or transfer from bed to wheelchair; equipment to facilitate washing and oral hygiene as well as equipment that will allow patients with spinal cord injuries easy access to showers; a bed pan/urinal for women that is comfortable and effective from which urine can be measured and disposed of easily; disposable dressing sets and tracheostomy care sets and a convenient way of measuring changes in wound size; a safe delivery system for oxygen, a variety of mask sizes and better control of humidity, tracheal material than at present, as well as a communication system for patients with tracheostomies; clothing that will allow access to various parts of the body for treament or assessment without patients having to remove all of their clothing; and finally a system that will allow the patient to control lighting, telephones and pagers. Priority areas for equipment development reported by the nurses were, urinary elimination(58. 7%), hygiene(50.5%), feeding(48.4%), mobility transfers(47..1%), bowel elimination(40.8%). Those reported by the patients family members were feeding(71.7%), hygiene(70.0%), bedcare(70.7%), clothing(67.2%), mobility transfers(63.6%), urinary elimination(52.9%) and bowel elimination(50.5%) Altogether, nurses, patients and family members listed the following as priorities; clothing (178), bed care(144), urinary elimination(92), environment(81), hygiene(70). Further, a health professional forum listed urinary elimination, oxygen delivery, medication delivery, mobility transfers, bed care and hygiene in that order as priority areas. From this study it can be concluded that the first need is to develop equipment that will address the problems of urinary elimination. To do (l)This nurses who are interested in equipment development should organize an equipment development team to provide a forum for discussion and production of equipment for nursing.

• Journal of the Korean Society of Costume
• /
• v.57 no.1 s.110
• /
• pp.147-162
• /
• 2007

The purpose of this study is to grasp the inconvenience and problems with caregivers' uniforms and preferred designs by examining the wearing conditions of these uniforms in medical welfare facilities for the aged. To attain this purpose, a questionnaire was completed by direct observation and by interviewing caregivers in specialized hospitals for the aged and those engaged in nursing and then a preliminary examination was carried out. The questionnaire was given to 228 caregivers. Following are the results of this research. It was found that the caregivers in medical welfare facilities for the aged were women in their 50s, wearing primarily a size 77 uniform. It was revealed that when the caregivers bathe patients, they usually get wet from the knees to the bottom part of their pants and many of them (61.2%) change both their tops and pants after giving a bath. The caregivers said that every part of the tops of existing uniforms, except the armpits, were a little large or too long. It turned out that the area of the armpits, the front buttons, crotch, hip area, and knees are mostly the areas that readily wear out in the uniforms. It was reported that the uncomfortable parts in the uniforms a.e the armpits, shoulders, and the front adjusting parts of the tops and the hips, thighs, and the crotches of the pants. The material for the uniforms have problems in ventilation, fluffing, absorption of sweat, and permeation of odor.

• Journal of Families and Better Life
• /
• v.20 no.6
• /
• pp.197-208
• /
• 2002

The purpose of this study was to investigate the economic lives of single households with the age of 30 through less than 50. The economic life was examined in three aspects; income, assets, and consumption expenditures and patterns. One hundred sixty single households were surveyed, with questionnaires for 15days from April 1 to April 15 of 2002, and analyzed with descriptive statistics. The results were as follows: about 30.8% of total single households in the sample were in the income group of 1,500,000 thought less than 2,000,000 won. The size of income for the 30's was less than that for the 40's. Compared with male single households, female single households were more in both low and high levels of income. The saving rate tended more or less to be low. The more the age, the higher the saving rate. As for debt, the 40's single households, male single households, high school single households (compared to the 30's single households, female single households, university and graduate single households, respectively) were relatively higher. In general, the single households tended to have debts due to preparation for housing, credit over use. The assets tended to be managed by themselves. The economic preparation for the old life was done by banking system rather than insurance. The average monthly living costs was higher in the age of the 40's single than the age of the 30's single. The living costs of the female single households was higher or lower than those of the male single households. As for consumption patterns, there was the most in the expenditure allocation for food away from home, then for culture entertainmentㆍsocial life, and for clothing and shoes. As for the convenience of the consumption life in overall, there were more responses in moderation and inconvenience than in convenience.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.8
• /
• pp.161-168
• /
• 2022

In this study, a survey on the wearing satisfaction of commercial men's upper body correction underwear was conducted targeting mildly obese men in their twenties, and it was intended to suggest improvement points for the correction underwear. The product used for the study was Adapt's 95 PROBLEM, and 15 subjects were selected as males in their 20s with a BMI of 25-30 (mild obesity). As a result, men's awareness and interest in corrective underwear were low. In the wearing satisfaction survey, 74% of those who answered negatively that it was uncomfortable to wear and take off. In terms of pressure relief, 60% of those who felt the pressure was strong at the beginning, but as time passed, they got used to it and answered that there was no major inconvenience. However, with regard to digestion after a meal, 40% of the subjects felt that the pressure interfered with digestion. There were many deficiencies in terms of functionality, with more than half of those who responded negatively with regard to stuffiness and heat, and many negative opinions regarding sweat absorption and discharge. In the visual section, positive reaction was shown in chest, side waist and front waist correction, and among them, the front waist had the highest score. In conclusion, it seems that functional parts related to heat and sweat must be improved in consideration of the stuffiness and indigestion brought about by excessive pressure for men's upper body correction underwear.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.441-447
• /
• 2023

Lead(Pb), which is currently mainly used for shielding purposes in the medical radiation, has excellent radiation shielding functions, but is continuously exposed to radiation directly or indirectly due to the harmfulness of lead itself to the human body and the inconvenience caused by its heavy weight. Research on shielding materials that are human-friendly, lightweight, and convenient to use that can block risks and replace lead is continuously being conducted. In this study, based on the commonly used polyethylene terephthalate (PET) film and the fabric material used in actual radiation protective clothing, a multi-layer thin film was realized through sputtering and vacuum deposition of bismuth, tungsten, and tin, which are metal materials that can shield radiation. Thus, a shielding film was produced and its applicability as a radiation shielding material was evaluated. The radiation shielding film was manufactured by establishing the optimized conditions for each shielding material while controlling the applied voltage, roll driving speed, and gas supply amount to manufacture the shielding film. The adhesion between the parent material and the shielding metal thin film was confirmed by Cross-cut 100/100, and the stability of the thin film was confirmed through a hot water test for 1 hour to measure the change of the thin film over time. The shielding performance of the finally realized shielding film was measured by the Korea association for radiation application (KARA), and the test conditions (inverse wide beam, tube voltage 50 kV, half layer 1.828 mmAl) were set to obtain an attenuation ratio of 16.4 (initial value 0.300 mGy/s, measured value 0.018 mGy/s) and damping ratio 4.31 (initial value 0.300 mGy/s, measured value 0.069 mGy/s) were obtained. by securing process efficiency for future commercialization, light and shielding films and fabrics were used to lay the foundation for the application of films to radiation protective clothing or construction materials with shielding functions.

• Fashion & Textile Research Journal
• /
• v.13 no.4
• /
• pp.600-613
• /
• 2011

The purpose of this study is to provide Torso pattern for Korean middle-aged women using 3D human body scan data. 155 women in their 40's or 50's were measured by Martin's anthropometry. Merging the data of 914 middle aged women provided by Korean agency for technology and standards, total of 1,069 subjects' data were analyzed. For data analysis, ANOVA, factor analysis and cluster analysis were done using SPSS PC+. And representative subject of each cluster was selected and they participated in 3D scanning and Torso pattern suggested for middle-aged women Torso pattern which investing the amount of ease according to each group for diffuse front interscye 30%, armscye circumference 30%, back interscye 40% using 3D human body scan data. The results of this study are as follows. Firstly, as a result of the factor analysis, the first factor was 'obesity index of body', The second factor was 'verticality size of body', The third factor was 'verticality length of upper bodice', The fourth factor was 'drop value to represent silhouette', and the fifth factor was 'physique of upper bodice'. And, middle-aged women type were classified 3 types according to the cluster analysis. Type 1(Y-type) was the long upper Torso with wide shoulder. Type 2(H-type) was flat-body type with comparatively thin upper bodice and thin lower bodice. And type 3(A-type) was the obese type with comparatively thin upper bodice and fat lower bodice. Secondly, using CAD program, point filtering was performed and approximated surface model was made. It used that generated surface smoothing corrected for abnormally extruded points and scattered points based on the curvature information. And 3D surfaces were flatted onto the plane by the internal tools of CAD program. Difference ratios of outline length and area between 3D curves and 2D plane were 0.42% and 0.54%, respectively. Third, wearing test by the sensory evaluation showed that distinct difference almost every category. The movement functionality test shows that, in all the tests which reveal significant differences, especially, 'comparison pattern A' experienced inconvenience to neck width and neck depth.

• Korean Journal of Veterinary Service
• /
• v.38 no.4
• /
• pp.241-248
• /
• 2015

This study was aimed to investigate factors that affected the status of wearing personal protective equipment (PPE) for handling poultry carcasses with potential exposure to virulent avian infectious agents. A large outbreak of high pathogenic avian influenza (HPAI) occurred in South Korea in 2014. Many public officers participated for euthanizing and handling livestock carcass. However, several safety issues with using PPE were revealed. Therefore, a questionnaire survey was conducted for 340 people who participated euthanasia and carcass disposal in the place where HPAI mainly occurred in 2014. It was found that 31.8% of the respondents had ever taken off their protective equipment during operations because of its inconvenience. The most inconvenient PPE was goggles (54.6%), followed by mask (20.2%), latex gloves (11.6%), shoe covers (5.9%) and protective clothing (5.3%). The main complaints about this individual PPE was unclear sight, damp emitted toward eye, sweating, tearing easily and sweating, respectively. Considering such problems of PPE, new possible directions for improvement of gloves and goggles were suggested. With newly developed rubber coating fabric gloves and conventionally using latex and fabric gloves, H3N2 influenza virus transmission experiment was conducted. Rubber coating fabric gloves showed similar efficiency for blocking virus transmission with latex laboratory gloves and were not easily torn by sharp claws of chicken. In addition, air flow control safety eyewear was suggested to minimize moisture formation. The air flow control system efficiently suppressed moisture formation inside the goggles. Therefore our study will provide more specific directions about new PPE development for safety protection of actual wearers.

• Journal of the Korean Society of Costume
• /
• v.55 no.1 s.91
• /
• pp.25-42
• /
• 2005

Costume is a formative art expressed by active human unlike the field of other living formativeness, and an expression of social actions based on a style of culture in a period. Therefore, costume has a deep connection with a mode of living and is recognized as a 'culture for living', and is more characteristic culture than all metaphysical cultures including architecture, craft, painting, and sculpture. Therefore, it expresses wearer's status or social standing, and furthermore, ideas and values of the times with aesthetic features in their form, color, materials, and pattern, so it is expressed as a mirror reflecting the phases of the times as. Korean costume had been dressed until the period of the Joseon Dynasty without a great change and started to be simplified in a simple style on the grounds of inconvenience in behaviors with the opening of an interchange of Western culture in the civilized period. And, this movement had been continued and Korean costume had been applied as an everyday dress under the name of 'Reformed Korean Costume'. Since the middle phase of 1980s, it aroused many people's interests with the introduction of designs focused on activity and convenience. In 1990's, many people had taken a growing interest in Korean costume with development of various designs keeping pace with the internationalization period and Korean Costume had been revitalized under the name of 'The Modernized Korean Costume'. And, since the 21st century, the advanced communication and full-scaled import of Western fashion have made the introduction of many fashion information in the world into Korea, affected greatly the fashion market, led consumers' sensitivity on a trend to be increased. Therefore, a design accepting a trend 'The Modernized Korean Costume' with fashions has risen. Second, this study is an attempt to suggest a revitalization method of domestic casual Korean costume brands by developing and suggesting competitive and highly value-added products with connection of practicality, variety, and highly sensitive fashion styles. For theoretical study, domestic and foreign literatures, academic journals, professional monthly magazines, and newspapers were examined. And, a process of change and features of the Korean fashion since the civilization period, and concept, features and images of casual Korean costume were analyzed, On the basis of analyzing image, features, and consumers' preference of the modernized Korean costume, a design development plan was established and 10 suits of costume were designed and made.

• Journal of Environmental Health Sciences
• /
• v.40 no.6
• /
• pp.454-468
• /
• 2014

Objectives: This study was conducted to investigate the actual condition of the farm work environment and personal protective equipment as part of the effort to improve livestock work for the safety and health of poultry farmers and provide basic data for establishing plans to improve and develop personal protective equipment. Methods: For this purpose, a questionnaire survey on general information about stables, the poultry work environment, accidents, the wearing of work clothes and personal protective equipment, and the level of awareness related to personal protective equipment was conducted among 148 poultry farmers. Results: As a result, it was found that poultry workplace environment was exposed to such risks as fine dusts; organic dusts; poisonous gases; odorous substances; chicken excrement; contact with chickens, bacteria or viruses; and accidents related to machine operation. Thirteen percent of respondents suffered severe respiratory diseases, and the most frequently injured sites due to accidents were the hands (25.7%), knees (23.8%), arms (17.3%), and head (10.9%). The most frequent type of accident was collisions between the body and obstacles or machinery during movement (36.4%), followed by erroneous machine operation such as feeders and electric shocks (8.5%). Regarding the wearing of work clothes and personal protective equipment, 51.7% of the respondents wore worn-out clothing or everyday clothes, whereas only 32.0% wore work clothes. The percentage of farmers who wore proper protective equipment for the work environment during poultry work was 48.4%. The most frequently used type of protective equipment was boots (38.9%), followed by mask (36.7%), gloves (36.3%), appropriate work clothes (22.6%), quarantine clothes (17.6%), helmets (13.4%), and goggles (12.6%). The rate of wearing goggles was low because they were considered inconvenient and lowered work efficiency. Furthermore, they purchased everyday products available on the market for their personal protective equipment which were not appropriate for maintaining safety in an actual harmful environment and its consequent risks. As a result of the survey of the awareness level related to personal protective equipment, their levels of awareness of accidents and attitude proved to be average or higher, but the practice of wearing protective equipment and the level of knowledge and management of personal protective equipment were lower. Conclusion: This survey found that the wearing status of personal protective equipment among poultry farmers was insufficient even though they were exposed to risks. Most respondents were aware of the necessity of wearing personal protective equipment and of the potential for accidents, but they did not wear proper protective equipment. Their wearing rate was low due to a lack of knowledge about protective equipment, as well as the inconvenience of wearing it. Therefore there is a need to improve and develop specialized personal protective equipment for respiration, hands, and eyes, as well as work clothes that can protect farmers from major harmful matter that is generated in the poultry workplace. Based on the results of this investigation, we will conduct further studies on the required performance and design directions of personal protective equipment while collecting more objective data through field-oriented assessments.