• 한국화재소방학회논문지
• /
• 제25권2호
• /
• pp.132-137
• /
• 2011

부속실 단독가압의 제연설비 구역에서 계단실 출입문의 크기 변화가 개방 및 폐쇄조건에 미치는 영향을 분석하기 위해서 자동폐쇄장치의 구조와 저항모멘트의 관계를 정리하였으며, 부속실 출입문의 크기 변화를 고려하여 개방력과 폐쇄력을 측정하였다. 그 결과 부속실 출입문의 크기가 증가할수록 개방 및 폐쇄조건에 도달하기 위한 힘의 크기는 증가하였으며, 폐쇄시간, 회전속도, 회전각도와 힘의 관계, 자동폐쇄장치의 효율을 고려한 부속실 출입문의 설계범위가 존재함을 확인하였다.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.41-47
• /
• 2021

In this study, the hinges of heavy weight doors were designed and analyzed in line with the trend that built-in appliances are becoming larger and the weight of doors is also increasing. The main specification of the heavy weight door hinge is to allow the deflection at the end of the door to be less than 2 mm when opening and closing, including the automatic closing, slow closing, and closing force control functions. The structural analysis of the design mechanism, component design, and methods for improving the deflection are as follows: 1) Mechanism of the automatic closing function should sense automatically using the spring compression force at a specific angle by the contact between the cam and the cam module roller. 2) Through structural analysis, the maximum stress of the door was found in the link pin hole connected to the pin at each link. 3) Consequently, the pin holder was designed and applied, with little variance, but up to 93% of the specification limit.

• Bulletin of the Korean Chemical Society
• /
• 제29권4호
• /
• pp.847-850
• /
• 2008

Novel mercaptophenyl carbocyclic C-nucleoside analogue was synthesized via a cyclopentenol intermediate 10, which was prepared using a sequential [3,3]-sigmatropic rearrangement and ring-closing metathesis (RCM). Friedel-Crafts alkylation was then used to couple the thiophenol.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.181-184
• /
• 1999

The purpose of this study is to find on the Current Change and Residual current in Final closing section of Seamangum the sea dike . The M2 current was calculated in two case of the two and three point Final closing section. The residual currents are calculated diagnositically from the observed water temperature and salinity data and wind data and tidal residual current.

• Bulletin of the Korean Chemical Society
• /
• 제24권9호
• /
• pp.1289-1292
• /
• 2003

An efficient synthetic route for preparing novel $4'{\alpha}$-C phenyl branched carbocyclic nucleoside is described. The installation of phenyl group at the $4'$-position of carbocyclic nucleoside was successfully accomplished via a sequential [3,3]-sigmatropic rearrangement and ring-closing metathesis (RCM) beginning from simple ketone such as 2-hydroxy acetophenone.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2004년도 봄 학술발표논문집 Vol.31 No.1 (B)
• /
• pp.700-702
• /
• 2004

모자이크는 설러 장의 영상을 하나의 큰 영상으로 만드는 것을 말한다. 본 논문은 asymmetrical closing이라고 불리는 모폴로지에 의한 closing operator를 사용한 영상 모자이크에 관한 연구이다. asymmetrical closing을 하기 위한 structuring element를 소개하고 이것을 이용한 코너 정 추출 방법 및 local maxima에 대해서도 소개한다. 여러 개의 코너 정들 중 조건을 만족하는 tie point들을 이용하여 Perspective 변환 파라미터를 추출하여 최종 모자이크 결과 영상을 생성하게 된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1698-1703
• /
• 2004

To understand the high expansion effects by adopting intake closing time in the cases of compensating intake air-mass and effective compression ratio simultaneously, fundamental study was carried out by using RICEM realizing Atkinson cycle. Intake air-mass and effective compression ratio were compensated by increasing supercharged pressure and geometric compression ratio. The results showed that the increasing rates of expansion ratio and expansion-compression ratio were increased by compensating both a intake air-mass and effective compression ratio the same tendencies were obtained with the increases of compression ratio and cut off ratio It was also found that LIVC has more advantages in expansion ratio and effective work than those of EIVC under above conditions.

• 물과 미래
• /
• 제8권2호
• /
• pp.65-74
• /
• 1975

The east coast seems to have remarkably different features from the west and south coast in the geographical, geomorphological, and oceanographical senses. In this paper the auther wishes to introduce some results of investigation morphological characteristics of the river mouth in the east coast an of analysis of it's causes. There are various closing form in river mouth by many causes, but the east coast hs the same closing form(the ratio of closing; roughly 0.18), as well known, by the sand spit, and has not hydrological but littoral drift background. The river of the east coast is proved mature age from hypsometric analysis. The wave and longshore current must be principal factor to be considered, in the analysis of the closing phenomenon owing to littoral drift. The research of the blown sand is considered valuable for the next study of this subject.

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.163-170
• /
• 2002

The dynamic model of a high-speed vacuum circuit breaker mechanism with spring-actuated cam and linkage is derived to simulate the high-speed closing and opening operations. Its validation for an analysis of high-speed motion behavior is checked through experiments. The characteristics of the friction on the camshaft are investigated using the nonlinear pendulum experiment. The parameters of the friction model are estimated using the optimization technique. The analysis exhibits that the friction of the pendulum depends on stick-slip, Stribeck effect and viscous damping. Comparing simulation results with actual responses using a high-speed camera, the appropriateness of derived dynamic models for the rapid closing and opening operations is shown. The spring motion, which has much influence on the closing responses, is observed.

• Journal of Construction Engineering and Project Management
• /
• 제3권2호
• /
• pp.49-57
• /
• 2013

A sea dike construction has been increased in Korea because of the actively deployed reclamation project in basis of efficient application in land. The degree of completion in sea dike construction is affected by final closing construction, which has a lot of uncertainty that often results in higher accidents rate. Therefore, this research identified risk factors of final closing construction and classified them. This research examines the likelihood and its impact for each risk factor and calculates the risk degree as to the risk matrix. Based on this, the impact and the environmental conditions that affect to risk factors are investigated and further responsive methods are established for each risk factor. Ultimately, this research attempts to provide the risk retrenchment method for inspectors by proposing risk estimation model, responsive action list, and risk management process.