• 대한의용생체공학회:의공학회지
• /
• 제23권4호
• /
• pp.309-315
• /
• 2002

1980년대에 동물과 인체에 이식한 기계식 인공 판막으로부터 핏트(pit)가 발견된 이래 그 원인으로 캐비테이션 현상이 주목받고 있다. 심실 압력 구배(dp/dt), 최대 폐쇄속도, 스퀴즈 유동 등과 같은 다양한 요소가 캐비테이션 발생의 임계값으로 연구되고 있다. 현재에는 기계식 판막의 표면 괴식의 원인으로서는 폐쇄직전에 발생하는 스퀴즈 유동과 수격현상 등이 주목받고 있다. 본 연구에서는 자연 심장에 비교적 가까운 압력 조건하에서 강체 홀더와 유연성을 부가한 홀더를 이용하여 모델 밸브의 디스크의 폐쇄 운동 및 밸브 표면 부위의 압력 변화를 측정하였다 실험 결과 모든 홀더에서 디스크 표면 근처에서 수증기 압력 이하의 압력 저하가 예상되었다. 또한 폐쇄 직전의 속도가 증가할수록 밸브의 표면 괴식도 증가하였다. 이들의 결과로부터 폐쇄 직전의 판막의 속도가 표면 괴식에 큰 영향을 미친다고 생각됐다.

• 한국수자원학회논문집
• /
• 제37권8호
• /
• pp.613-622
• /
• 2004

Non-Darcy 제체내 침투수 흐름과 배수갑문을 통한 흐름의 특성을 고려한 최종체절의 수리특성분석 모형에 의한 해석결과는 실측자료와 잘 일치하여 개발된 모형의 적용성이 있음을 보여주었다. 실측치와의 비교에서 본간(1985) 식에 의한 계산결과가 나정우(1987)에 의한 방법보다 비교적 정확함을 보여주었다. 아울러 완전 또는 불완전 월류의 구분이 없이 완전월류식에 잠수도를 이용한 유량계수식을 사용한 나정우 식의 사용성을 보여 주었다. 본간 식과 나정우 식에 의한 계산 값이 실측치보다는 유출입 특성이 크게 나타나 현장에서 체절구간의 불규칙적인 단면 양상을 감안한 유량계수의 조정이 필요할 것으로 판단된다. 일반적으로 최종체절의 수리특성 분석에서 제체구간의 침투수 흐름의 고려는 Darcy 흐름에 기초하여 분석하여왔다. 제체내 침투수의 유량과 개방구간을 통과하는 유량의 비가 체절구간이 좁을수록 크게 나타나, 제체내 침투수의 정확한 해석에 의한 체절구간의 수리특성을 분석해야할 필요가 있다.

• 대한치과보철학회지
• /
• 제27권1호
• /
• pp.55-81
• /
• 1989

Recently the instantaneous center concept has been to understand the biomechanics by which a tissue derangement causes a mechanical derangement in human joint. Therefore, to understand the biomechanics of temporomandibular joint (T.M.J.) as a part of human joint, it is necessary to clarify the instantaneous center of rotation (I.C.R.) in the mandibular movement. Twenty male subjects without T.M.J. disorder and mandibular deviation during the mandibular movement were selected for this study. The habitual opening and closing paths were recorded on the paper of the sagittal metal plate by two pencil markers connected to the resin open clutch attached on the lower teeth, which was designed for this study. The coordinates of the 33-target points and the 109-anatomical landmarks were obtained using a Summagraphic digitizer connected to a 18AT computer. The original raw data of the opening and closing paths were smoothed by B-spline curve fitting technique and then the I.C.R. pathways were determined mathematically by the computer using algorithm for finding the I.C.R. of a planer rigid body model. Also the opening and closing movements of the mandible were simulated according to the determined I.C.R. The results obtained from this study were as follows. 1. At the early opening and the last closing, I.C.R's were almost distributed around the mastoid process outside the mandibular body without the presence in the region of the mandibular condyle. 2. The I.C.R. pathway showed variable patterns to each subject at the opening and closing movements. 3. The K constant with uniform pattern was obtained by the rotation angle times the radius, which was assumed to the index of the mandibular movement. 4. The opening and closing movements of the mandible were simulated by the I.C.R. pathways at the habitual opening and closing movements. 5. The mandibular condyle was rotated or translated accordng to the relative rotation angle and radius of the determinant factors of K contant.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1674-1685
• /
• 2022

The ball valve is an important device in the pipeline transportation system of nuclear power plants. Its operational stability and safety directly affect the normal working of nuclear power plants. In this study, the transient numerical simulation of the opening and closing process of a ball valve was conducted on the basis of the flow interruption capability experiment of the ball valve by using the moving mesh method and inlet and outlet variable boundary conditions. The flow rate and pressure difference with time of the opening and closing process of the ball valve were studied. The internal flow characteristics of the ball valve under different relative openings were analyzed in conjunction with the typical back-step flow structure. Results show that the transient numerical results agree well with the experimental results. The internal flow characteristics of the ball valve are similar at the same opening during opening and closing process. At small opening, the spool and outlet channels easily form a back-step flow structure. The disappearance and generation of backflow vortices during opening and closing occur at 85% opening and 75% opening, respectively. With the decrease in opening degree, the difference in vortex core area in the flow channel of the ball valve spool in the opening and closing process gradually appears. The research results provide some reference value for the design and optimization of ball valves.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.157-158
• /
• 2023

Doors that are opened and closed when entering or exiting a general building are connected to the door frame and open and close. They are equipped with door locking devices of various structures, and are either locked to the door frame for the closing operation or released from the door frame for the opening and closing operation. Here, a single-stage door binding device having a door latch that is independently disposed at the center of one axis of the door is commonly used. On the other hand, if the size of the door is over a certain size or if the door is medium to large, the opening and closing operation may not be performed smoothly with only a single stage binder, or the closing state may not be achieved stably during the closing operation. In particular, in the case of the single-stage binding device provided in medium to large fire doors, the door is fixed to the door frame unstable, causing fatal errors in the fire prevention function of the fire door. Accordingly, in order to fundamentally solve these problems, we researched and developed a three-stage door binding machine that combines a top and bottom fastening structure with a single-stage fastening structure. This 3-stage door binder not only has the fire resistance performance of a fire door, but also has a T-shaped terminal in its fastening method, so if you eliminate the upper and lower fastening, it is a 1-stage binder like a regular product, but if you remove the door latch of the 1st-stage binder, it functions as an upper and lower 2-stage binder and forms a single mold. We researched and developed a three-stage door binder that can manufacture and produce three products at the same time, satisfying both product performance and price.

• 지역연구
• /
• 제9권2호
• /
• pp.103-119
• /
• 1993

This research examines the spatial development of rural industrial estates (Nong-gong Jigu) in Chonbuk province and gives insight into the strategies for economic development in the entire region. Selected location factors which are likely to pull new investment into the estates are examined by using questionnaires. Few loction factors except nonlocal factors can be found in explaining why location choices are made. The irrelevance of the analysis based on location factors suggests that an alternative approach should analyze changes in the spatial development of the rural industrial estates. Such an alternative is to understand the dynamics of the spatial organization of production by focusing on characteistics of plant closing in the rural industrial estates. To take into account of the characteristics of plant closing we provide the hypothesized relationships between employment size, organizational structure, inter and intra industrial linkage, characteristics of production processes, and availability of local labor market and the likelihood of closing. A logit model is then made to identify the selected factors which might influence the probability of plant closing. The results from the logit analysis and their implications suggest that the policy should be more concerned with the characteristics of firms, such as size and ownership, as well as of the local labor markets. Given that the Chonbuk region has experienced rapid population decline, together with its poor industrial base, it seems that the success of the policy in the declined rural areas in less certain.

• Journal of Oral Medicine and Pain
• /
• 제8권1호
• /
• pp.43-60
• /
• 1983

In order to obtain the basic data for diagnosis of occlusion the author investigated the occlusal sounds produced by mandibular closing movement from rest position to centric occlusion by using the Korotkoff sounds microphone electrodes and physiograph for Korean 20S without TMJ problems. And the author analyzed the correlation of the occlusal sounds with height, body weight, mandibular closing movement distance, maxillary sinus size and masseter muscle activities relating to the production of occlusal sounds. The obtained results were as follows : 1. The occlusal sounds prouduced by mandibular closing movements from rest position to centric occlusion were ranged from 3.08mV to 52.00mV, their maen value 19.07mV in right side, and ranged from 2.41mV to 18.33mV, their mean value 9.19mV in left side in group of Angel's class I occlusion subjects having right habitual side of mastication. 2. In general the occlusal sounds in the habitual side of mastication were greater than those in the opposite side. 3. The correlations of the occlusal sounds with height and maxillary sinus size were not significant. 4. The correaltions of the occlusal sounds with body weight, mandibular closing movement distance and masster muscle activities were significant.

• 대한의용생체공학회:의공학회지
• /
• 제13권4호
• /
• pp.285-298
• /
• 1992

An analysis of the dynamics in the closing phase of the occluder of a mechanical monoleaflet heart valve prosthesis is presented. The dynamic analysis of the fluid in the vicinity of the occluder was based on the control vo]use approach. The backflow velocity of the fluid was computed by applying the continuity, Bernoulli's and momentum equations in the unsteady state. By considering the fluid pressure and gravity as external forces acting on the occluder, the moment equilibrium on fine occluder was employed to analyze the motion of the occluder during closing and the force of impact between the occluder and the guiding struts. Occluder comes to rest after several oscillations in about 10-18 msec after the Inltiaton of closing. As the aortic pressure increases, the occludes closes faster and comes to the final resting position earlier and the impact force increases also. But backflow is not af footed by the variation of the aortic pressure. With decreasing time delay of the ventricle pressure, the occluder closes faster and impact force Increases. The computed magnitudes of the occluder tiP velocities as well as the backflow of the fluid during the closing phase using this model were in agreement with previously reported experimental measurements.

• 한국분무공학회지
• /
• 제20권3호
• /
• pp.141-148
• /
• 2015

In order to research engine characteristics of spark-ignited engine with intake valve closing timing change for Miller cycle, two cam for LIVC(Late Intake Valve Closing) were designed and fabricated an prototype valvetrain. And intake valve closing timing were adjusted to build low compressing and high expansion cycle for HEV. In experimental study, it were investigated with different engine speed, spark timing and air-fuel ratio to compare base cam and LIVC cam type. It was found that the volumetry efficiency and effective work of compression process were decreased in case of LIVC cam. When compared with the existing results, the maximum pressure in the cylinder was reduced about 12~13 bar and the volumetric efficiency was reduced about 16%.

• Journal of Oral Medicine and Pain
• /
• 제42권1호
• /
• pp.16-19
• /
• 2017

Clinicians are familiar with limitation of opening mouth caused by temporomandibular disorders. Sometimes, patients also complain of difficulty in closing mouth. Difficulty in closing mouth can be caused by anterior, posterior disc displacement, and subluxation of temporomandibular joint (TMJ). In this report, we presented a patient who had a difficulty in both opening and closing mouth. The patient complained of TMJ noises and intermittent limitation of opening mouth, and inability to get teeth back into maximal intercuspal position. Magnetic resonance images revealed that the left TMJ had an anterior disc displacement with relative posterior disc displacement. We reviewed the possible causes, signs and symptoms, and treatment for difficulty in closing mouth with related literatures.