• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.44-57
• /
• 2013

In this paper, we propose a femtocell searching technique which can prevent a macrocell UE(user equipment) from losing synchronism to its serving macrocell near closed access femtocells in co-channel deployment due to the leakage of femtocell signals by using a CS(Common Signal). The CS, commonly transmitted by femtocells in a macrocell at the same time, enables the macrocell UEs to be kept synchronized with their serving macrocells since the CINR(Carrier to Interference and Noise Ratio) of base stations in macrocell can be kept high even near closed access femtocells. Also, the CS is designed in such a way that a macrocell UE can recognize the existence of femtocell by using the metric CSCINR(Common Signal Carrier to Interference and Ratio) measured with CS. In addition, the proposed femtocell searching technique can reduce the frequency of femtocell searching trial by using the metric on mobility of a macrocell UE defined in this paper, and the reduction of the frequency of handover trial can be also expected as a byproduct.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.4
• /
• pp.362-368
• /
• 2012

The objective of this study is to image the harmonic wave generated by contact acoustic nonlinearity in obliquely incident ultrasonic wave for early detection of closed cracks. A closed crack has been simulated by contacting two aluminum block specimens producing solid-solid contact interfaces and then acoustic nonlinearity has been imaged with contact pressure. Sampling phased array(SPA) and synthetic aperture focusing technique(SAFT) are used for imaging techniques. The amplitude of the fundamental frequency decreased with appling pressure. But, the amplitude of second harmonic increased with pressure and was a maximum amplitude at the simulation point of closed crack. Then, the amplitude of second harmonic decreased. As a result, harmonic imaging of contact acoustic nonlinearity is possible and it is expected to be apply for early detection of initial cracks.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.4
• /
• pp.459-468
• /
• 2021

In patients with myasthenia gravis, it is difficult to manufacture and maintain dentures because the muscles and nervous system in the oral cavity are not properly adjusted. In addition, excessively extended or thick dentures may cause muscle weakness by stimulating the muscles, so dentures should be manufactured in consideration of this. In this case, a denture was fabricated using the closed mouth technique in a patient with myasthenia gravis with mouth opening limitation. Using the closed mouth technique, the patient's masticatory pressure and muscle movements were reproduced and denture with good retention were manufactured.

• The Journal of the Korean dental association
• /
• v.33 no.8 s.315
• /
• pp.543-546
• /
• 1995

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.4
• /
• pp.1-6
• /
• 2008

The burning characteristics of HTPB/AP solid propellants were measured by closed bomb of internal volume of 200 cc and 700 cc up to 30,000 psia. The burning rates of closed bomb method showed good agreement with those of strand burner method between 1,000 psia and 5,000 psia, and the sharp increment of pressure exponent(n) around 6,000 psia as a result of testing in accordance with loading densities. The burning rate measured in 200 cc and 700 cc of internal volume of closed bomb agreed well without the relation of internal volume size.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.466-469
• /
• 2001

In this paper, closed loop V/f control of induction motor has been implemented by the estimated speed. Closed loop V/f control improve the performance of induction motor drive system at low speed compared to open loop V/f control. However, closed loop V/f control need speed sensor. By using the estimated speed, closed loop V/f control is possible without speed sensor. Rotor speed is calculated from the difference between synchronous frequency and slip angular frequency. 3-phase voltage reference is obtained from synchronous frequency. And the PWM technique using space vector PWM is applied in this scheme. In the space vector PWM, effective time of 3-phase voltage reference is used to simplify the calculation of effective voltage time. This scheme is simple to implement and one chip microprocessor was used in experimental system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.7
• /
• pp.683-687
• /
• 2007

In last decades, several linearization methods for the AOA measurements have been proposed, for example, Gauss-Newton method and Closed-Form solution. Gauss-Newton method can achieve high accuracy, but the convergence of the iterative process is not always ensured if the initial guess is not accurate enough. Closed-Form solution provides a non-iterative solution and it is less computational. It does not suffer from convergence problem, but estimation error is somewhat larger. This paper proposes a Self-Tuning Weighted Least Square AOA algorithm that is a modified version of the conventional Closed-Form solution. In order to estimate the error covariance matrix as a weight, a two-step estimation technique is used. Simulation results show that the proposed method has smaller positioning error compared to the existing methods.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.15 no.2
• /
• pp.151-160
• /
• 2011

Typically, it is hard to find a closed form solution of option pricing formula under an asset governed by a change point process. In this paper we derive a closed-form solution of the valuation function for an American perpetual put option under an asset having a change point. Structural changes are formulated through a change-point process with a Markov chain. The modified smooth-fit technique is used to obtain the closed-form valuation function. We also guarantee the optimality of the solution via the proof of a corresponding verification theorem. Numerical examples are included to illustrate the results.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.485-489
• /
• 2006

In last decades, several linearization methods for the AOA measurements have been proposed, for example, Gauss-Newton method and closed-form solution. Gauss-Newton method can achieve high accuracy, but the convergence of the iterative process is not always ensured if the initial guess is not accurate enough. Closed-form solution provides a non-iterative solution and it is less computational. It does not suffer from convergence problem, but estimation error is somewhat larger. This paper proposes a self-tuning weighted least square AOA algorithm that is a modified version of the conventional closed-form solution. In order to estimate the error covariance matrix as a weight, two-step estimation technique is used. Simulation results show that the proposed method has smaller positioning error compared to the existing methods.

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.157-162
• /
• 2010

In this paper, We propose that the adaptive cooperative relay transmission technique using closed-loop MIMO scheme for duplex communication system. As the mobility between relay and base station is little, closed-loop MIMO is better diversity gain than open-loop MIMO. At this time, more than one relaying terminals are included in one cooperative group to share their transmission and take precoding weight feedback. For minimization of throughput reduction caused by increasing feedback bits, we use codebook-based MRT that limit the number of feedback bits. Among the cooperative relay group, the best relays are selected from the base stataion and get the feedback. A protocol senarios are also proposed for this relay system.