• The Journal of Korean Physical Therapy
• /
• 제31권1호
• /
• pp.13-17
• /
• 2019

Purpose: This study examined the effects of flexible flatfeet on the accuracy of knee joint motions in closed and open kinetic chain tasks. Methods: Twenty-four healthy participants were recruited for this study. The subjects were divided into two groups using a navicular drop (ND) test: flexible flatfoot group (n=12, male: 6, aged $22.00{\pm}2.22years$) and age-matched control group (n=12, males: 6, aged $22.17{\pm}1.53years$). The accuracy of knee motion was measured quantitatively by tracing through the flexion and extension motion of the knee joints in the closed kinetic chain and the open kinetic chain. Results: There was a significant difference in the accuracy index between the groups in closed kinetic chain task, but there was no significant difference in the open kinetic chain task. In addition, there was a significant difference in the accuracy index between the closed kinetic chain and the open kinetic chain task in the flexible flatfoot group. In addition, a significant negative correlation was observed between the ND and accuracy index in the closed kinematic chain task, but there was no significant relationship between the ND and accuracy index in the open kinematic chain task. Conclusion: Flexible flatfeet can affect the accuracy of the adjacent joints, such as the knee joint in the closed kinematic chain.

• 말소리와 음성과학
• /
• 제2권4호
• /
• pp.223-228
• /
• 2010

This study investigated the closed quotient and other voice quality parameters using electroglottography (EGG) in sustaining the vowel /a/ and reading a sentence at the comfortable pitch and loudness in healthy Korean adults. Seventy two healthy adults (36 men, 36 women) aged 20~40 years were included in the study. The tasks were recorded and analyzed using Lx Speech Studio. In vowel sustaining task, closed quotient (Qx), fundamental frequency (Fx), sound pressure level (SPL), Jitter, and Shimmer were measured. In sentence reading task, closed quotient (DQx), fundamental frequency (DFx), and sound pressure level (DAx) were measured. The sex effects were observed on Qx, Fx, Shimmer, DQx, and DFx. Men had significantly higher Qx and DQx than women, but had significantly lower Shimmer than women. However, there was no sex effect on Jitter. The task effects on Qx and SPL as well as DQx and DAx were also assessed. Qx and SPL were significantly higher than DQx and DAx in both gender. This study showed that the closed quotients in both vowel sustaining and sentence reading tasks were significantly related to other voice quality parameters. Therefore, clinicians and researchers should describe the voice quality parameters like fundamental frequency, sound pressure level, Jitter, Shimmer, and so on when reporting closed quotients using EGG.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제43권2호
• /
• pp.163-175
• /
• 2004

We believe new assessment strategies and practices need to be developed that will enable teachers and others to assess students' performance in a manner that reflect the 7th Korean curriculum reform vision for school mathematics. This research was conducted to develop the assessment tasks based on the current literatures such as National Council of Teachers of Mathematics (1999) and Korea Institute of Curriculum & Evaluation(KICE, 2002, 2003) in quadratic functions of the secondary school and to find the effect of these tasks by classifying students' responses. The research instrument were composed of three criteria, the previous knowledge, the application of quadratic functions, and the general properties in functions. The research data were collected from 32 high school students in a suburb of Seoul and sorted by their similarities and differences in mathematical understanding. Through the research, we could know more than ever before about how the students learned mathematics and about how to improve teachers' mathematical instruction.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1063-1067
• /
• 1991

In this paper, we present a supervision and coordination level monitoring the adaptive controller and taking appropriate ,actions if malfunctions are detected. Supervision and coordination level are consist of start-up part and run-time part. The start-up part involves tasks for the configuration and the implementation of controllers, and the run-time part involves tasks for the supervision and coordination of the controllers in closed-loop operation. Also, we show how a supervision level and a coordination level can be designed and what basic elements should be included. Finally, we show the robustness of this scheme by experimental results for task model.

• Smart Structures and Systems
• /
• 제24권5호
• /
• pp.587-595
• /
• 2019

Deformation measurement of large scale structures, such as the ground beds of high-rise buildings, tunnels, bridge, and railways, are important for insuring service quality and safety. The pose-relay videometrics method and displacement-relay videometrics method have already presented to measure the pose of non-intervisible objects and vertical subsidence of unstable areas, respectively. Both methods combine the cameras and cooperative markers to form the camera series networks. Based on these two networks, we propose two novel videometrics methods with closed-loop camera series network for deformation measurement of large scale structures. The closed-loop camera series network offers "closed-loop constraints" for the camera series network: the deformation of the reference points observed by different measurement stations is identical. The closed-loop constraints improve the measurement accuracy using camera series network. Furthermore, multiple closed-loops and the flexible combination of camera series network are introduced to facilitate more complex deformation measurement tasks. Simulated results show that the closed-loop constraints can enhance the measurement accuracy of camera series network effectively.

• Architectural research
• /
• 제15권1호
• /
• pp.9-15
• /
• 2013

Effects of physical attributes of workstation enclosures on the performance of office workers with different difficult levels of office tasks and moods are presented. Performance scores in complex tasks were expected to increase with greater workstation enclosures while those in simple tasks would be the same. Mood ratings were expected to be higher in lower workstation enclosures. Performance of 102 college students on ambient office sounds (45 dBA) with office tasks were measured for 100 minutes under three different workplace enclosures: (1) four foot partitions on two sides; (2) six foot partitions on three sides; and (3) a fully enclosed workstation with eight foot partitions. The tasks were to memorize a paragraph with 130 words (complex task) and to search phone numbers (simple task). The complex task performance in the fully enclosed workstation was increased compared to that in the workstation with four foot partitions (p < 0.001) and to that in the workstation with six foot partitions (p < 0.05). However, occupants in the fully enclosed workstation with office sounds without speech generally gave higher mood ratings. It indicates that closed individual offices may offer important contributions to collaborative work as well as individual productivity. These findings would help design community revise open plan design to increase collaboration among office workers.

• 정보처리학회논문지A
• /
• 제10A권3호
• /
• pp.181-188
• /
• 2003

본 논문에서는 IRIS(Increasing Reward with Increasing Service) 태스크들을 위한 기존 온-라인 최적 알고리즘에 근접한 총가치(total reward)를 생성하면서 보다 낮은 스케줄링 복잡도를 가진 휴리스틱(heuristic) 온-라인 스케줄링 알고리즘을 제안한다. 기존 알고리즘들은 총가치를 최대화하기 위해 시스템 내의 모든 태스크들을 스케줄링 대상으로 고려한다. 따라서 이들 알고리즘들은 많은 태스크들을 가진 실제 시스템에 적용하기에는 매우 놀은 시간 복잡도를 가진다. 제안 알고리즘은 시스템 내의 모든 태스크들을 대상으로 스케줄링하는 것이 아니라, 상수 W개의 태스크들을 선택하여 이들을 대상으로 스케줄링 한다. 제안 알고리즘은 W개의 태스크를 어떤 기준에 의해 선택할 것인가를 규정하는 테스크 선택정책에 기반을 두고 있으며, 간단하면서도 직관적인 두 가지 선택정책과 이 둘을 통합한 보다 일반화된 선택정책을 제안한다. 스케줄링 대상을 축소함으로써 제안 알고리즘의 복잡도를 O(Wn)로 줄일 수 있었다. 다양한 성능실험 결과 알고리즘 평균 계산 빈도는 O(W)에 더 가깝다는 것을 확인할 수 있었다.

• Industrial Engineering and Management Systems
• /
• 제13권1호
• /
• pp.52-66
• /
• 2014

Promotion of a closed-loop supply chain requires disassembly systems that recycle end-of-life (EOL) assembled products. To operate the recycling disassembly system, parts selection is environmentally and economically carried out with non-destructive or destructive disassembly, and the recycling rate of the whole EOL product is determined. As the number of disassembled parts increases, the recycling rate basically increases. However, the labor cost also increases and brings lower profit, which is the difference between the recovered material prices and the disassembly costs. On the other hand, since the precedence relationships among disassembly tasks of the product also change with the parts selections, it is also required to optimize allocation of the tasks in designing a disassembly line. In addition, because information is required for such a design, the recycling rate, profit of each part and disassembly task times take precedence among the disassembly tasks. However, it is difficult to obtain that information in advance before collecting the actual EOL product. This study proposes and analyzes an optimal disassembly system design using integer programming with the environmental and economic parts selection (Igarashi et al., 2013), which harmonizes the recycling rate and profit using recyclability evaluation method (REM) developed by Hitachi, Ltd. The first stage involves optimization of environmental and economic parts selection with integer programming with ${\varepsilon}$ constraint, and the second stage involves optimization of the line balancing with integer programming in terms of minimizing the number of stations. The first and second stages are generally and mathematically formulized, and the relationships between them are analyzed in the cases of cell phones, computers and cleaners.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권1호
• /
• pp.5-10
• /
• 2001

A method is proposed to obtain the Jacobian matrix of the 5 -bar parallel manipulator by employing the orthogonality between position and velocity vectors of rotating rigid-body around a fixed point. The dynamics of the 5-bar parallel manipulator is analyzed and utilized to design the computed-torque controller by developing a transformation matrix of the passive joints with respect to the active ones. In experimental demonstration, it shows that high-speed and accuracy tasks are performed by the proposed computed-torque control.

• 대한통합의학회지
• /
• 제5권2호
• /
• pp.11-17
• /
• 2017

Purpose : The aim of this study was to verify differences in cervicocephalic joint position sense error after different sustained sitting postures in healthy young adults. Methods : Twenty-five healthy adults(12 men, 13 women) participated in this study. Repositioning errors of neck movement were observed in participants during joint repositioning tasks. During 2 test days with a 1-week interval, the participants performed forward head posture and upright sitting posture in random order. Both head-to-neutral(HTN) and head-to-target(HTT) tasks were performed on each day. On the first day, the participants sat slouched or upright for 10 minutes. Then, they sat upright and moved their heads at a self-selected speed with their eyes-closed to pre-determined neutral and target positions as accurately as possible. The participants noticed that when they reached a pre-determined position, the errors between pre-determined neutral and target positions and current position was recorded. The tasks consisted of flexion, extension and lateral bending. On the second day, the same test was performed after another sitting posture for 10 minutes. Repositioning error values were collected by using a smart phone-based inclinometer. The mean value for three trials was used for data analysis. A paired t-test was used for statistical analysis. Results : Significant differences in joint repositioning errors were found between the repositioning error after different sitting postures on the sagittal plane for both the HTN and HTT tasks (P<.05). No significant differences in errors on the coronal plane were found (P>.05). Conclusion : Cervicocephalic joint position sense can be affected by sitting postures, especially on the sagittal plane.