• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.32
• /
• pp.53-62
• /
• 1994

This paper deals with the analysis of the PC communication service system performance which will be installed as a gateway between PSTN and PSDN. Firstly, we classify the data traffic pattern into interactive, conversational, and file transfer type from the actual statistics. Secondly, we model the system structure as a closed queueing network model with multiservers and multiple customer classes and derive the analytic method to be able to measure the system performance using Mean Value Analysis. Finally, the simulation results indicate that the analytic method obtained is a good approximation method to measure the system performance of the PC communication service system as a gateway between PSTN and PSDN.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.1
• /
• pp.1-4
• /
• 2012

In this paper, the planar type modified folded loop antennas for S-DMB band is proposed. The proposed antenna consisted of opened center of a conventional closed loop and folded terminal of microstrip line to inside loop antenna. The sizes proposed antenna was minimized by folding the terminal of the loop. Also, It was minimized reactance value by increasing capacitances between coupled microstrip line. Therefore the proposed antennas compacted about 20% than a conventional loop antenna and increased efficiency of antenna. The proposed antennas got an omni-directional pattern, the antenna gain was 3.67 [dBi] and the bandwidth was 900 MHz (2.6-3.56 GHz) with VSWR${\leq}$2 from the simulated and the measured results. The frequency utilization coefficient was 29.9 %. These properties could satisfy the S-DMB band.

• Journal of applied mathematics & informatics
• /
• v.16 no.1_2
• /
• pp.371-381
• /
• 2004

In this paper, fuzzy metric spaces are redefined, different from the previous ones in the way that fuzzy scalars instead of fuzzy numbers or real numbers are used to define fuzzy metric. It is proved that every ordinary metric space can induce a fuzzy metric space that is complete whenever the original one does. We also prove that the fuzzy topology induced by fuzzy metric spaces defined in this paper is consistent with the given one. The results provide some foundations for the research on fuzzy optimization and pattern recognition.

• Journal of Educational Research in Mathematics
• /
• v.9 no.1
• /
• pp.121-132
• /
• 1999

We have compared Korean and American mathematics curriculums in 5 areas: whole number(concepts and its operations); geometry; pattern and relations; measurements; statistics and probability. We have found significant differences in geometry area. Korean curriculums contain simple planar figures (circles, triangles, rectangles, and squres) and some of the spatial figures until 3rd grades. But in America they learn various planar and spatial fugures(cone, pyramid, triangular prism, etc) since the 1st grade starts. They also start the 1st grade by dealing with topological concepts like open/closed, inside/outside, order, etc. As the grade goes on, students learn other geometrical concepts like congruence, symmetry, 3-dimensional views. We also found that American curriculum focuses on students' activities and courages communication through projects, groupwork, journal writing, etc. It's also superior in respects of motivation, and connections with real life and other subjects. Korean curriculum needs more improvements in these aspects. Furthermore for lower graders reviewing sections need to be enhanced for feedback.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.152-155
• /
• 1996

Platinum thin films were deposited on $Al_2$O$_3$substrate by DC magnetron sputtering for RTD(Resistance Thermometer Devices) temperature sensors. We made Pt resistance pattern on $Al_2$O$_3$substrate by lift-off method and fabricated Pt-RTD temperature sensors by using W-wire, silver epoxy and SOG(spin-on-glass). In the temperature range of 25~40$0^{\circ}C$, we investigated TCR(temperature coefficient of resistance) and resistance ratio of Pt-RTD temperature sensors. TCR values were increased with increasing the annealing temperature, time and the thickness of Pt thin films. Resistance values were varied lineally within the range of measurement temperature. At annealing temperature of 100$0^{\circ}C$, annealing time of 240min and thin film thickness of 1${\mu}{\textrm}{m}$, we obtained Pt-RDT TCR value of 3825ppm/$^{\circ}C$ closed to the Pt bulk value.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.4
• /
• pp.552-558
• /
• 1999

Ventilation of the marine engine room is very important for the health of the workers as well as the normal operation of machines. To find proper ventilation conditions of this engine room numerical simulation with a standard k-$\varepsilon$model was carried out. In the present study the marine engine room is considered as a closed space with a heat source and forced ventilation ducts. The injection angle of air supply is found to be important. Injection with a downward angle depresses recirculation flow causing a strong stream in the wider space of the room Ventilation and removal of the released heat are promoted with this pattern, There is a possibility of local extreme heating at the upper surface of the engine when supply and exhaust ports of air are in bilateral symmetry.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.5
• /
• pp.678-685
• /
• 1999

A UBET program is developed for determining flash the optimum sizes of preform and initial billet in plane-strain closed-die forging. The program consists of forward and backward tracing processes. In the forward program, flash, die filling and forging load are predicted. In backward tracing process the optimum dimensions of initial billet and preform are determined from the final-shape data based on flash design. Experiments are carried out with pure plasticine billets ar room temperature. The theoretical predictions of forging load and flow pattern are in good agree-ment with the experimental results.

• Journal of Environmental Science International
• /
• v.6 no.3
• /
• pp.239-247
• /
• 1997

The numerical experiments using a particle tracking model have been performed for predicting the change of water Quality and shoreline. In present study, comparison of the numerical model results with the analytic solution shows that the point of the mainmum concentration and the distribution pattern is very similar. The reflection effect from the boundary was newly Introduced for making clear the effect of the closed boundary which set limits to application of a particle tracking model. The present model seems to reappear physical phenomenon well. This model shows well qualitative appearance of pollutant diffusion in Kwangan beach. Therefore, this model is regarded as a useful means for predicting diffusion movement of suspended sand, and change of water quality.

• The Journal of the Korean dental association
• /
• v.57 no.11
• /
• pp.654-663
• /
• 2019

This case report describes the management of a 30-year-old woman with hopeless mandibular first molars and right maxillary second premolar. The treatment plan included mandibular second and third molar protraction after extraction of mandibular first molars. Mini-implants were placed between roots of first and second premolar. Sliding mechanics with lever arm was used to prevent inclination of molars. A good functional occlusion was achieved in 38 months without clinically significant side effects. Most of the extraction space of mandibular first molar was closed by protraction of second and third molars. The skeletal Class II pattern was improved by counterclockwise rotation of mandible through reduction of wedge effect. Mandibular molar protraction with orthodontic mini-implants in adequate cases would be a great alternative to prosthetic implant and reduce the financial and surgical burden of patients.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.1
• /
• pp.41-44
• /
• 2015

In cognitive radios, exponentially distributed idle period(EIP) is considered in this paper. In the EIP case, durations of idle periods are be limited and varied by primary traffic arrivals. Accordingly, we first analyze the idle period utilization which can be achieved by the slotted ALOHA in cognitive radio communications. The idle period utilization is a newly defined performance metric to measure the transmission performance of the secondary network as effective time durations utilized for successful secondary transmissions in an idle period. Then, the idle period utilization is maximized through controlling the data transmission time. All technical processes are mathematically analyzed and expressed as closed form solutions.